F/S 60-66 100+ parts for LWB restoration - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RedRooster · 12-21-2004, 01:57 PM

All Parts have been sold. Thanks everyone for the inquiries.

For Sale Numerous parts for a 60-66 Chevy Fleetside (Longbed) Pickup

I started on a ground up restoration about 6 or 7 years ago and could not finish because of time limitations as well as moving a couple of times. I got as far as tearing the truck completely down, sandblasting and powder coating the chassis and ordering a long list of NEW parts from places like Brothers Obsolete, Santa Fe, etc…

Space, time and funds are low and I want to see if anyone out there is interested in the parts I have accumulated. If so, I would prefer to make a single sale for the whole lot. The list is long (over 100 different items) so I will just post a general list and if anyone is interested I can email the complete list upon request. Basically I have most everything except Bed, Fenders, Engine and Transmission.
I am located in Tyrone, GA about 20 minutes south of Atlanta off of I-85. Must Pick Up.

Partial list:

Chassis – sand blasted and powder coated Black
Upper & Lower A-Arms - sand blasted and powder coated Black
Inner Fenders - sand blasted and powder coated Black
Motor Mounts - sand blasted and powder coated Black
SS Front Disc brake conversion kit
Universal wiring harness
Suspension parts
Miscellaneous cab parts – floor panels, rocker panels, etc
64 & 66 Owners Manuals, Accessory Listing, & Sales Brochures
Stainless Fuel lines
Brake Hoses
Carpet
Gray 60/40 seat

I also have some of the original parts like Steering wheel, Glove box door, ashtray, aluminum “Custom” cab corners, etc..

The rear axle (w/wheels) is already mounted to the chassis with new shocks and coil springs, the upper and lower A Arms are also mounted to the chassis, the front end has a temporary tow hitch mounted to it with temporary towing lights on the rear.

Over $6000 invested, Asking $1700.00 or make offer.

For more information or to obtain a complete list of parts send me an email or PM. I have not taken any pics but will do so upon request, most of the parts are in boxes. Serious inquiries only please.

RedRooster · 12-24-2004, 10:20 AM

No reasonable offers will be refused. Just ask you might be suprised.

Myride · 12-24-2004, 02:11 PM

How much for the ss front brake conversion kit? and will you ship Thanks.

Hotrodhenryj · 12-24-2004, 02:38 PM

I would be interested in the carpet if it is for the low hump and in black or blue. Do you have any other new parts not listed? Chuck

RedRooster · 12-24-2004, 11:11 PM

Myride,

I will get back with you next week about the SS Disc Brake Kit. I paid $899.95 + s/h and I will probably be asking a little less than half that + shipping if I sell it separately. All the parts are packed up in boxes so I will have to find the particular boxes that are part of the kit to see what the weight is for shipping. I will provide pics once I unpack the boxes. The kit was originally shipped in 3-5 separate boxes.

Let me know if you are interested.

Rick

BADBOY66 · 12-25-2004, 01:51 AM

how much on the floor pans and rockers?

john@thepier · 12-25-2004, 07:09 PM

I also am interested in the ss brake kit and suspension parts let me know if they are still for sale JOHN

Myride · 12-26-2004, 03:11 AM

Sounds good let me no. thanks

RedRooster · 12-27-2004, 11:33 AM

My preference is to sell the whole lot as one sale, so I will wait a week or two before I start selling individual parts. This stuff is taking up a lot of needed space and I really need to get rid of it as soon as possible. My business recently lost a major contract that causes me to drastically downsize and operate from my home, I will need space to put furniture and equipment Jan 31, 2005

BTW I made a mistake on the first post about the Front Disc brake kit, it is not SS. The brake line kit is SS.

PM or email me an offer for the entire list.

RedRooster · 01-03-2005, 07:45 PM

So far no offers on the whole shabang so I'll put this out there for a few days.

$1100 for everything listed, MUST PICK UP, take one take all...

Here's the complete list:

NEW PARTS:
Rear Coil Springs (mounted on chassis)
Front End Coils
Tie Rods
Pittman Arms
Brake Shoes
Gas Ryder Shocks (rears mounted on chassis)
How To Paint Your Truck Book
Book - 555 Restoration, Performance, & Maint Tips
Lower A-Arm Bumper
Inner Fender Seals - Sponge
Carpet Kit - Black
SS Disc/Drum Brake Line Set
6 Lug Disc Brake Conversion Kit - Complete With Booster & All Parts
Cab Front Floor Section
Front Fender Bolts
Fender To Cab Seals
Fender Welting-Black
Firewall Cover W/Jute Back
Glove Box Insert
Gas Filler Neck Grommet
Gas Filler Hose - 6"
Hood Brace Pad Set
Wiring Clips - 10pcs
Wiring Harness Straps
Hood-To-Cowl Seal
Hood-To-Radiator Seal Set
Inner Fender Mount Grommet
Interior Screw Set
Disc/Drum Power Booster
Interior Kick Panels
Heat Resistant Padding
Speedometer Cable-Steel
Rubber Bumper Kit
Rocker Panel - Left
Rear Spring Retainer Cup (mounted on chassis)
Rear Window Seal-Sm-Blk
Glove Box Screw Set
Small Item Attatchment Set
Voltage Reg Mount Grommet
Windshield Seal-Std
RR Control/Trailing Arm Bushing (mounted on chassis)
Rear Axle Control Arm Bolt (mounted on chassis)
Rear Axle Tie Rod Bushing (mounted on chassis)
Lower Control Arm Bumper
Upper Control Arm Bumper
Fender Braces
60-66 Chasis Sand Blasted & Powder Coated
Motor Mounts
Inner Fenders
A-Arms Upper Sand Blasted & Powder Coated
A-Arms Lower Sand Blasted & Powder Coated
60-72 Cab Windlace Black Foam Type Matl As Orig
60-66 Cab Mount Kit-1/2 Ton 2wd
55-72 Door Hinge Pin W/ 2 Brass Bushings
Door Weather Seal Adhesive Quality 3m Special Glue
Steering Mast Bearing Lower
60-66 Rear Hood To Body Seal
Front Lower Splash Pan To Radiator Seal
60-66 Hood Brace Sponge Seals
64-66 Front Fender Seal At Firewall
60-66 Inner Fender Seal At Firewall
64 Owners Manual
66 Owners Manual
64 Accessory Listing
66 Accessory Listing
60-66 Factory Assembly Manual
1964 Chevrolet Sales Brochure
1966 Chevrolet Sales Brochure
37-72 Steering Sector Seal & 2 Bushings
60-66 Steering Box Overhaul Kit-Bushings,Bearings,Etc
60-66 Brake Hose Front-2wd 1/2 3/4 &1ton
63-66 Brake Hose Rear 1/2 Ton W/Coil Springs 115" Wb
60-72 Floor Support-Front 2rqrd Per Truck
60-72 Floor Support-Rear Left 1 Rqrd Per Truck
60-72 Floor Support-Rear Right 1 Rqrd Per Truck
64-66 Floorboard Section-Left-Stamped Mtl
64-66 Floorboard Section-Right-Stamped Mtl
60-66 Inner Rocker Panel-Fits Left Or Right
60-66 Sill Plate Chrome-Fits On Cab Between Door Post (threshold)
55-72 Vertical Division Bar Channel Felt Liner-Glues To Channel
64-66 Window Channel
64-66 Beaded Window Seal-Catwhiskers-Preformed W/Clips Attached
Universal Wiring Harness

Also Included From Original Truck:
64 Cab - Floor and Corners W/Moderate Rust
L&R Doors Some Dents And Moderate Rust But All Parts Present
Glove Box Face
Steering Wheel
Steering Box
66 Speedo Panel
Heater Core
Aluminum "Custom" Panels that mount to Cab rear corners

qksilver · 01-04-2005, 09:05 PM

trying to get ahold of you..............scjkovach@aol.com
or check your PM that has my #
Thanks,
Steve

RedRooster · 01-05-2005, 12:48 AM

qksilver has currently has dibs on the complete list, if anything changes I will post updates. Thanks for the interest.

RR

JesseB · 01-19-2005, 03:46 PM

Can we get an update on if you still have any of the parts?

RedRooster · 01-19-2005, 07:31 PM

qksilver will be at my house to make the transaction Friday or Saturday. He has already made a 60% deposit on the entire list.

I will update this thread once the transaction has been completed, or if the items will be available again.

RR

RedRooster · 01-25-2005, 10:06 PM

All parts have been sold.

I do still have a 64 cab, but it has been stripped of all the interior parts.
Free to anyone that is interested, just send me a PM or email.

12-21-2004, 01:57 PM	#1
RedRooster Registered User Join Date: Dec 2004 Location: Tyrone, GA Posts: 8	Sold! - F/S 60-66 100+ parts for LWB restoration All Parts have been sold. Thanks everyone for the inquiries. For Sale Numerous parts for a 60-66 Chevy Fleetside (Longbed) Pickup I started on a ground up restoration about 6 or 7 years ago and could not finish because of time limitations as well as moving a couple of times. I got as far as tearing the truck completely down, sandblasting and powder coating the chassis and ordering a long list of NEW parts from places like Brothers Obsolete, Santa Fe, etc… Space, time and funds are low and I want to see if anyone out there is interested in the parts I have accumulated. If so, I would prefer to make a single sale for the whole lot. The list is long (over 100 different items) so I will just post a general list and if anyone is interested I can email the complete list upon request. Basically I have most everything except Bed, Fenders, Engine and Transmission. I am located in Tyrone, GA about 20 minutes south of Atlanta off of I-85. Must Pick Up. Partial list: Chassis – sand blasted and powder coated Black Upper & Lower A-Arms - sand blasted and powder coated Black Inner Fenders - sand blasted and powder coated Black Motor Mounts - sand blasted and powder coated Black SS Front Disc brake conversion kit Universal wiring harness Suspension parts Miscellaneous cab parts – floor panels, rocker panels, etc 64 & 66 Owners Manuals, Accessory Listing, & Sales Brochures Stainless Fuel lines Brake Hoses Carpet Gray 60/40 seat I also have some of the original parts like Steering wheel, Glove box door, ashtray, aluminum “Custom” cab corners, etc.. The rear axle (w/wheels) is already mounted to the chassis with new shocks and coil springs, the upper and lower A Arms are also mounted to the chassis, the front end has a temporary tow hitch mounted to it with temporary towing lights on the rear. Over $6000 invested, Asking $1700.00 or make offer. For more information or to obtain a complete list of parts send me an email or PM. I have not taken any pics but will do so upon request, most of the parts are in boxes. Serious inquiries only please. Last edited by RedRooster; 01-25-2005 at 10:02 PM.

12-24-2004, 02:38 PM	#4
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Carpet I would be interested in the carpet if it is for the low hump and in black or blue. Do you have any other new parts not listed? Chuck __________________ Arizona rust free sheetmetal

12-25-2004, 01:51 AM	#6
BADBOY66 born to drive a CHEVY Join Date: Nov 2004 Location: JANE,MO. Posts: 69	how much on the floor pans and rockers? __________________

12-24-2004, 10:20 AM	#2
RedRooster Registered User Join Date: Dec 2004 Location: Tyrone, GA Posts: 8	No reasonable offers will be refused. Just ask you might be suprised.

12-24-2004, 02:11 PM	#3
Myride Registered User Join Date: Mar 2002 Location: Pacific Northwest Posts: 292	How much for the ss front brake conversion kit? and will you ship Thanks.

12-24-2004, 11:11 PM	#5
RedRooster Registered User Join Date: Dec 2004 Location: Tyrone, GA Posts: 8	Myride, I will get back with you next week about the SS Disc Brake Kit. I paid $899.95 + s/h and I will probably be asking a little less than half that + shipping if I sell it separately. All the parts are packed up in boxes so I will have to find the particular boxes that are part of the kit to see what the weight is for shipping. I will provide pics once I unpack the boxes. The kit was originally shipped in 3-5 separate boxes. Let me know if you are interested. Rick

12-25-2004, 07:09 PM	#7
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	I also am interested in the ss brake kit and suspension parts let me know if they are still for sale JOHN

12-26-2004, 03:11 AM	#8
Myride Registered User Join Date: Mar 2002 Location: Pacific Northwest Posts: 292	Sounds good let me no. thanks

12-27-2004, 11:33 AM	#9
RedRooster Registered User Join Date: Dec 2004 Location: Tyrone, GA Posts: 8	My preference is to sell the whole lot as one sale, so I will wait a week or two before I start selling individual parts. This stuff is taking up a lot of needed space and I really need to get rid of it as soon as possible. My business recently lost a major contract that causes me to drastically downsize and operate from my home, I will need space to put furniture and equipment Jan 31, 2005 BTW I made a mistake on the first post about the Front Disc brake kit, it is not SS. The brake line kit is SS. PM or email me an offer for the entire list.

01-03-2005, 07:45 PM	#10
RedRooster Registered User Join Date: Dec 2004 Location: Tyrone, GA Posts: 8	So far no offers on the whole shabang so I'll put this out there for a few days. $1100 for everything listed, MUST PICK UP, take one take all... Here's the complete list: NEW PARTS: Rear Coil Springs (mounted on chassis) Front End Coils Tie Rods Pittman Arms Brake Shoes Gas Ryder Shocks (rears mounted on chassis) How To Paint Your Truck Book Book - 555 Restoration, Performance, & Maint Tips Lower A-Arm Bumper Inner Fender Seals - Sponge Carpet Kit - Black SS Disc/Drum Brake Line Set 6 Lug Disc Brake Conversion Kit - Complete With Booster & All Parts Cab Front Floor Section Front Fender Bolts Fender To Cab Seals Fender Welting-Black Firewall Cover W/Jute Back Glove Box Insert Gas Filler Neck Grommet Gas Filler Hose - 6" Hood Brace Pad Set Wiring Clips - 10pcs Wiring Harness Straps Hood-To-Cowl Seal Hood-To-Radiator Seal Set Inner Fender Mount Grommet Interior Screw Set Disc/Drum Power Booster Interior Kick Panels Heat Resistant Padding Speedometer Cable-Steel Rubber Bumper Kit Rocker Panel - Left Rear Spring Retainer Cup (mounted on chassis) Rear Window Seal-Sm-Blk Glove Box Screw Set Small Item Attatchment Set Voltage Reg Mount Grommet Windshield Seal-Std RR Control/Trailing Arm Bushing (mounted on chassis) Rear Axle Control Arm Bolt (mounted on chassis) Rear Axle Tie Rod Bushing (mounted on chassis) Lower Control Arm Bumper Upper Control Arm Bumper Fender Braces 60-66 Chasis Sand Blasted & Powder Coated Motor Mounts Inner Fenders A-Arms Upper Sand Blasted & Powder Coated A-Arms Lower Sand Blasted & Powder Coated 60-72 Cab Windlace Black Foam Type Matl As Orig 60-66 Cab Mount Kit-1/2 Ton 2wd 55-72 Door Hinge Pin W/ 2 Brass Bushings Door Weather Seal Adhesive Quality 3m Special Glue Steering Mast Bearing Lower 60-66 Rear Hood To Body Seal Front Lower Splash Pan To Radiator Seal 60-66 Hood Brace Sponge Seals 64-66 Front Fender Seal At Firewall 60-66 Inner Fender Seal At Firewall 64 Owners Manual 66 Owners Manual 64 Accessory Listing 66 Accessory Listing 60-66 Factory Assembly Manual 1964 Chevrolet Sales Brochure 1966 Chevrolet Sales Brochure 37-72 Steering Sector Seal & 2 Bushings 60-66 Steering Box Overhaul Kit-Bushings,Bearings,Etc 60-66 Brake Hose Front-2wd 1/2 3/4 &1ton 63-66 Brake Hose Rear 1/2 Ton W/Coil Springs 115" Wb 60-72 Floor Support-Front 2rqrd Per Truck 60-72 Floor Support-Rear Left 1 Rqrd Per Truck 60-72 Floor Support-Rear Right 1 Rqrd Per Truck 64-66 Floorboard Section-Left-Stamped Mtl 64-66 Floorboard Section-Right-Stamped Mtl 60-66 Inner Rocker Panel-Fits Left Or Right 60-66 Sill Plate Chrome-Fits On Cab Between Door Post (threshold) 55-72 Vertical Division Bar Channel Felt Liner-Glues To Channel 64-66 Window Channel 64-66 Beaded Window Seal-Catwhiskers-Preformed W/Clips Attached Universal Wiring Harness Also Included From Original Truck: 64 Cab - Floor and Corners W/Moderate Rust L&R Doors Some Dents And Moderate Rust But All Parts Present Glove Box Face Steering Wheel Steering Box 66 Speedo Panel Heater Core Aluminum "Custom" Panels that mount to Cab rear corners

01-04-2005, 09:05 PM	#11
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	trying to get ahold of you..............scjkovach@aol.com or check your PM that has my # Thanks, Steve

01-05-2005, 12:48 AM	#12
RedRooster Registered User Join Date: Dec 2004 Location: Tyrone, GA Posts: 8	qksilver has currently has dibs on the complete list, if anything changes I will post updates. Thanks for the interest. RR

01-19-2005, 03:46 PM	#13
JesseB Registered User Join Date: Mar 2003 Location: San Antonio, Texas Posts: 17	Can we get an update on if you still have any of the parts?



Register or Log In To remove these advertisements.

01-19-2005, 07:31 PM	#14
RedRooster Registered User Join Date: Dec 2004 Location: Tyrone, GA Posts: 8	qksilver will be at my house to make the transaction Friday or Saturday. He has already made a 60% deposit on the entire list. I will update this thread once the transaction has been completed, or if the items will be available again. RR

01-25-2005, 10:06 PM	#15
RedRooster Registered User Join Date: Dec 2004 Location: Tyrone, GA Posts: 8	All parts have been sold. I do still have a 64 cab, but it has been stripped of all the interior parts. Free to anyone that is interested, just send me a PM or email.

Register or Log In To remove these advertisements.