More free stuff sorta - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hambone1958 · 12-14-2004, 09:15 AM

I have new in box complete kit to convert a long bed metal floor to wood all the metal parts new from Mar-k no wood. No shipping just pick it up and make a donation to Josh to help maintain the board. The kit cost me $420.00. As far as the donation amount whatever you feel in your heart. I was going to go with a wood bed but found a bed in mint condition and just can't bear to cut it up. The metal floor doesn't even have a scratch in the original faded yellow paint.

I also have 2 wheel arch patch panels if anyone wants them.

chevman-67 · 12-14-2004, 09:44 AM

wow what a deal im sure somone will come through for the board.

hambone1958 · 12-15-2004, 03:33 PM

ttt

Bamm · 12-15-2004, 05:56 PM

pm sent for info, thanks..........Jerry

c-1072 · 12-15-2004, 10:39 PM

i wouldnt mind gettin that stuff but i cant pick up i was going to buy a bed from someone just for the wood bed crossmembers .

shipping must be out of the question .

padreisla · 12-15-2004, 11:09 PM

Sent PM about kit!

MOTHERTRUCKERS · 12-16-2004, 08:56 AM

What is included in the kit?

hambone1958 · 12-16-2004, 12:33 PM

This should answer all questions.

Bed Kit-Metal Parts
Wood Bed Conversion Kit
This kit includes the structural parts needed to convert your fleetside bed to a wood floor using your original bed sides, tailgate, and wheel tubs. These steel parts are formed to match the original components. Hardware is included to bolt the front panel and rear sill to your original bed sides. The kit also comes with detailed instructions for the conversion. Wood bed floor kit is not included and may be ordered separately. For details about each part in this kit click on the part listed below.

Part Number: 100046 Price: $452.00 KIT

This kit includes the following parts: Part Quantity Price Total
100620 - Front Bed Panels - Original(EACH) 1 $150.00 $150.00
100617 - Front Bed Panel Hardware - Steel(KIT) 1 $5.00 $5.00
110438 - Reinforcement Strips - 72 inches(EACH) 1 $30.00 $30.00
110494 - Cross Sills - Original(EACH) 5 $30.00 $150.00
100722 - Rear Cross Sills - Original(EACH) 1 $112.00 $112.00
100580 - Rear Cross Sill Hardware - Zinc Plated Steel(KIT) 1 $5.00 $5.00
Total: $452.00

After adding this kit to your order, select REVIEW YOUR ORDER from the window to remove individual parts from your kit. Then you may substitute parts or order additional parts from the "Parts Available" list on the left hand frame.

I also opted for the stainless steel bolt upgrade. As far as a pickup time it's not in my way so whenever is fine. As for shipping it is pretty heavy and i'm sure the shipping would be costly. As for price there is no price all i ask is for you to make a very nice donation to Josh to help support the board.

Bamm · 12-16-2004, 12:55 PM

another pm sent hambone. Thanks, ......Jerry

chipflyer · 12-16-2004, 02:28 PM

pm sent.

hambone1958 · 12-23-2004, 09:21 AM

ttt

quicksilver · 12-30-2004, 09:47 PM

You got PM...

12-14-2004, 09:15 AM	#1
hambone1958 Registered User Join Date: Feb 2003 Location: Point Harbor NC Posts: 299	More free stuff sorta I have new in box complete kit to convert a long bed metal floor to wood all the metal parts new from Mar-k no wood. No shipping just pick it up and make a donation to Josh to help maintain the board. The kit cost me $420.00. As far as the donation amount whatever you feel in your heart. I was going to go with a wood bed but found a bed in mint condition and just can't bear to cut it up. The metal floor doesn't even have a scratch in the original faded yellow paint. I also have 2 wheel arch patch panels if anyone wants them. __________________ Alan

12-14-2004, 09:44 AM	#2
chevman-67 Registered User Join Date: Jul 2004 Location: quebec canada Posts: 135	wow what a deal im sure somone will come through for the board. __________________ gm's are #1 1967 chevrolet short step 1988 chev 4x4 1/2 ton 1989 gmc 1/2 ton 1991 chev 1/2 ton 4x4 1993 Jeep grand cherokee 4x4 And yes a 94 Ford Mustang.

12-15-2004, 03:33 PM	#3
hambone1958 Registered User Join Date: Feb 2003 Location: Point Harbor NC Posts: 299	ttt __________________ Alan

12-15-2004, 05:56 PM	#4
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	pm sent for info, thanks..........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

12-15-2004, 10:39 PM	#5
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	parts i wouldnt mind gettin that stuff but i cant pick up i was going to buy a bed from someone just for the wood bed crossmembers . shipping must be out of the question .

12-15-2004, 11:09 PM	#6
padreisla Registered User Join Date: Jan 2003 Location: Tampa, Florida Posts: 141	Send PM Sent PM about kit! __________________ 67 C20 LWB 454 BB THD 400 97 Jeep Wrangler 4cyl 5sp

12-16-2004, 08:56 AM	#7
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	What is included in the kit? __________________ Rest in Peace Ed. Thanks for all the good times.

12-16-2004, 12:33 PM	#8
hambone1958 Registered User Join Date: Feb 2003 Location: Point Harbor NC Posts: 299	This should answer all questions. Bed Kit-Metal Parts Wood Bed Conversion Kit This kit includes the structural parts needed to convert your fleetside bed to a wood floor using your original bed sides, tailgate, and wheel tubs. These steel parts are formed to match the original components. Hardware is included to bolt the front panel and rear sill to your original bed sides. The kit also comes with detailed instructions for the conversion. Wood bed floor kit is not included and may be ordered separately. For details about each part in this kit click on the part listed below. Part Number: 100046 Price: $452.00 KIT This kit includes the following parts: Part Quantity Price Total 100620 - Front Bed Panels - Original(EACH) 1 $150.00 $150.00 100617 - Front Bed Panel Hardware - Steel(KIT) 1 $5.00 $5.00 110438 - Reinforcement Strips - 72 inches(EACH) 1 $30.00 $30.00 110494 - Cross Sills - Original(EACH) 5 $30.00 $150.00 100722 - Rear Cross Sills - Original(EACH) 1 $112.00 $112.00 100580 - Rear Cross Sill Hardware - Zinc Plated Steel(KIT) 1 $5.00 $5.00 Total: $452.00 After adding this kit to your order, select REVIEW YOUR ORDER from the window to remove individual parts from your kit. Then you may substitute parts or order additional parts from the "Parts Available" list on the left hand frame. I also opted for the stainless steel bolt upgrade. As far as a pickup time it's not in my way so whenever is fine. As for shipping it is pretty heavy and i'm sure the shipping would be costly. As for price there is no price all i ask is for you to make a very nice donation to Josh to help support the board. __________________ Alan Last edited by hambone1958; 12-16-2004 at 12:40 PM.

12-16-2004, 12:55 PM	#9
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	another pm sent hambone. Thanks, ......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

12-16-2004, 02:28 PM	#10
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	pm sent. __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-23-2004, 09:21 AM	#11
hambone1958 Registered User Join Date: Feb 2003 Location: Point Harbor NC Posts: 299	ttt __________________ Alan

12-30-2004, 09:47 PM	#12
quicksilver Registered User Join Date: Dec 2004 Location: Waldorf, MD Posts: 24	You got PM... __________________ Doug Simmons 1972 LWB Cheyenne- blue w/ white top 1998 Z28 Camaro (quicksilver)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.