WTB:Upper Control Arm Bushings ( Rubber ) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69ShortStep · 01-17-2005, 08:21 AM

Does anyone know where I can just buy the rubber shaft seals? Everywhere I have gone has wanted to sell me an entire shaft kit where my shaft and metal bushings are fine. The new shaft kits I have seen do not have these seals so the stores don't seem to stock them. Any help is appreciated.

Thanks in advance!!!

JimKshortstep4x4 · 01-17-2005, 09:23 AM

Are you looking for the shaft seals?

Jim

69ShortStep · 01-17-2005, 10:47 AM

I think that is there function. I need the piece between the shaft and threaded bushings.

JimKshortstep4x4 · 01-17-2005, 11:29 AM

I believe that I may have some decent used ones. If you don't find any, let me know and I will check on the ones that I have.

Jim

JJR · 01-17-2005, 11:55 AM

If you want new, LMC has them in their catalog and the part number for the upper seal is 34-0140 and runs $2.95 each. However, LMC shipping charges are high ($6.75 for orders under $20). I would also check with some of the board vendors to see if they have them but it's hard for them to stock/offer all these little items.

69ShortStep · 01-17-2005, 06:52 PM

Thanks for the Info. Vendors, feel free to let me know if you have them.

MOTHERTRUCKERS · 01-17-2005, 10:18 PM

I should have new ones i'll check tomorrow.

MOTHERTRUCKERS · 01-18-2005, 04:31 PM

Sorry only 2 left.

01-17-2005, 08:21 AM	#1
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	WTB:Upper Control Arm Shaft Seals Does anyone know where I can just buy the rubber shaft seals? Everywhere I have gone has wanted to sell me an entire shaft kit where my shaft and metal bushings are fine. The new shaft kits I have seen do not have these seals so the stores don't seem to stock them. Any help is appreciated. Thanks in advance!!! Last edited by 69ShortStep; 01-17-2005 at 11:19 AM.

01-17-2005, 10:47 AM	#3
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	I think that is there function. I need the piece between the shaft and threaded bushings. Attached Images Last edited by 69ShortStep; 01-17-2005 at 11:12 AM.

01-17-2005, 11:55 AM	#5
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	If you want new, LMC has them in their catalog and the part number for the upper seal is 34-0140 and runs $2.95 each. However, LMC shipping charges are high ($6.75 for orders under $20). I would also check with some of the board vendors to see if they have them but it's hard for them to stock/offer all these little items. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

01-17-2005, 10:18 PM	#7
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	I should have new ones i'll check tomorrow. __________________ Rest in Peace Ed. Thanks for all the good times.

01-18-2005, 04:31 PM	#8
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Sorry only 2 left. __________________ Rest in Peace Ed. Thanks for all the good times.

01-17-2005, 09:23 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Are you looking for the shaft seals? Jim

01-17-2005, 11:29 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I believe that I may have some decent used ones. If you don't find any, let me know and I will check on the ones that I have. Jim

01-17-2005, 06:52 PM	#6
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	Thanks for the Info. Vendors, feel free to let me know if you have them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.