|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-29-2005, 02:18 PM
|
#1 |
|
Registered User
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,929
|
disk front brake prop valve help
ok all I have added disk brakes to the front of my 68. I have a prop valve off a 72. Does the larger (rearward) hole feed the front or the rear? I thought the front but wanted to make sure I am trying to get the brake lines run.
Thanks Dave
__________________
Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!" |
|
|
|
01-29-2005, 07:05 PM
|
#2 |
|
Custer had a plan too.
Join Date: Dec 2003
Location: No. California
Posts: 344
|
According to my manual:
on half tons the front bowl of the master cyl. feeds the front hole of the valve which feeds the front disks. on 3/4 tons, the rear master bowl feeds the front of the valve which feeds the front disks. Does that make sense?
__________________
72 K15 GMC (aka Big White) Performance Rockers, Cab Corners, and Floors Fossil Fuel Glutton Neighborhood Nuisance 98 BMW 540i for Speed (Sold  )05 Subaru Outback for mileage |
|
|
|
|
01-29-2005, 07:14 PM
|
#3 |
|
Registered User
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,929
|
yes Joe it does. I didnt have a manual for a 72 . The front one is the smaller of the 2.
Thanks for the info. Dave
__________________
Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!" |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
