Recommendations on rear tires? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 01-23-2005, 07:33 PM

Okay guys I won these tires and rims on ebay this morning and am really excited about putting them on my truck. I'm going to have a 4/6 drop. They are 235/50/17-all 4 of them. I think that's good for the front, but what size would you guys recommend for the rear? They are alzo 9 inches wide. Just not sure what size to go with.

Tx Firefighter · 01-23-2005, 07:36 PM

I've run 275/50/17 on the rear of some of my trucks. I love em. They are 28 inches tall which is close to stock tire height.

They look great under a 6 inch rear drop too.

5150 · 01-23-2005, 07:39 PM

Txfirefigher-think some 255/40/17's would look okay?

Love the crane!

Tx Firefighter · 01-23-2005, 07:44 PM

Man, I'm out on anything shorter than a 50 series. The reason I don't run 17's on my trucks anymore is because I bent a few here and there because of short tires.

Here's a 97 I used to have. It has the perfect set of tires in my opinion.

Front is 255/50/17
Rear is 275/50/17

They give a big and little appearance and both sizes are tall enough that I never bent a wheel or even dinged one slightly.

You will bend wheels if you go too short on tires.

Dual quad · 01-23-2005, 09:46 PM

Yellow -

You might want to give some thought to how much vertical space (reveal) you want to leave (if any) between the tire and the fender lip. A 255/40/17 is only 26" tall and might look smallish. For reference, take a look at ECE's website at both their project '68 and also "this old truck" vehicles. I too have a new 4/6 drop and am trying to decide between F - 255/50/17 with R - 275/50/17 or F - 255/60/17 with R - 275/60/17. The later set are quite tall and fully fill the wheelwell.

01-23-2005, 07:33 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Recommendations on rear tires? Okay guys I won these tires and rims on ebay this morning and am really excited about putting them on my truck. I'm going to have a 4/6 drop. They are 235/50/17-all 4 of them. I think that's good for the front, but what size would you guys recommend for the rear? They are alzo 9 inches wide. Just not sure what size to go with. Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-23-2005, 07:36 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I've run 275/50/17 on the rear of some of my trucks. I love em. They are 28 inches tall which is close to stock tire height. They look great under a 6 inch rear drop too. __________________ I'm on the Instagram- @Gearhead_Kevin

01-23-2005, 07:39 PM	#3
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Txfirefigher-think some 255/40/17's would look okay? Love the crane! __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-23-2005, 07:44 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Man, I'm out on anything shorter than a 50 series. The reason I don't run 17's on my trucks anymore is because I bent a few here and there because of short tires. Here's a 97 I used to have. It has the perfect set of tires in my opinion. Front is 255/50/17 Rear is 275/50/17 They give a big and little appearance and both sizes are tall enough that I never bent a wheel or even dinged one slightly. You will bend wheels if you go too short on tires. Attached Images __________________ I'm on the Instagram- @Gearhead_Kevin

01-23-2005, 09:46 PM	#5
Dual quad Smell that burnin' rubber Join Date: Sep 2000 Location: Ontario Posts: 171	Yellow - You might want to give some thought to how much vertical space (reveal) you want to leave (if any) between the tire and the fender lip. A 255/40/17 is only 26" tall and might look smallish. For reference, take a look at ECE's website at both their project '68 and also "this old truck" vehicles. I too have a new 4/6 drop and am trying to decide between F - 255/50/17 with R - 275/50/17 or F - 255/60/17 with R - 275/60/17. The later set are quite tall and fully fill the wheelwell.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.