If any vendors would like to quote a price.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bamm · 01-05-2005, 12:48 PM

I am looking for urethane cab mount bushings and rad support bushings for my '67. Also urethane sway bar bushings. If any vendors want to, please pm me with prices including shipping. Thanks, ......Jerry

GreyHoundSteve · 01-05-2005, 01:20 PM

FYI, you may already know this but i have heard bad things about urethane cab mount bushings. People who have used them all tell me that they were too hard a hide and that went back to rubber can mounts.

beagler · 01-05-2005, 01:35 PM

www.manestruckparts.com has them for 60 with everything but the nuts an bolts.

Bamm · 01-05-2005, 02:30 PM

Can anyone out there who has personally had them installed tell me a little more about which ones are better?

72 CustomCamper · 01-05-2005, 05:00 PM

Hey Jerry, I had polly body and spring bushings in a yota 4runner I had. I couldn't tell much difference in ride. They did firm it up some but it also had a 4" lift in it...

Chuck

**JIMs70GMC** · 01-05-2005, 08:10 PM

I've got prothane body bushings on both my trucks. It was a big improvement over the worn rubber bushings, don't know how they would compare with new rubber bushings. Works for me, though.

Bamm · 01-05-2005, 08:15 PM

Thanks Jim. Any of our vendors sell Prothane or a comparable brand? Thanks, .....Jerry

**Tim Christian** · 01-05-2005, 11:17 PM

Hey Jerry, I have everything you are looking for in stock. At home right now but can check price in morning. Thanks Tim

Bamm · 01-05-2005, 11:41 PM

Thanks Tim. I'm sending you a pm also with a few questions.........Thanks, .....Jerry

*Tanker350* · 01-07-2005, 10:45 PM

Personally I have the Poly Cab mounts. Do you know what happens to the rubber ones after 10-30 years, nothing left. If you can handlle (the stiffness) as they say which I don't think people can tell, stay with the poly ones where you know they will still be the same shape/size as when you first put them on.

01-05-2005, 12:48 PM	#1
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	If any vendors would like to quote a price.... I am looking for urethane cab mount bushings and rad support bushings for my '67. Also urethane sway bar bushings. If any vendors want to, please pm me with prices including shipping. Thanks, ......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-05-2005, 01:35 PM	#3
beagler Registered User Join Date: Oct 2004 Location: Cincy, OH Posts: 190	www.manestruckparts.com has them for 60 with everything but the nuts an bolts. __________________ '71 GMC 350 bored, cam'd, straight pipes LOOKING FOR A 4x4 redz 1970 K5 "Time has stopped for our classic trucks, and as such maintain nostalgia and simplicity of the vehicles and of an era passed."

01-05-2005, 02:30 PM	#4
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Can anyone out there who has personally had them installed tell me a little more about which ones are better? __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-05-2005, 05:00 PM	#5
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	Hey Jerry, I had polly body and spring bushings in a yota 4runner I had. I couldn't tell much difference in ride. They did firm it up some but it also had a 4" lift in it... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

01-05-2005, 08:10 PM	#6
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	I've got prothane body bushings on both my trucks. It was a big improvement over the worn rubber bushings, don't know how they would compare with new rubber bushings. Works for me, though. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-05-2005, 01:20 PM	#2
GreyHoundSteve Registered User Join Date: Oct 2004 Location: DFW TX Posts: 769	FYI, you may already know this but i have heard bad things about urethane cab mount bushings. People who have used them all tell me that they were too hard a hide and that went back to rubber can mounts.

01-05-2005, 08:15 PM	#7
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Thanks Jim. Any of our vendors sell Prothane or a comparable brand? Thanks, .....Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-05-2005, 11:17 PM	#8
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Hey Jerry, I have everything you are looking for in stock. At home right now but can check price in morning. Thanks Tim

01-05-2005, 11:41 PM	#9
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Thanks Tim. I'm sending you a pm also with a few questions.........Thanks, .....Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-07-2005, 10:45 PM	#10
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	Personally I have the Poly Cab mounts. Do you know what happens to the rubber ones after 10-30 years, nothing left. If you can handlle (the stiffness) as they say which I don't think people can tell, stay with the poly ones where you know they will still be the same shape/size as when you first put them on.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.