Any rust free cabs out there? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 01-20-2005, 11:23 PM

I'm in Minnesota and am wondering if it would be easier to just replace my cab rather than try to fix the screw ups from the last "body man". The floor is messed up, the rockers are crooked, and it was a little out of shape on the door openings (tight on top front, wide on the back), Anyway, there is no such thing as rust free up here. I would like to find out whats available, for how much and then figure out how much it would cost to get it here.

I'm not in a huge hurry, but I gotta start sometime.

HG

moodybo · 01-20-2005, 11:27 PM

Rust free cabs are usually connected to nice frames and beds!

green68c10 · 01-20-2005, 11:30 PM

I think a month or so ago Zoomy had a nice a/c cab

hgs_notes · 01-21-2005, 09:33 AM

Zoomy, thanks. You can e-mail me at hgs_notes@yahoo.com . How much you want, etc.

HG

72gord · 01-21-2005, 10:11 AM

I just looked at Zoomy's cab when I was there to pick up some other parts he hauled back for me, I was there on the 17th...that is one nice cab, if your seriously looking, your not going to find one better in the upper midwestern rust belt. IMO Gord

*Gee_Emm* · 01-21-2005, 10:29 AM

There is a place in Fairfax Iowa that brings in cabs and body parts from Texas, you might want to try and look them up.

hgs_notes · 01-21-2005, 10:33 AM

Thanks Gee_emm

hgs_notes · 01-21-2005, 10:47 AM

I checked the web site for Rust Free Parts in Iowa, they didn't list any 67-72 cabs, but I emailed an inquiry. The price I thought was steep, like 1350.00 for a cab. I can buy a rust free california truck down the road from me for $1100.00. Someone said the firewall was rusted on thatone, I'll have to check that out, because the rest of it was damn good. A small dent on a wheel well on the bed. No bed floor, but otherwise intact.

HG

trk101 · 01-23-2005, 09:49 PM

I have a rust free cab from Arizona $ 900.00 cash I am in Omaha Ne. call 402-731-2812 thank you

teeitup · 01-23-2005, 10:03 PM

I have a cab that needs rockers and pass floor pan has some rust, mounts are good.

hgs_notes · 01-23-2005, 11:10 PM

Teeitup, thanks but no. Thats kind of what I have now. Mine could be fixed, but not by me and the cost of a cab would probably be close to the body shop repair bill, though I haven't checked yet. I better do that.

HG

teeitup · 01-23-2005, 11:14 PM

I understand, around here to get rockers and corners installed its $500

legends · 01-25-2005, 07:30 PM

zoomy could you send pics to cmkm@lmf.net

71swb4x4 · 01-25-2005, 08:04 PM

I have a pretty nice 68 cab. The rockers and cab corners have been replaced. There is a dent in the back behind the bed that isn't too bad. It is not perfect but it is pretty nice.
I also have a 67 small window that is fairly solid but if I were going to use it I would replace some metal. It also has a sunroof

01-20-2005, 11:23 PM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Any rust free cabs out there? I'm in Minnesota and am wondering if it would be easier to just replace my cab rather than try to fix the screw ups from the last "body man". The floor is messed up, the rockers are crooked, and it was a little out of shape on the door openings (tight on top front, wide on the back), Anyway, there is no such thing as rust free up here. I would like to find out whats available, for how much and then figure out how much it would cost to get it here. I'm not in a huge hurry, but I gotta start sometime. HG __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

01-21-2005, 09:33 AM	#4
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Zoomy, thanks. You can e-mail me at hgs_notes@yahoo.com . How much you want, etc. HG __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

01-21-2005, 10:33 AM	#7
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Thanks Gee_emm __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

01-23-2005, 10:03 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I have a cab that needs rockers and pass floor pan has some rust, mounts are good. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-23-2005, 11:10 PM	#11
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Teeitup, thanks but no. Thats kind of what I have now. Mine could be fixed, but not by me and the cost of a cab would probably be close to the body shop repair bill, though I haven't checked yet. I better do that. HG __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

01-20-2005, 11:27 PM	#2
moodybo Registered User Join Date: Oct 2004 Location: Oklahoma Posts: 261	Rust free cabs are usually connected to nice frames and beds!

01-20-2005, 11:30 PM	#3
green68c10 Ditto Head Join Date: Oct 2004 Posts: 183	I think a month or so ago Zoomy had a nice a/c cab

01-21-2005, 10:11 AM	#5
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 602	I just looked at Zoomy's cab when I was there to pick up some other parts he hauled back for me, I was there on the 17th...that is one nice cab, if your seriously looking, your not going to find one better in the upper midwestern rust belt. IMO Gord

01-21-2005, 10:29 AM	#6
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	There is a place in Fairfax Iowa that brings in cabs and body parts from Texas, you might want to try and look them up.

01-21-2005, 10:47 AM	#8
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	I checked the web site for Rust Free Parts in Iowa, they didn't list any 67-72 cabs, but I emailed an inquiry. The price I thought was steep, like 1350.00 for a cab. I can buy a rust free california truck down the road from me for $1100.00. Someone said the firewall was rusted on thatone, I'll have to check that out, because the rest of it was damn good. A small dent on a wheel well on the bed. No bed floor, but otherwise intact. HG

01-23-2005, 09:49 PM	#9
trk101 Registered User Join Date: Sep 2004 Location: Omaha Ne. Posts: 361	I have a rust free cab from Arizona $ 900.00 cash I am in Omaha Ne. call 402-731-2812 thank you

01-23-2005, 11:14 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I understand, around here to get rockers and corners installed its $500 __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-25-2005, 07:30 PM	#13
legends Registered User Join Date: Jul 2004 Location: lebanon pa Posts: 81	zoomy could you send pics to cmkm@lmf.net

01-25-2005, 08:04 PM	#14
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I have a pretty nice 68 cab. The rockers and cab corners have been replaced. There is a dent in the back behind the bed that isn't too bad. It is not perfect but it is pretty nice. I also have a 67 small window that is fairly solid but if I were going to use it I would replace some metal. It also has a sunroof __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.