Disk brake dust shields - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MylilBowTie · 01-07-2005, 03:08 PM

Anyone have them besides LMC? From what I seen in the LMC book there are different sizes I would need ones for HD 1.25 rotors. Its something I want to replace when I install new rotors somwhere in the near future.

Slonaker · 01-07-2005, 05:01 PM

Quote:

Originally Posted by MylilBowTie

Anyone have them besides LMC? From what I seen in the LMC book there are different sizes I would need ones for HD 1.25 rotors. Its something I want to replace when I install new rotors somwhere in the near future.

I can't answer your question, but mine cleaned up nicely when I rebuilt my front end. I think they were galvanized. I just hit them with a wire brush in my die grinder.

Slonaker

MylilBowTie · 01-07-2005, 08:16 PM

Mine got bent up a little on the drivers side, and it rusted in the bend that runs along the edge. Its not that bad but it did does have pinholes of rust. If Im thinking right that is the only time you can remove it is when the rotor is remove right? If not I can do it later but I figure if Im already there take care of that while Im at it.

Slonaker · 01-07-2005, 08:48 PM

Yes, the rotor has to be off to remove them.

Slonaker

01-07-2005, 03:08 PM	#1
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Disk brake dust shields Anyone have them besides LMC? From what I seen in the LMC book there are different sizes I would need ones for HD 1.25 rotors. Its something I want to replace when I install new rotors somwhere in the near future. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

01-07-2005, 08:16 PM	#3
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Mine got bent up a little on the drivers side, and it rusted in the bend that runs along the edge. Its not that bad but it did does have pinholes of rust. If Im thinking right that is the only time you can remove it is when the rotor is remove right? If not I can do it later but I figure if Im already there take care of that while Im at it. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

01-07-2005, 08:48 PM	#4
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Yes, the rotor has to be off to remove them. Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.