my guage doesnt work. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyC10Stepside · 12-19-2004, 09:15 PM

how do i tell if my volt guage is bad? it does nothing as of right now.

67ChevyC10Stepside · 12-19-2004, 10:17 PM

ttt

Longhorn Man · 12-19-2004, 10:45 PM

Volt guage?
You talking an aftermarket voltage guage...or the stock amperage guage?

67ChevyC10Stepside · 12-19-2004, 11:04 PM

stock 67-72 guage.

Longhorn Man · 12-19-2004, 11:06 PM

look on both sides of the engine compartment in the wire harnesses. You're looking for small black rubber inline fuses on both sides.
You probably have one or two blown fuses.

67ChevyC10Stepside · 12-19-2004, 11:08 PM

my wire harness runs on top of the rad support....then through the drivers fender to the firewall....which part of it will they be in? doesn't the brown wire from the alternator go directly to the guage?

Robert1970C20rstbukt · 12-19-2004, 11:49 PM

That's weird, I'm having trouble with mine too. I'm getting power through the fused wire to the gauge so I guess mine's bad. My Granddad installed an aftermarket gauge under the dash so it's cool for now. Is there any way to use an ohm meter or something to check it?

Brainchild · 12-20-2004, 01:24 AM

lol I never had one that worked,figured when the battery was dead,something was broken.Maybe i should check into the fuses as well.

Huck · 12-20-2004, 10:06 AM

The fuses Andy is referring to are on the front corners of the wiring harness---where the fender and radiator support meet. Little bitty things but inline. Usually break just trying to inspect them. Most common cause for gauge failure.

67ChevyC10Stepside · 12-20-2004, 12:50 PM

ty

Dick Dale · 12-20-2004, 03:40 PM

I never rely much on the facto0ry gauges, I might put in aftermarket one day but until then, if it don/'t start, somethings wrong

**john** · 12-20-2004, 05:20 PM

diagram

12-19-2004, 09:15 PM	#1
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	my guage doesnt work. how do i tell if my volt guage is bad? it does nothing as of right now. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-19-2004, 10:17 PM	#2
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	ttt __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-19-2004, 11:04 PM	#4
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	stock 67-72 guage. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-19-2004, 11:08 PM	#6
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	my wire harness runs on top of the rad support....then through the drivers fender to the firewall....which part of it will they be in? doesn't the brown wire from the alternator go directly to the guage? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-19-2004, 11:49 PM	#7
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	That's weird, I'm having trouble with mine too. I'm getting power through the fused wire to the gauge so I guess mine's bad. My Granddad installed an aftermarket gauge under the dash so it's cool for now. Is there any way to use an ohm meter or something to check it? __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

12-19-2004, 10:45 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Volt guage? You talking an aftermarket voltage guage...or the stock amperage guage?

12-19-2004, 11:06 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	look on both sides of the engine compartment in the wire harnesses. You're looking for small black rubber inline fuses on both sides. You probably have one or two blown fuses.

12-20-2004, 01:24 AM	#8
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	lol I never had one that worked,figured when the battery was dead,something was broken.Maybe i should check into the fuses as well. __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

12-20-2004, 10:06 AM	#9
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	The fuses Andy is referring to are on the front corners of the wiring harness---where the fender and radiator support meet. Little bitty things but inline. Usually break just trying to inspect them. Most common cause for gauge failure.

12-20-2004, 12:50 PM	#10
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	ty __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-20-2004, 03:40 PM	#11
Dick Dale Excelsior, You Fathead. Join Date: Jun 2004 Location: Valparaiso, In Posts: 937	I never rely much on the facto0ry gauges, I might put in aftermarket one day but until then, if it don/'t start, somethings wrong __________________ Go Navy. The Sea Is Ours. Budget 350 Build http://67-72chevytrucks.com/vboard/s...38#post2264638

12-20-2004, 05:20 PM	#12
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	diagram Attached Images __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.