Anyone Rhino lined the interior of Blazer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Reumster · 07-02-2002, 05:44 PM

I was wanting to rhino line the interior of my blazer, then carpet over it. I thought about putting a thin coat on the bed rail tops so the top won't scratch the paint off. Any one done it? And also thought about Rhino lining a bra on the hood. Anyone ever done this? Price?

PushinPebbles · 07-02-2002, 06:04 PM

why though?!?!.........................my mom has perma-tex in her dodge and in her 87 chevy.................this stuff is a whole lot better then line-X, rhino etc............its like the stuf that they dip screw drivers in...................the screw drivers that look like rubber but feel really good???..................any ways................if u dont climb rocks(assuming u dont because ur 2WD) then why cover a part of the hood............................jack

lofly'a · 07-02-2002, 07:05 PM

i must admit that spraying on a bra is a novel and cool idea reumster. i don't care much for hood bras even though they are functional for chips, but you just may have started a new customizing craze and increased the spray-on liner industries future profit margins. i would almost bet that someone will see it done before summer is over.

Reumster · 07-03-2002, 06:38 PM

Yeah I thought of the Rhino Lined Bra hood thing along time ago, when I noticed bad chipping on my hood. I hate regular bras, plus they don't make them for our trucks! LOL

But does anyone have a price doing the full interior of a blazer?

Jack that's not to bad a idea the plastic dip stuff. I wonder if you can get it in a 5 gal barrel? But I'm not sure it will adhere to the surface as good as a spray on. What is the best spray in liner?

dion · 07-03-2002, 07:43 PM

My buddy did it to his Blazer and it came out nice but he really needs to put carpet over it.

LeRoy · 07-03-2002, 08:19 PM

I was quoted $400 to do my Blazer from up under the dash all the way back and over the rear rails. If you do it over the rear rails make sure you go real thin. It'll make a difference in putting the top back on. I tried using canopy weather stripping once on the rails and the top to windshield pillar bolts wouldn't line up right. Another idea, I did, was to use stainless bedrails for our style pickup trucks. I just cut them down to fit my K5. They do a good job of covering up the screwed up paint from the top. I think it looks good and adds more shiney stuff

70 Jimmy · 07-03-2002, 10:13 PM

I've heard good things about these guys. http://www.rattleguard.com/index.htm. Never seen it though.

lofly'a · 07-03-2002, 10:55 PM

hey reumster,

there is a company that makes a bra for our trucks. i've only seen them advertise in street rodder magazine. i'll go look for the name and info now..........................................................................
............................okay, found it

Wardlow Custom Masks
2680 Atlantic Ave.
Long Beach, CA 90806
562-424-9850
562-490-3463
562-989-0311 fax

they make a lot of different vintage car & truck bras like 31-58 chevy car, and 34-72 chevy truck

PushinPebbles · 07-03-2002, 11:28 PM

Noo......the shight im talking about is shot through a gun........................hehe must be a huge nozzle..............good stuff
.........................Jack

70 Jimmy · 07-04-2002, 11:58 AM

They use a cheap undercoating gun.

67_chevy_67 · 07-04-2002, 04:44 PM

ive seen a 4x4 blazer with the exterior completly rhino coated

if u know any one with a 67 chev c-10 shortbox tell them to email me at rylan_hodge@hotmail.com

07-02-2002, 05:44 PM	#1
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	Anyone Rhino lined the interior of Blazer? I was wanting to rhino line the interior of my blazer, then carpet over it. I thought about putting a thin coat on the bed rail tops so the top won't scratch the paint off. Any one done it? And also thought about Rhino lining a bra on the hood. Anyone ever done this? Price? __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

07-02-2002, 06:04 PM	#2
PushinPebbles My dad's 68 Join Date: May 2002 Location: VA Posts: 444	why though?!?!.........................my mom has perma-tex in her dodge and in her 87 chevy.................this stuff is a whole lot better then line-X, rhino etc............its like the stuf that they dip screw drivers in...................the screw drivers that look like rubber but feel really good???..................any ways................if u dont climb rocks(assuming u dont because ur 2WD) then why cover a part of the hood............................jack __________________ Jack M. 67 C-10 SWB 355 built T-350 tranny hurst shifter 17x8in KMC's on michelins, clear tails and back up lights slammedUPDATE i have decided on my bag setup and will post further info when i recieve all the parts **************************** 88 1/2 ton suburban 4x4 350/700R-4having a 9 in lift w/ 38 in tires 4 12 inch Lightning Audios *************************** 87 silverado 3/4ton jacked up 10-12 inches black and rubberized bed coating 35 in michelans ************************** Dad's truck 68 C-10 stepside, 468 BB, tubbed, weld wheels, Nason black,lots more **************************** grand dads truck 68 C-10 stepside fuel inj. 350/700R-4soon in audi silver **************************** 84 toyota pickup 22R 5 speed 2WD slammed, shaved and all the body lines filled w/ buickGN scoop,bout to be sprayed in 2003 mustang green metallic w/ silver flames **************************** S/N=BIGGYTYME@aol.com (hydros) "No fat chics, truck will scrape"

07-02-2002, 07:05 PM	#3
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	i must admit that spraying on a bra is a novel and cool idea reumster. i don't care much for hood bras even though they are functional for chips, but you just may have started a new customizing craze and increased the spray-on liner industries future profit margins. i would almost bet that someone will see it done before summer is over. __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project

07-03-2002, 06:38 PM	#4
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	Yeap Yeah I thought of the Rhino Lined Bra hood thing along time ago, when I noticed bad chipping on my hood. I hate regular bras, plus they don't make them for our trucks! LOL But does anyone have a price doing the full interior of a blazer? Jack that's not to bad a idea the plastic dip stuff. I wonder if you can get it in a 5 gal barrel? But I'm not sure it will adhere to the surface as good as a spray on. What is the best spray in liner? __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

07-03-2002, 07:43 PM	#5
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	My buddy did it to his Blazer and it came out nice but he really needs to put carpet over it. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

07-03-2002, 08:19 PM	#6
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	I was quoted $400 to do my Blazer from up under the dash all the way back and over the rear rails. If you do it over the rear rails make sure you go real thin. It'll make a difference in putting the top back on. I tried using canopy weather stripping once on the rails and the top to windshield pillar bolts wouldn't line up right. Another idea, I did, was to use stainless bedrails for our style pickup trucks. I just cut them down to fit my K5. They do a good job of covering up the screwed up paint from the top. I think it looks good and adds more shiney stuff __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me Last edited by LeRoy; 07-03-2002 at 08:21 PM.

07-03-2002, 10:13 PM	#7
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	I've heard good things about these guys. http://www.rattleguard.com/index.htm. Never seen it though. __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

07-03-2002, 10:55 PM	#8
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	hey reumster, there is a company that makes a bra for our trucks. i've only seen them advertise in street rodder magazine. i'll go look for the name and info now.......................................................................... ............................okay, found it Wardlow Custom Masks 2680 Atlantic Ave. Long Beach, CA 90806 562-424-9850 562-490-3463 562-989-0311 fax they make a lot of different vintage car & truck bras like 31-58 chevy car, and 34-72 chevy truck __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project

07-03-2002, 11:28 PM	#9
PushinPebbles My dad's 68 Join Date: May 2002 Location: VA Posts: 444	Noo......the shight im talking about is shot through a gun........................hehe must be a huge nozzle..............good stuff .........................Jack __________________ Jack M. 67 C-10 SWB 355 built T-350 tranny hurst shifter 17x8in KMC's on michelins, clear tails and back up lights slammedUPDATE i have decided on my bag setup and will post further info when i recieve all the parts **************************** 88 1/2 ton suburban 4x4 350/700R-4having a 9 in lift w/ 38 in tires 4 12 inch Lightning Audios *************************** 87 silverado 3/4ton jacked up 10-12 inches black and rubberized bed coating 35 in michelans ************************** Dad's truck 68 C-10 stepside, 468 BB, tubbed, weld wheels, Nason black,lots more **************************** grand dads truck 68 C-10 stepside fuel inj. 350/700R-4soon in audi silver **************************** 84 toyota pickup 22R 5 speed 2WD slammed, shaved and all the body lines filled w/ buickGN scoop,bout to be sprayed in 2003 mustang green metallic w/ silver flames **************************** S/N=BIGGYTYME@aol.com (hydros) "No fat chics, truck will scrape"

07-04-2002, 11:58 AM	#10
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	They use a cheap undercoating gun. __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

07-04-2002, 04:44 PM	#11
67_chevy_67 Registered User Join Date: Jul 2002 Location: BC,CANADA Posts: 34	ive seen a 4x4 blazer with the exterior completly rhino coated if u know any one with a 67 chev c-10 shortbox tell them to email me at rylan_hodge@hotmail.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.