anyone need any of this? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyC10Stepside · 12-21-2004, 12:37 PM

the harness is for manual guages no a/c i can check it over tonight if you want. i never drove the truck...the only thing i can tell you is all the guage lights and interior light worked. no fleetside harness sorry

67stepside · 12-21-2004, 11:24 PM

Do you have any good headlight bezels 67-68?

67ChevyC10Stepside · 12-21-2004, 11:40 PM

no sorry

Blue_71 · 12-22-2004, 12:42 PM

just checking in to see how it turned out to be

chadfowler · 12-22-2004, 02:00 PM

do you have a vent that goes in the middle of the dash above the radio

elmo13 · 12-22-2004, 06:51 PM

How much for the harness? Are there any cuts or connectors on the wires? Is the harness for a complete stepside truck? Thanks in advance for the info.

67ChevyC10Stepside · 12-22-2004, 07:44 PM

hmm....what does the vent look like? is it just one of the square ones? you just need the plastic? i'd have to check out the harness and see.

67ChevyC10Stepside · 12-24-2004, 08:38 PM

im planning on getting the shipping quote monday. my grandparents are in for christmas and i've been real busy. sorry for any inconvenience.

the bezel is sold and gone BTW

69ChevyLB · 12-24-2004, 09:40 PM

How much for the underhood harness? I am also interested in the firewall dash and one of the seats. Could I see some pictures?

67ChevyC10Stepside · 12-25-2004, 12:44 PM

i'll have to check out that harnesses....give me a little time. everyone is in for christmas and everything so im real busy. the firewall and dash you can have for like 10 15 bucks or whatever i just want it gone. and dont have a torch or anything to cut the center section out.

*dtlilly* · 12-25-2004, 03:09 PM

I want to buy the green seat, but just the upholstry. If you can get the D-clips cut off without damaging the cover, let me know how much. Thanks, Don.

kaycee · 12-25-2004, 05:17 PM

Do u have a rear step wire harness?For the tailight and backup lights??

69ChevyLB · 12-26-2004, 03:45 PM

You have a PM. I posted on 12/24 about the underhood harness, firewall/dash and a seat and didn't get a reply.
Thanks

67ChevyC10Stepside · 12-26-2004, 05:18 PM

i'll have to check out that harnesses....give me a little time. everyone is in for christmas and everything so im real busy. the firewall and dash you can have for like 10 15 bucks or whatever i just want it gone. and dont have a torch or anything to cut the center section out. right there is replied to you.....and here is the rip in the seat....

*dtlilly* · 12-27-2004, 01:12 AM

no problem on the seat rip. When the holiday rush is over is fine, I'll try to repair the vinyl with a kit? Thanks, Don

67ChevyC10Stepside · 12-28-2004, 11:41 PM

alright guys.....sorry for the delays...havent been in my house since sunday morning. here are pics of the harnesses. the underdash one looks great. the underhood one is a rats nest.

67ChevyC10Stepside · 12-28-2004, 11:42 PM

underhood

67ChevyC10Stepside · 12-29-2004, 09:23 PM

do you guys still want the emblems? how about the harness? i got the unilite taken care of and the bezel/door handles...and i PMed you about the guages tonight.... i got a digital camera for christmas so i can take better pics.

avejoe · 12-29-2004, 09:51 PM

PM sent

12-21-2004, 12:37 PM	#26
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	the harness is for manual guages no a/c i can check it over tonight if you want. i never drove the truck...the only thing i can tell you is all the guage lights and interior light worked. no fleetside harness sorry __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-21-2004, 11:40 PM	#28
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	no sorry __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-22-2004, 07:44 PM	#32
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	hmm....what does the vent look like? is it just one of the square ones? you just need the plastic? i'd have to check out the harness and see. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-24-2004, 08:38 PM	#33
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	im planning on getting the shipping quote monday. my grandparents are in for christmas and i've been real busy. sorry for any inconvenience. the bezel is sold and gone BTW __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-24-2004, 09:40 PM	#34
69ChevyLB Active Member Join Date: Aug 2004 Location: Canton, OH Posts: 249	How much for the underhood harness? I am also interested in the firewall dash and one of the seats. Could I see some pictures? __________________ 69 C10 LWB Project 47 Cushman Scooter Project It is better to have loved and lost than to live with a psycho all your life.

12-21-2004, 11:24 PM	#27
67stepside Registered User Join Date: Jan 2002 Location: Columbus, IN. USA Posts: 140	Do you have any good headlight bezels 67-68?

12-22-2004, 02:00 PM	#30
chadfowler Registered User Join Date: Jul 2004 Location: tn Posts: 149	do you have a vent that goes in the middle of the dash above the radio

12-22-2004, 06:51 PM	#31
elmo13 Registered User Join Date: Dec 2001 Location: phoenix az Posts: 22	How much for the harness? Are there any cuts or connectors on the wires? Is the harness for a complete stepside truck? Thanks in advance for the info.

12-25-2004, 12:44 PM	#35
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	i'll have to check out that harnesses....give me a little time. everyone is in for christmas and everything so im real busy. the firewall and dash you can have for like 10 15 bucks or whatever i just want it gone. and dont have a torch or anything to cut the center section out. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-25-2004, 03:09 PM	#36
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	I want to buy the green seat, but just the upholstry. If you can get the D-clips cut off without damaging the cover, let me know how much. Thanks, Don.

12-25-2004, 05:17 PM	#37
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,445	Do u have a rear step wire harness?For the tailight and backup lights?? __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

12-26-2004, 03:45 PM	#38
69ChevyLB Active Member Join Date: Aug 2004 Location: Canton, OH Posts: 249	You have a PM. I posted on 12/24 about the underhood harness, firewall/dash and a seat and didn't get a reply. Thanks __________________ 69 C10 LWB Project 47 Cushman Scooter Project It is better to have loved and lost than to live with a psycho all your life.

12-26-2004, 05:18 PM	#39
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	i'll have to check out that harnesses....give me a little time. everyone is in for christmas and everything so im real busy. the firewall and dash you can have for like 10 15 bucks or whatever i just want it gone. and dont have a torch or anything to cut the center section out. right there is replied to you.....and here is the rip in the seat.... Attached Images __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-27-2004, 01:12 AM	#40
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	no problem on the seat rip. When the holiday rush is over is fine, I'll try to repair the vinyl with a kit? Thanks, Don

12-28-2004, 11:41 PM	#41
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	alright guys.....sorry for the delays...havent been in my house since sunday morning. here are pics of the harnesses. the underdash one looks great. the underhood one is a rats nest. Attached Images __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.



Register or Log In To remove these advertisements.

12-28-2004, 11:42 PM	#42
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	underhood Attached Images __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-29-2004, 09:23 PM	#43
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	do you guys still want the emblems? how about the harness? i got the unilite taken care of and the bezel/door handles...and i PMed you about the guages tonight.... i got a digital camera for christmas so i can take better pics. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-29-2004, 09:51 PM	#44
avejoe Custer had a plan too. Join Date: Dec 2003 Location: No. California Posts: 344	PM sent __________________ 72 K15 GMC (aka Big White) Performance Rockers, Cab Corners, and Floors Fossil Fuel Glutton Neighborhood Nuisance 98 BMW 540i for Speed (Sold ) 05 Subaru Outback for mileage

Register or Log In To remove these advertisements.