Do you think the general will still honor this? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mblackburnjr · 01-09-2005, 03:20 PM

Look what i found!

http://img.photobucket.com/albums/v2...1/bulletin.jpg

I ve got a stack of these 65-74 to go through! Just thought i'd share the first one i found on our trucks!

68w/sbc406 · 01-09-2005, 03:29 PM

cant read it, too small

poink 71 chev · 01-09-2005, 03:45 PM

I noticed a small icon near right side bottom and clicked on it to make it large enough to read.

toddtheodd · 01-09-2005, 03:50 PM

It says this;

Quote:

To: ALL CHEVROLET DEALERS

This bulletin is being re-issued to correct the torque specified on Page 2.

The rear bumper on 1969, 1970, and 1971 Blazers is attached to the frame with two inner braces and two outer braces. When towing a trailer with a bumper or combination frame bumper hitch, it is possible, under high tongue loads and rough road conditions, that the two inner braces will bend. As the inner braces bend, the outer braces pivot on their frame attaching bolts, and the bumper tilts noticeably downward.

Continued trailer towing will cause the inner braces to crack or eventually break. However, the bumper is still retained by the outer braces.

To prevent the possibility of bending, new reinforced inner bumper braces (Figure 1) entered production with Vehicle Identification Number KE1815615359.

The new braces are to be installed on any of the earlier assembled Blazers upon owner request. Owners are being advised to request such installation if the vehicle has or will have a trailer hitch installed that requires support from the bumper.

Chevrolet Motor Division
General Motors Corporation

C: Dealer List
Chevrolet List

2low72 · 01-09-2005, 03:55 PM

I take it to a dealership just to see the look on there face.

68w/sbc406 · 01-09-2005, 04:02 PM

i had some recalls on my honda and they couldnt do them cause there was over 80,000 miles. GM might have something like that too

Blue Beard · 01-09-2005, 05:20 PM

And I've got a couple sitting here....might be fun to go to a dealer..

Longhorn Man · 01-09-2005, 07:03 PM

I have the recall\ papers for the old motor mounts....doesn't say anything about limitations, nor original owner's name on it anywhere...

mblackburnjr · 01-09-2005, 07:37 PM

Hey Andy,..what year was the motor mount recall?....I know i seen it,but cant find it again..It had a diagram with a cable that the dealer was supposed to use....Wonder if anybody has any of these,dealer installed on there truck...
On a different note,i glad this isnt the vega board! They evidently were some real p.o.s.'s!

Longhorn Man · 01-09-2005, 08:50 PM

That would be May of '72.

01-09-2005, 03:20 PM	#1
mblackburnjr collector of vintage rust Join Date: Apr 2004 Location: southern ohio Posts: 421	Do you think the general will still honor this? Look what i found! http://img.photobucket.com/albums/v2...1/bulletin.jpg I ve got a stack of these 65-74 to go through! Just thought i'd share the first one i found on our trucks!

01-09-2005, 03:29 PM	#2
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	cant read it, too small __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

01-09-2005, 03:55 PM	#5
2low72 Registered User Join Date: Mar 2004 Location: Cheyenne, Wy Posts: 555	I take it to a dealership just to see the look on there face. __________________ 2014 GMC Yukon XL (Wifey's) 2004 Chevy Silverado Crew Cab Z71

01-09-2005, 04:02 PM	#6
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	i had some recalls on my honda and they couldnt do them cause there was over 80,000 miles. GM might have something like that too __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

01-09-2005, 05:20 PM	#7
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	And I've got a couple sitting here....might be fun to go to a dealer.. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-09-2005, 03:45 PM	#3
poink 71 chev Registered User Join Date: Nov 2004 Posts: 55	I noticed a small icon near right side bottom and clicked on it to make it large enough to read.

01-09-2005, 07:03 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I have the recall\ papers for the old motor mounts....doesn't say anything about limitations, nor original owner's name on it anywhere...

01-09-2005, 07:37 PM	#9
mblackburnjr collector of vintage rust Join Date: Apr 2004 Location: southern ohio Posts: 421	Hey Andy,..what year was the motor mount recall?....I know i seen it,but cant find it again..It had a diagram with a cable that the dealer was supposed to use....Wonder if anybody has any of these,dealer installed on there truck... On a different note,i glad this isnt the vega board! They evidently were some real p.o.s.'s!

01-09-2005, 08:50 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	That would be May of '72.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.