Xmember install progress - The 1947 - Present Chevrolet & GMC Truck Message Board Network

XXL · 01-24-2005, 01:16 PM

I drove my truck up to slammed67's place this weekend for the xmember swap. Here's progress...

XXL · 01-24-2005, 01:18 PM

and then after the

refreshments...

**lolife99** · 01-24-2005, 01:21 PM

XXL,... What are you going to do with the old crossmember? I'm looking for one to cut up.

XXL · 01-24-2005, 07:39 PM

Quote:

Originally Posted by lolife99

XXL,... What are you going to do with the old crossmember? I'm looking for one to cut up.

...

**lolife99** · 01-24-2005, 09:39 PM

PM'd you,...

phantom dually · 01-24-2005, 10:09 PM

R U done yet??

XXL · 01-24-2005, 10:14 PM

Nice road rash I've got on the front edge of that control arm. Note: Somewhere in Wichita there's a missing yellow dot from the road.

XXL · 01-25-2005, 01:17 PM

slammed67 is such a diligent worker. Here's a progress pic...

XXL · 01-25-2005, 01:59 PM

more...

XXL · 01-25-2005, 02:00 PM

BTW... capt kaos, we discussed potential tie rod clearance issues, but you felt it wouldn't be a problem. Oops

grnddwn · 01-25-2005, 02:25 PM

I hear grinding noises in your future. I"ve had to do that to every crossmember I've built so far same spot.

Slammed67 · 01-25-2005, 03:45 PM

Quote:

I hear grinding noises in your future.

Yes, that is what I'll be doing this evening, after a few beers of course

SCOTI · 01-25-2005, 03:45 PM

XXL, CaptKaos, or Slammed, how much of notch is that crossmember?

Slammed67 · 01-25-2005, 03:46 PM

1.5"

XXL · 01-25-2005, 05:53 PM

Quote:

Originally Posted by Slammed67

Yes, that is what I'll be doing this evening, after a few beers of course

Hey, that thing's a short bed stepside with a raised floor. It'll only hold so much beer!

fastbagged68 · 01-25-2005, 06:20 PM

How come there is not alot of Pabst Blue Ribbon. I see ALOT of Lite's though. Pabst Blue Ribbon is the poor boy special!

phantom dually · 01-25-2005, 10:33 PM

OUCH I remember asking those questions to Bill Turner when I was only going to do the member and not the Rack and pinion. He spoke of turning the parts backwards somehow?? Not sure if he was blowing $hit up my ARSE or what??

XXL · 01-26-2005, 12:16 AM

Quote:

Originally Posted by phantom dually

OUCH I remember asking those questions to Bill Turner...

But Bill Turner is a nice guy and, for those of you who don't know slammed67, he's quite the bleeding cl!t {inside joke}

SCOTI · 01-26-2005, 12:01 PM

Slammed, you have PM.

XXL · 01-26-2005, 01:36 PM

Almost done...

XXL · 01-26-2005, 01:38 PM

Let the problems begin...

fastbagged68 · 01-26-2005, 02:03 PM

Where are your spacers for the upper control arms? You also need your borgenson joints to clear your upper arm, any time you go that low you are going to need to do it.
Where are the budweisers?

Slammed67 · 01-26-2005, 02:33 PM

Quote:

Where are your spacers for the upper control arms?

I haven't put them in yet. Look at the first pic in XXL's last post. See how one side of the a-arm shaft where it bolts to the x-member is dished or cupped and the other side is flat? It looks like the dished part matches the curved surface on the cross member studs, but I don't think you'd want to put shims between those two non-flat surfaces. However, if you rotate them so the flat side is facing inwards, then the nuts would be against that dished a-arm shaft. Why is one side dished like that??? The '67-'72 shafts are flat on both sides which makes sense. So which way should they be installed?

Izzy · 01-26-2005, 02:41 PM

On my buddies 85 the shop that did the alignment used spacers that were dished to match the shaft on the outside of the spacer stack.

Slammed67 · 01-26-2005, 02:42 PM

Did '73+ trucks have such a spacer on them from the factory?? That's the only explanation I could come up with.

01-24-2005, 01:16 PM	#1
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Xmember install progress I drove my truck up to slammed67's place this weekend for the xmember swap. Here's progress... Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

01-24-2005, 01:18 PM	#2
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	and then after the refreshments... Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

01-24-2005, 01:21 PM	#3
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	XXL,... What are you going to do with the old crossmember? I'm looking for one to cut up. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-24-2005, 09:39 PM	#5
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	PM'd you,... __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-24-2005, 10:09 PM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	R U done yet?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-24-2005, 10:14 PM	#7
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Nice road rash I've got on the front edge of that control arm. Note: Somewhere in Wichita there's a missing yellow dot from the road. Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

01-25-2005, 01:17 PM	#8
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	slammed67 is such a diligent worker. Here's a progress pic... Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

01-25-2005, 01:59 PM	#9
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	more... Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

01-25-2005, 02:00 PM	#10
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	BTW... capt kaos, we discussed potential tie rod clearance issues, but you felt it wouldn't be a problem. Oops Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

01-25-2005, 02:25 PM	#11
grnddwn belly dragger Join Date: Feb 2002 Location: sherwood park AB. Canada Posts: 696	I hear grinding noises in your future. I"ve had to do that to every crossmember I've built so far same spot.

01-25-2005, 03:45 PM	#13
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	XXL, CaptKaos, or Slammed, how much of notch is that crossmember? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-25-2005, 03:46 PM	#14
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	1.5" __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

01-25-2005, 06:20 PM	#16
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	How come there is not alot of Pabst Blue Ribbon. I see ALOT of Lite's though. Pabst Blue Ribbon is the poor boy special!

01-25-2005, 10:33 PM	#17
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	OUCH I remember asking those questions to Bill Turner when I was only going to do the member and not the Rack and pinion. He spoke of turning the parts backwards somehow?? Not sure if he was blowing $hit up my ARSE or what?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-26-2005, 12:01 PM	#19
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Slammed, you have PM. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

01-26-2005, 01:36 PM	#20
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Almost done... Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

01-26-2005, 01:38 PM	#21
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Let the problems begin... Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

01-26-2005, 02:03 PM	#22
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Where are your spacers for the upper control arms? You also need your borgenson joints to clear your upper arm, any time you go that low you are going to need to do it. Where are the budweisers?

01-26-2005, 02:41 PM	#24
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	On my buddies 85 the shop that did the alignment used spacers that were dished to match the shaft on the outside of the spacer stack.

01-26-2005, 02:42 PM	#25
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Did '73+ trucks have such a spacer on them from the factory?? That's the only explanation I could come up with. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

Register or Log In To remove these advertisements.