76 Chevy Scottsdale 350 4x4 proj. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

my69camaro1 · 12-14-2004, 05:43 AM

Trucks has a very good running 350, newer edelbrock intake and carb.
1/2ton

The th350 tranny is shot, no gears at all. Have it almost ready to come out, 4 cross member bolts. Has a NP205 transfer case I believe, not full time. Body has its' share of rust (not horrible), bent hood, cracked window. Frame is good and straight. Long bed. Has a 4in Rancho lift. Sitting on little Nissan rims/tires. Has a clean title ready to go. Trucks blue. I have no digital camera, only a camera phone. Number 1 (219) 363-7819.
Was thinking around $450 neg

Here's the bad part, location is Laramie Wyoming. Not really close to anything.
Bought to make an off road beater but need money. Currently attending WyoTech. Could possible help deliver if someone paid for a u-haul within a couple hrs.

my69camaro1 · 12-15-2004, 05:03 AM

$400? ?

Paso76GMCstepper · 12-15-2004, 04:00 PM

what type of lift is it (springs or blocks).

Would u sell just the lift parts??

cochino12 · 12-15-2004, 04:24 PM

I might need just a motor, I can meet you 1/2 way from denver

my69camaro1 · 12-15-2004, 04:43 PM

I have no way to remove most (big) parts, right now the truck is sitting on the road by a friends apartment. I think it has a two in block in the back but I would have to make sure. I'll go look today.

Buy the motor and get a free truck?

12-14-2004, 05:43 AM	#1
my69camaro1 Young One Join Date: Oct 2003 Location: La Porte Indiana Posts: 138	76 Chevy Scottsdale 350 4x4 proj. Trucks has a very good running 350, newer edelbrock intake and carb. 1/2ton The th350 tranny is shot, no gears at all. Have it almost ready to come out, 4 cross member bolts. Has a NP205 transfer case I believe, not full time. Body has its' share of rust (not horrible), bent hood, cracked window. Frame is good and straight. Long bed. Has a 4in Rancho lift. Sitting on little Nissan rims/tires. Has a clean title ready to go. Trucks blue. I have no digital camera, only a camera phone. Number 1 (219) 363-7819. Was thinking around $450 neg Here's the bad part, location is Laramie Wyoming. Not really close to anything. Bought to make an off road beater but need money. Currently attending WyoTech. Could possible help deliver if someone paid for a u-haul within a couple hrs.

12-15-2004, 04:00 PM	#3
Paso76GMCstepper Registered User Join Date: Jan 2004 Location: Paso Robles, CA Posts: 347	what type of lift is it (springs or blocks). Would u sell just the lift parts?? __________________ Tony "Life is a Team Sport" To the memory of the Hendrick Motorsports Plane Crash Victims

12-15-2004, 04:24 PM	#4
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	I might need just a motor, I can meet you 1/2 way from denver __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

12-15-2004, 04:43 PM	#5
my69camaro1 Young One Join Date: Oct 2003 Location: La Porte Indiana Posts: 138	I have no way to remove most (big) parts, right now the truck is sitting on the road by a friends apartment. I think it has a two in block in the back but I would have to make sure. I'll go look today. Buy the motor and get a free truck? __________________ 69 R/S Camaro 79 K5 86 M1008 11 P71 Vic 12 Ram 3500 18 Ram 2500

12-15-2004, 05:03 AM	#2
my69camaro1 Young One Join Date: Oct 2003 Location: La Porte Indiana Posts: 138	$400? ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.