![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Dec 2004
Posts: 6
|
need auto / transfer for 70 k-10
looking for parts to change 4-speed 70 k10 to auto ( 350 )
|
![]() |
![]() |
![]() |
#2 |
"Ochre Ogre"
Join Date: Apr 2000
Location: Springfield, MN
Posts: 3,558
|
location is very important on the big and heavy things like this, where you at? I have the stuff you are looking for but unless you are close shipping is a killer.
__________________
Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
if you are interested, i may need some of the parts you are taking off. let me know if you want to sell anything. thanks
Ryan |
![]() |
![]() |
![]() |
#4 | |
Registered User
Join Date: Dec 2004
Posts: 6
|
Quote:
|
|
![]() |
![]() |
![]() |
#5 | |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,477
|
![]() Quote:
![]()
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
|
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: Dec 2004
Posts: 6
|
Quote:
piney flats about 10 to 15 minutes on 11e southwest of bristol speedway or in other words in the hills |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Feb 2002
Location: Cadiz, OH
Posts: 628
|
Never thought about getting rid of the parts but I have most everything you would need, auto trans still connected to the t-case, cross member, mount for the t case and I think I still have the auto linkages. The drive shaft I have would be for a Blazer. Flywheel is still on the 307 that was hooked to it. I live in Northern Panhandle of WV.
__________________
68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible. |
![]() |
![]() |
![]() |
#8 | |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
Quote:
You already have the cross member and driveshafts you need for this swap... They are currently installed in your truck! You need the th350, adapter, and t-case. You also need an auto steering column and the shifter linkage from the column to the tranny. Try to get the transfer case shifter with the used parts. I did not and then I had to get a new shifter bolt from the dealer. They were different on the two NP205s I had. However the shifter was the same. Closely inspect any adapter you buy used for cracks. I've never seen a used one that wasn't cracked. I would also change the grease seals in the adapter and purchase and install a new drive sleeve while you have it apart. The sleeve and seals are what keep tranny fluid in the tranny and gear oil in the transfer case.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Dec 2004
Posts: 6
|
thanks mrein3
sorry to be awhile getting back. mother-in law in hospital. i believe i solved my problem i bought a complete truck.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|