350 Vortec heads F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

John39671 · 01-21-2005, 02:04 PM

Heads have been completly rebuilt with valves ground, surfaced for flat, magged for crackes, rocker arms and fulcrums have been checked, new springs and valve stem seals. These are the 64 cc version casting, casting number is 12558062. Same as the early camel hump heads these flow a lot better. Asking 600 OBO. I will post pics today. Numbers can be verified at www.mortec.com

John39671 · 01-21-2005, 04:18 PM

Head pics

gldevall · 01-21-2005, 05:21 PM

$600??? Good luck.

John39671 · 01-21-2005, 05:25 PM

Have you priced them latley. A good rebuilt set like these are more than that. And I said make offer.

**bigunde** · 01-21-2005, 06:44 PM

Scoggin Dickey Chevrolet has them for around $249 each on sale right now.Just my .02 worth not being a wise guy.

http://www.sdpc2000.com/catalog/3129...nder-Heads.htm

roj2323 · 01-21-2005, 07:25 PM

12558062...98......350..........L31 Vortec, truck, 64cc chambers, 1.94/1.5, 170cc intake port

good luck

SCOTI · 01-21-2005, 08:46 PM

Are the springs up-graded or stock?

John39671 · 01-21-2005, 10:03 PM

New, will cover up to a .550 lift cam

01-21-2005, 02:04 PM	#1
John39671 Registered User Join Date: Oct 2004 Location: Baker City,Oregon Posts: 278	350 Vortec heads F/S Heads have been completly rebuilt with valves ground, surfaced for flat, magged for crackes, rocker arms and fulcrums have been checked, new springs and valve stem seals. These are the 64 cc version casting, casting number is 12558062. Same as the early camel hump heads these flow a lot better. Asking 600 OBO. I will post pics today. Numbers can be verified at www.mortec.com __________________ Dissabled Veteran U.S.M.C 1985-1989

01-21-2005, 04:18 PM	#2
John39671 Registered User Join Date: Oct 2004 Location: Baker City,Oregon Posts: 278	Head pics Attached Images __________________ Dissabled Veteran U.S.M.C 1985-1989

01-21-2005, 05:21 PM	#3
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	$600??? Good luck. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

01-21-2005, 05:25 PM	#4
John39671 Registered User Join Date: Oct 2004 Location: Baker City,Oregon Posts: 278	Have you priced them latley. A good rebuilt set like these are more than that. And I said make offer. __________________ Dissabled Veteran U.S.M.C 1985-1989

01-21-2005, 06:44 PM	#5
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	Scoggin Dickey Chevrolet has them for around $249 each on sale right now.Just my .02 worth not being a wise guy. http://www.sdpc2000.com/catalog/3129...nder-Heads.htm Last edited by bigunde; 01-21-2005 at 08:52 PM.

01-21-2005, 07:25 PM	#6
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	12558062...98......350..........L31 Vortec, truck, 64cc chambers, 1.94/1.5, 170cc intake port good luck

01-21-2005, 08:46 PM	#7
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Are the springs up-graded or stock? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-21-2005, 10:03 PM	#8
John39671 Registered User Join Date: Oct 2004 Location: Baker City,Oregon Posts: 278	New, will cover up to a .550 lift cam __________________ Dissabled Veteran U.S.M.C 1985-1989



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.