Anyone near Belle Fourche,SD - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bobvilla67** · 01-30-2005, 06:36 PM

I'm watching a truck on ebay and wondering if I could find someone nearby that could haul it a few hours south toward Teeitups next week.thanks,bobby

71swb4x4 · 01-30-2005, 07:47 PM

I was watching that one too. Unfortunately it is on the wrong side of the state. It is at least 6 hours west of me. If someone could get it over to me I plan to make a trip to Teeitup's, hopefully in February.

**bobvilla67** · 01-30-2005, 07:50 PM

It's up to $455 now,so not sure how much more I am willing to go and still end up driving 19 hrs to get it.

71swb4x4 · 01-30-2005, 07:54 PM

19 hours, that's a road trip

454_72_4X4 · 01-30-2005, 08:15 PM

Sorry, OT but just wondering...71swb4x4, are you right in Brookings?
I've been through there quite a few times. A couple of years ago we paved the road out east of town that goes south to the new alcohol plant. Can't remember the little town out there. We also paved a section of I-29 north of Brookings, (Just north of the Estilline exit), the same year.
Brooking has one of my favorite pawn/tool shops too. Dakota tool and pawn or somethin like that.

71swb4x4 · 01-30-2005, 08:18 PM

Yes I am in Brookings. The Ethanol plant is near Aurora. The bodyshop I go to is in Aurora, since you had the paved road torn up I had to drive down gravel to get there.

The road is nice now though, good job

The pawn shop is pretty fun, I haven't made it there for a while.

draino76 · 01-30-2005, 08:26 PM

Quote:

Originally Posted by bobvilla67

I'm watching a truck on ebay and wondering if I could find someone nearby that could haul it a few hours south toward Teeitups next week.thanks,bobby

I'm about two and a half hours from bell, where is teeitups?

71swb4x4 · 01-30-2005, 08:52 PM

Teeitups is in Kansas, about 3 hours south of Omaha, NE.

01-30-2005, 06:36 PM	#1
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	Anyone near Belle Fourche,SD I'm watching a truck on ebay and wondering if I could find someone nearby that could haul it a few hours south toward Teeitups next week.thanks,bobby __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

01-30-2005, 07:47 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I was watching that one too. Unfortunately it is on the wrong side of the state. It is at least 6 hours west of me. If someone could get it over to me I plan to make a trip to Teeitup's, hopefully in February. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

01-30-2005, 07:50 PM	#3
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	It's up to $455 now,so not sure how much more I am willing to go and still end up driving 19 hrs to get it. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

01-30-2005, 07:54 PM	#4
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	19 hours, that's a road trip __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

01-30-2005, 08:15 PM	#5
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Sorry, OT but just wondering...71swb4x4, are you right in Brookings? I've been through there quite a few times. A couple of years ago we paved the road out east of town that goes south to the new alcohol plant. Can't remember the little town out there. We also paved a section of I-29 north of Brookings, (Just north of the Estilline exit), the same year. Brooking has one of my favorite pawn/tool shops too. Dakota tool and pawn or somethin like that. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

01-30-2005, 08:18 PM	#6
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Yes I am in Brookings. The Ethanol plant is near Aurora. The bodyshop I go to is in Aurora, since you had the paved road torn up I had to drive down gravel to get there. The road is nice now though, good job The pawn shop is pretty fun, I haven't made it there for a while. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

01-30-2005, 08:52 PM	#8
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Teeitups is in Kansas, about 3 hours south of Omaha, NE. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.