Radio Parts Question ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teamharvey · 01-05-2005, 10:03 PM

Hey,
Are these the correct knobs for this radio ? If so, all are pieces there ? If incorrect, what do I need for this radio ?
The top chrome one has groved edges and has a larger inner hole than the other, does not seem to fit.
Thanks,
Bret

teamharvey · 01-05-2005, 10:22 PM

Here is a pic of Diane`s radio. The chrome bezels look to be the same as mine but my power side one has the larger hole and does not fit tight. Also, what exactly are the groved edges for ?
http://www.67-72chevytrucks.com/vboa...ht=radio+knobs

Thanks,
bret

Rod · 01-05-2005, 11:09 PM

Besides the nuts ..it appears all there..those are the plain radio dial knobs..the deluxe have the stainless insret in the center of the dial.

Putter · 01-06-2005, 11:29 AM

The chrome one with the smaller hole ("D-SHAPED") goes on the left (volume side) and the larger 'round' holed one goes on the right. The left one adjusts "TONE" and the right one just makes it look symetrical (however you spell it...it makes it match the opposite side).

Bob Moore · 01-06-2005, 02:05 PM

The chrome jobs- one should be smooth on the edge for the right side. the other one should have serations on the edge - like a quarter - to adjust the tone on the left side.

I have deluxe radio knobs - w/stainless inserts - if you are interested.

Thanks - Bob

01-05-2005, 10:03 PM	#1
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	Radio Parts Question ? Hey, Are these the correct knobs for this radio ? If so, all are pieces there ? If incorrect, what do I need for this radio ? The top chrome one has groved edges and has a larger inner hole than the other, does not seem to fit. Thanks, Bret Attached Images __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids Last edited by teamharvey; 01-05-2005 at 10:06 PM.

01-05-2005, 10:22 PM	#2
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	Here is a pic of Diane`s radio. The chrome bezels look to be the same as mine but my power side one has the larger hole and does not fit tight. Also, what exactly are the groved edges for ? http://www.67-72chevytrucks.com/vboa...ht=radio+knobs Thanks, bret __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

01-05-2005, 11:09 PM	#3
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Besides the nuts ..it appears all there..those are the plain radio dial knobs..the deluxe have the stainless insret in the center of the dial. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

01-06-2005, 11:29 AM	#4
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	The chrome one with the smaller hole ("D-SHAPED") goes on the left (volume side) and the larger 'round' holed one goes on the right. The left one adjusts "TONE" and the right one just makes it look symetrical (however you spell it...it makes it match the opposite side). __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-06-2005, 02:05 PM	#5
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Radio The chrome jobs- one should be smooth on the edge for the right side. the other one should have serations on the edge - like a quarter - to adjust the tone on the left side. I have deluxe radio knobs - w/stainless inserts - if you are interested. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.