67-72 layin rocker pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wannabeburbowner · 01-26-2005, 01:12 PM

Just like to see some pics of some 67-72 trucks layin the rockers on the ground. I am thinking about doing it to my 71 c10. Can you also list everything you had to do to it to get it to lay rocker? If I just put some 2600# firestone bags on an all stock truck, how low will it go??

Thanks for everything,

Travis

ssx · 01-26-2005, 03:30 PM

How's this:

ssx · 01-26-2005, 03:31 PM

Ooops, didn't work. Well here's the link:
http://cgi.msn.ebay.com/ebaymotors/w...522564371&rd=1

wannabeburbowner · 01-26-2005, 05:07 PM

That truck is beautiful!!!!

Liftedassdodge · 01-26-2005, 05:21 PM

thats one clean ride!

dregs454 · 01-26-2005, 06:26 PM

as requested

*Sublvr72* · 01-27-2005, 02:37 AM

Quote:

Originally Posted by dregs454

as requested

that second picture and last picture are the same truck. Man that thing is sweet. He lives out here by me in So Cal, so I see that truck all the time...

**N2TRUX** · 01-27-2005, 09:02 AM

That silver truck look killer...

**N2TRUX** · 01-27-2005, 09:03 AM

2.........

**N2TRUX** · 01-27-2005, 09:04 AM

Yeah, I know it's not "laying" rocker. This is as close as it needs to be in my opinion....

**N2TRUX** · 01-27-2005, 09:06 AM

*ghetocrewzer* · 01-27-2005, 09:37 AM

Here's my burb, lacks bout 1/4" from layin rocker but he!! its close LOL

wannabeburbowner · 01-27-2005, 02:03 PM

ghetocrewzer, what all did you have to do to get your burb that low?? Like I said, I am new to this just trying to find out how much work I am looking at to get my truck that low. What is your ride height on that burb compared to stock?? And N2TRUX, I agree that is all the lower that I really need to go, do you know what all was done to that?? I doubt if I have enough time/money to do all the work to my truck to get it to lay rocker. I just want to be pretty low.
Just figured that I would put a couple of pics of mine so you can see what I am starting with. Not as clean as your guys cali rides, but not a bad start for $400.

sneakysnake · 01-27-2005, 02:37 PM

ok

*ghetocrewzer* · 01-27-2005, 08:34 PM

Quote:

Originally Posted by wannabeburbowner

ghetocrewzer, what all did you have to do to get your burb that low?? Like I said, I am new to this just trying to find out how much work I am looking at to get my truck that low. What is your ride height on that burb compared to stock?? And N2TRUX, I agree that is all the lower that I really need to go, do you know what all was done to that?? I doubt if I have enough time/money to do all the work to my truck to get it to lay rocker. I just want to be pretty low.
Just figured that I would put a couple of pics of mine so you can see what I am starting with. Not as clean as your guys cali rides, but not a bad start for $400.

I cut my crossmember down 1.5" and am runnin upper bag plates with no lower cups, 2.5" dropped spindles, custom tierods, and rerouted steering shaft. The rear is just boxed original trailin arms, 12" monster notch, and custom panhard bar soon changin it to custom 2 link with wishbone third link.
Looks like u got a good one to start with to me mine was much ruffer when i started just been pluggin away and still gotta long ways to go on rust repair LOL

wannabeburbowner · 01-27-2005, 11:30 PM

Quote:

Originally Posted by ghetocrewzer

I cut my crossmember down 1.5" and am runnin upper bag plates with no lower cups, 2.5" dropped spindles, custom tierods, and rerouted steering shaft. The rear is just boxed original trailin arms, 12" monster notch, and custom panhard bar soon changin it to custom 2 link with wishbone third link.
Looks like u got a good one to start with to me mine was much ruffer when i started just been pluggin away and still gotta long ways to go on rust repair LOL

Do you have any pictures that will walk me through how to do a crossmember cut?? Or any websites that will show how to do it?? How hard is it to do, and what tools do you need?? Sorry for all the questions, but I would like to learn this stuff and try it myself if at all possible. I feel that I am pretty mechanically inclined, and I am not really afraid to try anything new. my uncle has a couple parts trucks that I can take the crossmember off of and try it on that first. That way if I mess it up I won't be out a truck. Was the full 12" notch really needed, or is that just what you chose?? What did you have to do with the floor then?? Your website said that there is no body drop...that's great. I have heard that you can get shorter mounts and do a body drop that way and then it is good enough to lay rocker...I may do that too, but I would have to mount the bumper a little lower also right??

Thanks

Travis

XXL · 01-27-2005, 11:54 PM

Quote:

Originally Posted by wannabeburbowner

Do you have any pictures that will walk me through how to do a crossmember cut??

linkie-poo

ssx · 01-28-2005, 03:29 AM

Hey N2TRUX, thanks for fixing my pic!

dropdprpls10 · 01-28-2005, 08:32 AM

heres a picture of a guy in a local truck club.. he's also on another forum i go on

01-26-2005, 01:12 PM	#1
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	67-72 layin rocker pics Just like to see some pics of some 67-72 trucks layin the rockers on the ground. I am thinking about doing it to my 71 c10. Can you also list everything you had to do to it to get it to lay rocker? If I just put some 2600# firestone bags on an all stock truck, how low will it go?? Thanks for everything, Travis __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

01-26-2005, 03:30 PM	#2
ssx Registered User Join Date: Dec 2004 Location: Kailua Kona, Hawaii Posts: 53	How's this: Last edited by N2TRUX; 01-27-2005 at 09:00 AM. Reason: fixed your pic

01-26-2005, 05:07 PM	#4
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	That truck is beautiful!!!! __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

01-26-2005, 06:26 PM	#6
dregs454 Killin' Time Join Date: Jul 2002 Location: Calgary, Alberta Posts: 221	as requested Attached Images __________________ NEED CORVETTE 1972 GMC C20 350, SM465, HEI Dynomax headers and 2.5" duals

01-27-2005, 09:04 AM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Yeah, I know it's not "laying" rocker. This is as close as it needs to be in my opinion.... Attached Images

01-26-2005, 03:31 PM	#3
ssx Registered User Join Date: Dec 2004 Location: Kailua Kona, Hawaii Posts: 53	Ooops, didn't work. Well here's the link: http://cgi.msn.ebay.com/ebaymotors/w...522564371&rd=1

01-26-2005, 05:21 PM	#5
Liftedassdodge The Stunt Guy Join Date: May 2003 Location: Danville, ca Posts: 132	thats one clean ride!

01-27-2005, 09:02 AM	#8
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	That silver truck look killer...

01-27-2005, 09:03 AM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	2.........

01-27-2005, 09:06 AM	#11
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Attached Images

01-27-2005, 09:37 AM	#12
ghetocrewzer Account Suspended Join Date: Feb 2004 Location: Sallis,MS Posts: 479	Here's my burb, lacks bout 1/4" from layin rocker but he!! its close LOL Last edited by ghetocrewzer; 01-27-2005 at 09:42 AM.

01-27-2005, 02:03 PM	#13
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	ghetocrewzer, what all did you have to do to get your burb that low?? Like I said, I am new to this just trying to find out how much work I am looking at to get my truck that low. What is your ride height on that burb compared to stock?? And N2TRUX, I agree that is all the lower that I really need to go, do you know what all was done to that?? I doubt if I have enough time/money to do all the work to my truck to get it to lay rocker. I just want to be pretty low. Just figured that I would put a couple of pics of mine so you can see what I am starting with. Not as clean as your guys cali rides, but not a bad start for $400. Attached Images __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon Last edited by wannabeburbowner; 01-27-2005 at 02:08 PM.

01-27-2005, 02:37 PM	#14
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	ok Attached Images

01-28-2005, 03:29 AM	#18
ssx Registered User Join Date: Dec 2004 Location: Kailua Kona, Hawaii Posts: 53	Hey N2TRUX, thanks for fixing my pic!

01-28-2005, 08:32 AM	#19
dropdprpls10 Registered User Join Date: Jun 2004 Location: Reading PA Posts: 164	heres a picture of a guy in a local truck club.. he's also on another forum i go on __________________ 98% of ALL fords are still on the road today... .... the other 2% made it home!!! where is the best place to park a ford???.. next to a fire station!!!! pictures of my new and old trucks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.