67 C10 for sale $400.00 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BadBowtie · 01-08-2005, 10:07 PM

I'm in a bind

so I'm getting rid of my baby. Note the truck is completely apart. it has the origanal 292 that has been converted to a floor shift(3spd). Brand new rims(AR 767) tires are good. The floor of the cab is really ruff the bed is not to bad. The doghouse is good. the motor runs strong tranny is good. everything is here for it to be put together, I just need the cash. when i got it it had been lowered(springs heated).

If you have any questions e-mail me or call 1-317-994-5616

bagged91 · 01-08-2005, 10:10 PM

Not trying to flame you but you should post this in the PARTS section of the forum. You will get a better response there. Also, ya got any pics?

Super Duck · 01-08-2005, 10:12 PM

definatly I want pics!!!!!!!!!!!!!

Blue Beard · 01-08-2005, 11:14 PM

Don't think it will last long at that price...

Super Duck · 01-08-2005, 11:17 PM

thats why I want pics. my wife would shoot me if I bought it sight un seen

BadBowtie · 01-09-2005, 12:07 AM

Sorry but I don't have any pics. IT IS IN PEICES. I bought the truck to restore but before I could get started putting it back together I ran in to some money problems. It looks pretty ruff. It sat in a feild for at least 15 years. It needs a new floor pan on the drivers side of cab. rockers and corners on both sides. The bed is solid but looks bad. The chassis is in excelent shape except for the springs. It will run and drive when put together. I haven't done any work to it except to make it flor shift before I took it apart. The drivers side cab mounts were gone when i bought it. As far as pics go it might take a couple of days if I can get them at all. If it helps any I live in Indiana near Lebanon a couple of miles from I-74. Again it needs work. But if nothing else it has a solid chassis and engine.

Super Duck · 01-09-2005, 12:39 AM

long bed or short, fleet or step. what do you consider rough? what shape is the glass in? do you have a good title? can it be put back together enough to ship? I would realy like to see what you have. I am interested but like I said my wife would kill me if I bought a truck sight un seen.

luckydog · 01-09-2005, 11:50 AM

I'd be interested if it's a short fleet. Put me next in line.

luckydog · 01-09-2005, 11:52 AM

Oh and if you're interested in parting it, I'd be interested in the doghouse. Thanks.

BadBowtie · 01-09-2005, 01:13 PM

If enough people are wanting parts I will part it out, jaust tell me what you need and make an offer Also it's a fleetside longbed, Still looking for a camera. the truck is a flat black, original color was a red-orange. The truck has cutouts for shoulder belts although they are not there, also has driverside sunvisor installed plus passenge but was never cut out to install.I'll try and pics as soon as possible

BadBowtie · 01-09-2005, 04:37 PM

A few Pics of the truck. If you want more or specific pics let me know. Thanks....

BadBowtie · 01-09-2005, 04:48 PM

Ok the pics won't load if you really want them i can try to email them.

luckydog · 01-09-2005, 06:30 PM

PM sent...

1969K10 · 01-10-2005, 01:53 PM

Is this a coil spring or leaf spring truck?

01-08-2005, 10:07 PM	#1
BadBowtie Registered User Join Date: Aug 2004 Location: Jamestown Indiana Posts: 22	67 C10 for sale $400.00 I'm in a bind so I'm getting rid of my baby. Note the truck is completely apart. it has the origanal 292 that has been converted to a floor shift(3spd). Brand new rims(AR 767) tires are good. The floor of the cab is really ruff the bed is not to bad. The doghouse is good. the motor runs strong tranny is good. everything is here for it to be put together, I just need the cash. when i got it it had been lowered(springs heated). If you have any questions e-mail me or call 1-317-994-5616

01-08-2005, 10:10 PM	#2
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Not trying to flame you but you should post this in the PARTS section of the forum. You will get a better response there. Also, ya got any pics? __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-08-2005, 10:12 PM	#3
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	definatly I want pics!!!!!!!!!!!!! __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

01-08-2005, 11:14 PM	#4
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Don't think it will last long at that price... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-08-2005, 11:17 PM	#5
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	thats why I want pics. my wife would shoot me if I bought it sight un seen __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

01-09-2005, 12:07 AM	#6
BadBowtie Registered User Join Date: Aug 2004 Location: Jamestown Indiana Posts: 22	Sorry but I don't have any pics. IT IS IN PEICES. I bought the truck to restore but before I could get started putting it back together I ran in to some money problems. It looks pretty ruff. It sat in a feild for at least 15 years. It needs a new floor pan on the drivers side of cab. rockers and corners on both sides. The bed is solid but looks bad. The chassis is in excelent shape except for the springs. It will run and drive when put together. I haven't done any work to it except to make it flor shift before I took it apart. The drivers side cab mounts were gone when i bought it. As far as pics go it might take a couple of days if I can get them at all. If it helps any I live in Indiana near Lebanon a couple of miles from I-74. Again it needs work. But if nothing else it has a solid chassis and engine.

01-09-2005, 12:39 AM	#7
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	long bed or short, fleet or step. what do you consider rough? what shape is the glass in? do you have a good title? can it be put back together enough to ship? I would realy like to see what you have. I am interested but like I said my wife would kill me if I bought a truck sight un seen. __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

01-09-2005, 11:50 AM	#8
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	I'd be interested if it's a short fleet. Put me next in line. __________________ Horsepower is how FAST you hit the wall, torque is how HARD

01-09-2005, 11:52 AM	#9
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	Oh and if you're interested in parting it, I'd be interested in the doghouse. Thanks. __________________ Horsepower is how FAST you hit the wall, torque is how HARD

01-09-2005, 01:13 PM	#10
BadBowtie Registered User Join Date: Aug 2004 Location: Jamestown Indiana Posts: 22	If enough people are wanting parts I will part it out, jaust tell me what you need and make an offer Also it's a fleetside longbed, Still looking for a camera. the truck is a flat black, original color was a red-orange. The truck has cutouts for shoulder belts although they are not there, also has driverside sunvisor installed plus passenge but was never cut out to install.I'll try and pics as soon as possible

01-09-2005, 04:37 PM	#11
BadBowtie Registered User Join Date: Aug 2004 Location: Jamestown Indiana Posts: 22	Pics of the truck for sale A few Pics of the truck. If you want more or specific pics let me know. Thanks....

01-09-2005, 04:48 PM	#12
BadBowtie Registered User Join Date: Aug 2004 Location: Jamestown Indiana Posts: 22	Ok the pics won't load if you really want them i can try to email them.

01-09-2005, 06:30 PM	#13
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	PM sent... __________________ Horsepower is how FAST you hit the wall, torque is how HARD

01-10-2005, 01:53 PM	#14
1969K10 Senior Member Join Date: Jul 2004 Location: Clarks Hill, Indiana Posts: 733	Is this a coil spring or leaf spring truck? __________________ 1969 K10 - V8, 465, 205, 12 bolt, D44 2002-current 1969 K20 - V8, 465, 221, Eaton, D44 2012-current Nothin' but drums on all 4 corners! past horses in the stable 72 C10-short step (97-02), 68 C10-long fleet (06-12)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.