New stuff...Check these out! :) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SweetandLong68 · 01-02-2005, 02:25 AM

Hey guys,

I was just checking out some new products that Proform is doing right now and I have found something that you guys might like.

I think these new light weight fabricated valve covers look so sweet...

What do you guys think??

lata
CHRIS

chevjayfsd · 01-02-2005, 02:27 AM

Looks nice and clean! But that always comes with a price!!! How much are they??

Jason

SweetandLong68 · 01-02-2005, 02:28 AM

Hey,

Haven't seen a price for them yet. But like you said they are probably higher then heck. But man I love that look. I might have to bit the bullet and get them anyways....

lata
CHRIS

chevjayfsd · 01-02-2005, 02:32 AM

Might as well... Can't take your money to the grave!!

Jason

SweetandLong68 · 01-02-2005, 02:35 AM

Quote:

Originally Posted by chevjayfsd

Might as well... Can't take your money to the grave!!

Jason

Gonna take my truck though!

BobbyK · 01-02-2005, 02:58 AM

I agree,VERY clean install.
Looks great!

68w/sbc406 · 01-02-2005, 04:14 AM

Quote:

Originally Posted by chevjayfsd

Might as well... Can't take your money to the grave!!

Jason

i like your thinking, spend as much as you can while you are alive, and let you family take care of you debt when your gone

muddpile · 01-02-2005, 03:06 PM

Those look great!

http://www.jegs.com/cgi-bin/ncommerc...25&prmenbr=361

A little out of my price range though. I was thinking more along the lines of this kit for mine. I really like it.

http://www.jegs.com/cgi-bin/ncommerc...68&prmenbr=361

LUV2XCLR8 · 01-02-2005, 03:17 PM

NICE

SweetandLong68 · 01-02-2005, 11:14 PM

The only thing with the stamped type steel valve covers is they leak like a screen door on a submarine

haha

I have always been a fan of the nice Die Cast valve covers as they seem not to leak as much

lata
CHRIS

muddpile · 01-03-2005, 12:43 AM

ahhhh. stamped steel. Missed that one in the description. I'm not a fan of that either. Corvette has cast magnesium, and ever since my new gaskets I haven't had a problem.

bigjimzlll · 01-03-2005, 02:56 AM

they are not stamped steel..they are fab aluminum. I absolutley hate proform junk...but those sure look sweet

SweetandLong68 · 01-03-2005, 04:32 AM

Hey,

What makes you say that Proform is Junk? I know some of the stuff that they make is a bit cheezy...But there again some of the stuff like these valve covers or the Race series Holley Double Pump carbs are super nice IMO.

I am just curious of your opinion.

Oh and on those 'other' valve covers....I bet they still leak like a screen door on a submarine

lata
CHRIS

SweetandLong68 · 01-03-2005, 04:35 AM

This is going on my new SBC roller motor...Badd Ace

lata
CHRIS

bigjimzlll · 01-03-2005, 01:47 PM

All of there parts are made in China..Not USA. I have used there distributor and stamped roller rockers in the past....lets just say..you get what you pay for. They do a pretty decent job of knocking off american no how. Why would you buy an overseas knock off holley..when for just a couple of bucks more, you can get the real thing? Demon carbs atleast used different molds for there carbs...

SweetandLong68 · 01-04-2005, 07:42 PM

Hey,

I can understand what you are saying and the Chinese stuff. But in my case I would never use any of there stuff inside any of my motors....No matter how good anyone says it is.

I wouldn't have a problem on using the valve covers. It doesn't keep my motor running...

And about the carb. You have made some good points and I am considering doing some more research on them before I plunk down some good money for them. The reason that I was checking into them was because of the HP gains that I have heard from from using their main bodies.

lata
CHRIS

Quote:

Originally Posted by bigjimzlll

All of there parts are made in China..Not USA. I have used there distributor and stamped roller rockers in the past....lets just say..you get what you pay for. They do a pretty decent job of knocking off american no how. Why would you buy an overseas knock off holley..when for just a couple of bucks more, you can get the real thing? Demon carbs atleast used different molds for there carbs...

**BIG ORANGE** · 01-04-2005, 09:24 PM

Hey Chris how are ya doing up there in TN. and hows that 68 you bought from me. He you owe me abox of doughnutts.lol Where are you working now Krispy Kream?
What ever happened to Bobby and Lisa did they rob a bank with all them guns they have.lol I havent never heard anything else from them.
Oyeah nice valve covers I'll take aset for my truck!

SweetandLong68 · 01-04-2005, 11:29 PM

Quote:

Originally Posted by BIG ORANGE

Hey Chris how are ya doing up there in TN. and hows that 68 you bought from me. He you owe me abox of doughnutts.lol Where are you working now Krispy Kream?
What ever happened to Bobby and Lisa did they rob a bank with all them guns they have.lol I havent never heard anything else from them.
Oyeah nice valve covers I'll take aset for my truck!

Hey Big O.

Yeah I am doing well. Living out in the country in TN. Alot less stress than living in Charlotte.

My brother bought that 68 from me. At least he told me he wanted it. I bought a bit newer truck with some good options. 350/T350 PS, Pwr disc brakes and A/C.

I am not working at KK anymore...No I am working for a company called BASF.

Bobby and Lisa are still kicking....Just doing their thing I guess. Bobby got a 70 Camaro and a 97 Tahoe as of late. Both are very nice.

lata
CHRIS

01-02-2005, 02:25 AM	#1
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	New stuff...Check these out! :) Hey guys, I was just checking out some new products that Proform is doing right now and I have found something that you guys might like. I think these new light weight fabricated valve covers look so sweet... What do you guys think?? lata CHRIS Attached Images __________________ 68 C10 shortbed -- Street/Strip

01-02-2005, 02:27 AM	#2
chevjayfsd Project 7dos Join Date: Aug 2001 Location: Abilene, Texas Posts: 876	Looks nice and clean! But that always comes with a price!!! How much are they?? Jason __________________ 7DOS - 1972 C-10 350/350 Porterbuilt/Accuair 20x8.5/20x10 Ride Low or Die PSSST - Yes it's bagged. 7dos build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=610290

01-02-2005, 02:28 AM	#3
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	Hey, Haven't seen a price for them yet. But like you said they are probably higher then heck. But man I love that look. I might have to bit the bullet and get them anyways.... lata CHRIS __________________ 68 C10 shortbed -- Street/Strip

01-02-2005, 02:32 AM	#4
chevjayfsd Project 7dos Join Date: Aug 2001 Location: Abilene, Texas Posts: 876	Might as well... Can't take your money to the grave!! Jason __________________ 7DOS - 1972 C-10 350/350 Porterbuilt/Accuair 20x8.5/20x10 Ride Low or Die PSSST - Yes it's bagged. 7dos build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=610290

01-02-2005, 02:58 AM	#6
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,771	I agree,VERY clean install. Looks great! __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

01-02-2005, 03:06 PM	#8
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Those look great! http://www.jegs.com/cgi-bin/ncommerc...25&prmenbr=361 A little out of my price range though. I was thinking more along the lines of this kit for mine. I really like it. http://www.jegs.com/cgi-bin/ncommerc...68&prmenbr=361 __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

01-02-2005, 03:17 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	NICE __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-02-2005, 11:14 PM	#10
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	The only thing with the stamped type steel valve covers is they leak like a screen door on a submarine haha I have always been a fan of the nice Die Cast valve covers as they seem not to leak as much lata CHRIS __________________ 68 C10 shortbed -- Street/Strip

01-03-2005, 12:43 AM	#11
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	ahhhh. stamped steel. Missed that one in the description. I'm not a fan of that either. Corvette has cast magnesium, and ever since my new gaskets I haven't had a problem. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

01-03-2005, 02:56 AM	#12
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	they are not stamped steel..they are fab aluminum. I absolutley hate proform junk...but those sure look sweet __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

01-03-2005, 04:32 AM	#13
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	Hey, What makes you say that Proform is Junk? I know some of the stuff that they make is a bit cheezy...But there again some of the stuff like these valve covers or the Race series Holley Double Pump carbs are super nice IMO. I am just curious of your opinion. Oh and on those 'other' valve covers....I bet they still leak like a screen door on a submarine lata CHRIS __________________ 68 C10 shortbed -- Street/Strip

01-03-2005, 04:35 AM	#14
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	This is going on my new SBC roller motor...Badd Ace lata CHRIS Attached Images __________________ 68 C10 shortbed -- Street/Strip

01-03-2005, 01:47 PM	#15
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	All of there parts are made in China..Not USA. I have used there distributor and stamped roller rockers in the past....lets just say..you get what you pay for. They do a pretty decent job of knocking off american no how. Why would you buy an overseas knock off holley..when for just a couple of bucks more, you can get the real thing? Demon carbs atleast used different molds for there carbs... __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

01-04-2005, 09:24 PM	#17
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,752	Hey Chris how are ya doing up there in TN. and hows that 68 you bought from me. He you owe me abox of doughnutts.lol Where are you working now Krispy Kream? What ever happened to Bobby and Lisa did they rob a bank with all them guns they have.lol I havent never heard anything else from them. Oyeah nice valve covers I'll take aset for my truck! __________________ Things happen for a reason!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.