Houndstooth seat cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Southpa · 07-15-2002, 06:26 PM

I just got it off the bench and I can only say that the only good thing about it was finding that nickel. First off, there was about 100 strings holding it to the bench springs, had to use my trusty heavy duty zircon encrusted tweezers to loosen all those granny knots. Driver's side of the bench underneath is basically toast, just bare foam. I didn't even find an options list!

I was wondering what the best way to clean these coverings might be? Its loosely woven material with vinyl panel in the center. Can I just toss it into a washing machine and hang it up afterwards? or should I take it to the dry cleaners? rent a carpet steam cleaner?

07-15-2002, 06:26 PM	#1
Southpa Registered User Join Date: May 2000 Location: Victoria, BC, Canada Posts: 2,409	Houndstooth seat cover I just got it off the bench and I can only say that the only good thing about it was finding that nickel. First off, there was about 100 strings holding it to the bench springs, had to use my trusty heavy duty zircon encrusted tweezers to loosen all those granny knots. Driver's side of the bench underneath is basically toast, just bare foam. I didn't even find an options list! I was wondering what the best way to clean these coverings might be? Its loosely woven material with vinyl panel in the center. Can I just toss it into a washing machine and hang it up afterwards? or should I take it to the dry cleaners? rent a carpet steam cleaner? __________________ 1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.