01-25-2005, 03:54 PM | #1 |
cantontruck
Join Date: Oct 2004
Location: Canton,Texas
Posts: 27
|
electrical problem
When I turn on the head lights, the right turn signal light comes on. No flashing, just lights up. Any ideas? Thanks
|
01-25-2005, 05:24 PM | #2 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
It's supposed to, that's one of your parking lights. The left one should come on too.
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
01-25-2005, 05:29 PM | #3 | |
Resident Curmudgeon
Join Date: Dec 1999
Location: NH
Posts: 6,664
|
Quote:
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all |
|
01-25-2005, 07:21 PM | #4 | |
cantontruck
Join Date: Oct 2004
Location: Canton,Texas
Posts: 27
|
turn signals
Quote:
|
|
01-25-2005, 07:51 PM | #5 |
CCRider
Join Date: Feb 2000
Location: Olive Branch,MS,USA
Posts: 2,232
|
I had this same problem....the dash cluster was grounded by a clip that just clipped on the bottom of the dash....replaced the clip with a crimp on terminal and screwed it to the bottom on the dash...no more problems
__________________
72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS |
01-25-2005, 11:11 PM | #6 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Whoops, should've read it better. Mine did that when I first started working on my truck, both of the indicators would light up when I turned the parking lights or headlights on but after I removed and re-installed the cluster after repainting the gauge needles it stopped. So it's probably a ground issue as mentioned above.
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
01-26-2005, 04:43 PM | #7 |
Franko72
Join Date: May 2004
Location: Cincinnati,Ohio
Posts: 471
|
If you still have problems after trying to ground the guage cluster,try changing out the bulbs 1157's.check the bulb sockets inside for corosion or broken tangs.
__________________
1972 C20 cheyenne Super 402 BB/400 turbo LWB A/C Tilt, Cruise Control, Saddle tanks, Tach My Home Page Better to burn out than it is to rust |
01-26-2005, 05:20 PM | #8 |
cantontruck
Join Date: Oct 2004
Location: Canton,Texas
Posts: 27
|
Thanks for the input. Will try the fixes.
|
Bookmarks |
|
|