How does this setup look? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1978steven · 01-24-2005, 09:53 PM

Here is a link to the suspension setup I would like to get for my '71. I was wondering what you guys thought of it? The kit I'm wanting is the 3"/4" drop they advertise on special for $549.00.

http://www.cpptalk.com/New_Products/...ses/CPR009.htm

Thanks for the help,
Steven

rustyold72 · 01-24-2005, 10:10 PM

Looks good, I prefer the spindle and spring combo for lowering the front (but that's just a personal preference)
It looks like a very complete kit

Tx Firefighter · 01-24-2005, 10:16 PM

Have you compared ECE parts to the CPP ones you listed?

1978steven · 01-24-2005, 10:37 PM

Quote:

Originally Posted by rustyold72

Looks good, I prefer the spindle and spring combo for lowering the front (but that's just a personal preference)
It looks like a very complete kit

I do agree with you on that, but I figured with just 3" in the front it would not be a big deal. What do you think?

1978steven · 01-24-2005, 10:40 PM

Quote:

Originally Posted by Tx Firefighter

Have you compared ECE parts to the CPP ones you listed?

No I haven't. Do you think there is a quality or price difference between the two? I'm really just looking right now. Do you have any suggestions?

rustyold72 · 01-24-2005, 10:54 PM

I like the ECE parts, I have the 2" drop spindles, and 2 inch drop coils for the front, and the 5" drop coils for the rear, with the shock relocater and track bar kit
The quality IMO is top notch, everthing fits like stock, with no tweaking (I've had some parts that require lots of tweaking), Can't say anything about the CPP, but for me it'll be nothing but ECE

bagged72blaz · 01-25-2005, 01:47 PM

I've seen front sway bar brackets that have a lower profile. I'd check into that.

Tx Firefighter · 01-25-2005, 04:09 PM

Quote:

Originally Posted by bagged72blaz

I've seen front sway bar brackets that have a lower profile. I'd check into that.

ECE sells those too. I wrote an FAQ article about swaybar install on a lowered truck. I used those brackets in the article.

01-24-2005, 09:53 PM	#1
1978steven Registered User Join Date: Oct 2004 Location: Currently New Windsor, NY but Texas is home Posts: 332	How does this setup look? Here is a link to the suspension setup I would like to get for my '71. I was wondering what you guys thought of it? The kit I'm wanting is the 3"/4" drop they advertise on special for $549.00. http://www.cpptalk.com/New_Products/...ses/CPR009.htm Thanks for the help, Steven __________________ 2002 Silverado 2500HD LB7 CCSB LT EFI Live by Rob at ATP, Edge CTS Insight DSP 5 control, S&B CAI, PPE boost valve, Pro Fab AIH, AirDog II 165, PPE WIF sensor delete plug, 5" stainless exhaust, Cognito braces & HD tie rods, H2's 315/70 R17 BFG's 2004 Tahoe LT 2006 Silverado Z71 LS 1971 Chevy C10

01-24-2005, 10:10 PM	#2
rustyold72 Registered User Join Date: Oct 2003 Location: Ark City KS Posts: 505	Looks good, I prefer the spindle and spring combo for lowering the front (but that's just a personal preference) It looks like a very complete kit __________________ 71 Chevy C10 "The Rust Bucket" 72 Chevy C10 apart in the garage 02 WS6 T/A Fast Black and bad@$$ 93 Nissan Pathfinder "Emily" Totaled RIP girl 05 Jeep Grand Cherokee-HEMI powered 87 Iroc Z28 305 TPI auto (crying out for an LS1 swap)

01-24-2005, 10:16 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Have you compared ECE parts to the CPP ones you listed? __________________ I'm on the Instagram- @Gearhead_Kevin

01-24-2005, 10:54 PM	#6
rustyold72 Registered User Join Date: Oct 2003 Location: Ark City KS Posts: 505	I like the ECE parts, I have the 2" drop spindles, and 2 inch drop coils for the front, and the 5" drop coils for the rear, with the shock relocater and track bar kit The quality IMO is top notch, everthing fits like stock, with no tweaking (I've had some parts that require lots of tweaking), Can't say anything about the CPP, but for me it'll be nothing but ECE __________________ 71 Chevy C10 "The Rust Bucket" 72 Chevy C10 apart in the garage 02 WS6 T/A Fast Black and bad@$$ 93 Nissan Pathfinder "Emily" Totaled RIP girl 05 Jeep Grand Cherokee-HEMI powered 87 Iroc Z28 305 TPI auto (crying out for an LS1 swap)

01-25-2005, 01:47 PM	#7
bagged72blaz Got L.E.D.s Join Date: Dec 2004 Location: Craig Co. Posts: 195	I've seen front sway bar brackets that have a lower profile. I'd check into that. __________________ Bagged 1972 2wd Blazer http://www.earlyclassic.com/home.aspx



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.