Another Tilt Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teamharvey · 01-03-2005, 10:38 PM

Here is a link to my thread showing what my original set-up looked like. Is there room to move the column in more ?
http://www.67-72chevytrucks.com/vboa...highlight=tilt
With my new set-up the wheel+adaptor will stick out about 4 inches more. Can you tell if my inter-shaft has already been collapsed ? If not, this would give the the extra room I desire. Here is a pic of the shaft as it sits now.

72dually · 01-03-2005, 10:52 PM

I'd go a little further, I have mine set at 2" from the collapse point to the upper, but I like my steering column a little closer to the dash for comfort, you might wanna go 3"
Wow I just notice my boot needs some help, adjustment necessary

Solver · 01-03-2005, 11:08 PM

here is a pic of my intermediate joint once installed

teamharvey · 01-03-2005, 11:20 PM

Will the NSS clearance be an issue if I shorten the shaft ? I used the 5 1/2 in. measurement from the slot when I relocated it.

Bret

Solver · 01-04-2005, 12:02 AM

If your intermediate shaft wil expand and collapse by hand the all you have to do is mount the whole works in the truck but don't tighten anything down. Once installed you can push and pull on the steering wheel till you get it to feel right as far as distance from you. Thats why I like the intermediate to be able to slide fairly easily

teamharvey · 01-04-2005, 12:12 AM

Thanks guys !

01-03-2005, 10:38 PM	#1
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	Another Tilt Question Here is a link to my thread showing what my original set-up looked like. Is there room to move the column in more ? http://www.67-72chevytrucks.com/vboa...highlight=tilt With my new set-up the wheel+adaptor will stick out about 4 inches more. Can you tell if my inter-shaft has already been collapsed ? If not, this would give the the extra room I desire. Here is a pic of the shaft as it sits now. Attached Images __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

01-03-2005, 10:52 PM	#2
72dually Senior Member Join Date: Apr 2004 Location: Northern Arizona Posts: 687	I'd go a little further, I have mine set at 2" from the collapse point to the upper, but I like my steering column a little closer to the dash for comfort, you might wanna go 3" Wow I just notice my boot needs some help, adjustment necessary Attached Images Last edited by 72dually; 01-03-2005 at 11:22 PM.

01-03-2005, 11:08 PM	#3
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	here is a pic of my intermediate joint once installed Attached Images __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

01-03-2005, 11:20 PM	#4
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	Will the NSS clearance be an issue if I shorten the shaft ? I used the 5 1/2 in. measurement from the slot when I relocated it. Bret __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

01-04-2005, 12:02 AM	#5
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	If your intermediate shaft wil expand and collapse by hand the all you have to do is mount the whole works in the truck but don't tighten anything down. Once installed you can push and pull on the steering wheel till you get it to feel right as far as distance from you. Thats why I like the intermediate to be able to slide fairly easily __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

01-04-2005, 12:12 AM	#6
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	Thanks guys ! __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.