Recommend me a new clutch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MandarinSixSeven · 12-23-2004, 05:39 PM

Man, It's been a while. I have been trying to stay away from the board, it makes me crave the truck too much, now that it is in storage. But, I must ask this: My truck needs a new clutch (has a saginaw 4-speed). What is a good one to get? I want something a little better than stock with a little more grabbing power to it...any recommendations?

Harold Shepard · 12-23-2004, 07:05 PM

Centerforce is a very good clutch- it holds up very well.

gmc67swb · 12-23-2004, 11:00 PM

I have a Centerforce Dualfriction. So far, I like it. I used to get a little chatter with the old clutch when I would back up. Now with the new flywheel, clutch and pressure plate, it's smooth and grabs good. It's also daily driven.

crazy longhorn · 12-24-2004, 12:52 PM

"Ditto" on the Centerforce ! My longhorn runs a dual friction setup ......i like the lite "feel" of a diapragm plate, but still have the clamp, with the weights on the fingers. My clutch has been abused pretty good, & hasnt given a bit on trouble.....

MandarinSixSeven · 12-24-2004, 02:49 PM

Awesome. Thanks guys, Sounds like centerforce all the way. I will definately be looking into the dualfriction.

12-23-2004, 05:39 PM	#1
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	Recommend me a new clutch Man, It's been a while. I have been trying to stay away from the board, it makes me crave the truck too much, now that it is in storage. But, I must ask this: My truck needs a new clutch (has a saginaw 4-speed). What is a good one to get? I want something a little better than stock with a little more grabbing power to it...any recommendations? __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

12-23-2004, 11:00 PM	#3
gmc67swb Registered User Join Date: Feb 2003 Location: Mesquite, Tx Posts: 396	I have a Centerforce Dualfriction. So far, I like it. I used to get a little chatter with the old clutch when I would back up. Now with the new flywheel, clutch and pressure plate, it's smooth and grabs good. It's also daily driven. __________________ GM 330HP/350, Magnuson 122HH, Tremec TKO 5spd

12-24-2004, 12:52 PM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	"Ditto" on the Centerforce ! My longhorn runs a dual friction setup ......i like the lite "feel" of a diapragm plate, but still have the clamp, with the weights on the fingers. My clutch has been abused pretty good, & hasnt given a bit on trouble..... __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

12-24-2004, 02:49 PM	#5
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	Awesome. Thanks guys, Sounds like centerforce all the way. I will definately be looking into the dualfriction. __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

12-23-2004, 07:05 PM	#2
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	Centerforce is a very good clutch- it holds up very well.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.