Looking for pics/schematic of brake pedal assy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

XXL · 12-24-2004, 06:04 PM

If you've got any pics or exploded diagram (or even if you can describe the assembly) for the brake pedal, I'd appreciate it. I've got the steel pedal but nothing else in my hand... I know there are some plastic bushings, but what holds it in the bracket? Is there a pin that goes all the way through? Or??

SCOTI · 12-24-2004, 11:03 PM

Kenneth, I have a pedal assembly somewhere around my stash. It's a clutch set-up but should give you an idea. If someone doesn't beat me to it, I can put up some picks tomorrow evening & see if that helps you. Scot

piecesparts · 12-25-2004, 01:27 AM

There is a pin that goes all of the way through and the pin has a tab that has a hole in it for a bolt to hold it to the mounting bracket. A manual transmission brake pedal and the automatic brake pedal are the same, the clutch pedal is just mounted into the bracket on the same pin.

12-24-2004, 06:04 PM	#1
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Looking for pics/schematic of brake pedal assy If you've got any pics or exploded diagram (or even if you can describe the assembly) for the brake pedal, I'd appreciate it. I've got the steel pedal but nothing else in my hand... I know there are some plastic bushings, but what holds it in the bracket? Is there a pin that goes all the way through? Or?? __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

12-24-2004, 11:03 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,941	Kenneth, I have a pedal assembly somewhere around my stash. It's a clutch set-up but should give you an idea. If someone doesn't beat me to it, I can put up some picks tomorrow evening & see if that helps you. Scot __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-25-2004, 01:27 AM	#3
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	There is a pin that goes all of the way through and the pin has a tab that has a hole in it for a bolt to hold it to the mounting bracket. A manual transmission brake pedal and the automatic brake pedal are the same, the clutch pedal is just mounted into the bracket on the same pin.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.