357 chevy short block (no heads) Missouri - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Grande Rojo · 01-17-2005, 01:35 PM

1991 SBC .040 over (357) 4 bolt mains ARP studs
GM steel crank one pc. rear main
Eagle H-beams rods
SRP pistons
Crane hydro roller 222/230@.050 520/550/ lift witha 1.5r
come with lifters and push rods
balanced
It only has about 1000 miles, if that.
no heads short block only
cost to build $2000.00 +/-

$1500.00
dangrider@yahoo.com

yes, I'll have some pic later this week. I have to get it out of storage.

TIMSPEED · 01-19-2005, 01:03 AM

So it's safe to assume that the entire bottom end is assembled and ready to rock? Can you check into shipping to 95351? Man, that's the EXACT shortblock I need, right down to the freakin cam! Are you sure that cam isn't 222/230 with 509/528?
Can you tell me exactly which pistons/rods/rings those are? (Part #'s) I'm VERY interested.

Grande Rojo · 01-19-2005, 04:31 PM

Quote:

Originally Posted by TIMSPEED

So it's safe to assume that the entire bottom end is assembled and ready to rock? Can you check into shipping to 95351? Man, that's the EXACT shortblock I need, right down to the freakin cam! Are you sure that cam isn't 222/230 with 509/528?
Can you tell me exactly which pistons/rods/rings those are? (Part #'s) I'm VERY interested.

You are right about the cam. It's a 509/528. .I was trying to think of the specs off the top of my head when I posted it. The pistons are SRP 139633 the rods are the Eagle ESP stock length H-beams with arp bolts. The motor is disassembled right now. What happend was I busted a valve spring and pulled the whole engine apart. When you have that much money into a motor you dont wanna' chance anything. I ended up selling the heads(vortecs) to a friend. I am now building a Bigblock . I was just going to keep the 357 around for a extra motor but this Damn big block is breaking me$$$

so I need to sell it. I still have the invoice form the machine shop.
If you are interested I would reassemble it for you and crate ship it

TIMSPEED · 01-19-2005, 06:47 PM

Damn, too bad you sold the Vortec's, cuz that'd be my motor entirely! If it's already disassembled, would you be interested in selling just the cam?

Grande Rojo · 01-27-2005, 11:15 AM

updated with pics

**********SOLD************

01-17-2005, 01:35 PM	#1
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	357 chevy short block (no heads) Missouri Updated with pictures 1991 SBC .040 over (357) 4 bolt mains ARP studs GM steel crank one pc. rear main Eagle H-beams rods SRP pistons Crane hydro roller 222/230@.050 520/550/ lift witha 1.5r come with lifters and push rods balanced It only has about 1000 miles, if that. no heads short block only cost to build $2000.00 +/- $1500.00 dangrider@yahoo.com yes, I'll have some pic later this week. I have to get it out of storage. Attached Images __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388 Last edited by Grande Rojo; 01-26-2005 at 11:44 PM.

01-19-2005, 01:03 AM	#2
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	So it's safe to assume that the entire bottom end is assembled and ready to rock? Can you check into shipping to 95351? Man, that's the EXACT shortblock I need, right down to the freakin cam! Are you sure that cam isn't 222/230 with 509/528? Can you tell me exactly which pistons/rods/rings those are? (Part #'s) I'm VERY interested. __________________ I have a few cars... See Them Here Last edited by TIMSPEED; 01-19-2005 at 01:11 AM.

01-19-2005, 06:47 PM	#4
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Damn, too bad you sold the Vortec's, cuz that'd be my motor entirely! If it's already disassembled, would you be interested in selling just the cam? __________________ I have a few cars... See Them Here

01-27-2005, 11:15 AM	#5
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	updated with pics ********SOLD********** __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388 Last edited by Grande Rojo; 01-27-2005 at 02:25 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.