garage sale time! lots of new stuff added!

[emeribd]

"Chevy 305 came out of my 86 C10. 114,000 mi. new Summit 1102 cam/lifters. new gaskets throughout. 200.00"

New member looking at posts. Have you sold this already? If not, did she run ok? Use oil or anything? Why did you pull it?

Thanks

[1FaastC10]

Originally Posted by emeribd

"Chevy 305 came out of my 86 C10. 114,000 mi. new Summit 1102 cam/lifters. new gaskets throughout. 200.00"

New member looking at posts. Have you sold this already? If not, did she run ok? Use oil or anything? Why did you pull it?

nope, i've still got it. my intentrions for the truck were to put it together (bought it with a bad trans from the original owner) and drive the wheels off of it. it was a little leaky, so i pulled it to regasket it. in the process i found a worn timing chain and some wear patterns on the cam that i didnt like. nothing flat, just odd wear marks. i put the new cam and lifters in it, along with a new double roller timing chain. after the truck decided to eat its third 700R4, i decided enough was enough, i was going to do something different. so it became a body donor for my trail truck project. im not using the engine because i have a 5.7 Vortec that i was planning on using, and i recently came across a 6.2 diesel, im going with that instead. best carbed engine i've ever had, 1 pump and it would fire up every time. no burning oil that i noticed, although i probably only put 1000 mi or less on the truck since i bought it in April '03

[gldevall]

Hey, Jeremy if you are using the diesel engine now, do you want to sell the Vortec? If so, how much?

[1FaastC10]

it needs a crank kit and 2 rods, and is completely disassembled right now. i have everything from the valvecovers down, with the exception of the oil pan. i scored another crank and a set of rods today, but they will need to be checked out. i'm thinking of putting it together for my next project... my evil brain is at work again...

[patgizz]

i just wanted to chime in and say what a pleasure it was to deal with you and thanks for the shocks. if you still have some 15x8 rallys (5x5) in a few weeks i might take some off your hands, cause i need new tires and i have 3 bent rims right now.

[1FaastC10]

cool pat, let me know. maybe we can arrange a meet somewhere between here and there, might actually be cheaper than shipping.

[emeribd]

"Chevy 305 came out of my 86 C10. 114,000 mi. new Summit 1102 cam/lifters. new gaskets throughout. 200.00"

my dad is very interested in this. he has an '84 c10 305 w/ some serious problems. he was wanting me to ask if this is a complete motor & if you have any pics you could post.

thanks

[1FaastC10]

it is complete, carb to pan, minus the distributor and the accessories (ps pump, ac pump, alternator and associated brackets). i dont have any pics of it right now but i'll see if i can pull it out and get some later tonight.

[audra]

tell me what you have left

[1FaastC10]

post updated, TTT

[us111]

(1fasst),,if bench seat is still available please contact me at zane40@hotmail.com name's DOUG,,,,,,,thank you

[bigarmzz]

post some pics of the motor?....


thanks

-bigarmzz-

[1FaastC10]

bigarmzz, i dont have any pics of it, my uncle has the camera. to be honest, its nothing to look at. just stock tin over a small block, no extra piant work, nothin fancy at all.

[1FaastC10]

TTT for those of you who inquired

[1FaastC10]

TTT i need space!!!

[rich-white]

Jeremy Please keep an eye out for a set of inner fenders for an 80 rust free. Thanks

[1FaastC10]

will do.