bed floor needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

454_72_4X4 · 02-06-2005, 03:54 PM

I need a bed floor for my 72 (longbed). I recently got a bed from a friend that's in pretty good shape everywhere except the floor is gone (50%+ at least!) Farmer must have been haulin salt blocks in the middle of the bed or somethin!

Anyway, I thought maybe somebody has a bed with trashed sides and a decent floor for cheap. Doesn't have to be show quality by any means. Dents wouldn't even matter to much as long as it's solid.

I'm in northeast Missouri.

classicchev · 02-06-2005, 04:05 PM

Metal or wood, pm me if you need wood.

teeitup · 02-06-2005, 04:09 PM

I got a couple complete beds as you know, the blue one on top the other bed has a real good floor in it. Thanks Randy

454_72_4X4 · 02-06-2005, 04:32 PM

Opps, metal floor.

That blue bed looks like a pretty good bed though. you don't want to sell just the floor do ya? (Didn't think so.LOL)
How much for the floor or the whole bed?
Maybe trade ya my sides towards it?
Maybe I can sell my sides and buy yours...Hmmm

You're gonna force me to drive out there aint ya!LOL

cadiac · 02-06-2005, 09:55 PM

I have a long wide steel bottom,- it has some dents/not terrible. Very good driver piece/possibly straighten. It has 2-3 nickel/quarter size holes put in for electical cable??, that need welded shut. Back at the very rear/most common spot there is a spot /small hole to patch and one middle crossmember has a little rust in the front side. I've got over $100 in it, -will sell it for $80. I have another parts truck with about the same condition bottom so I won't need it. [Wichita, Kansas] Thanks -Steve

454_72_4X4 · 02-06-2005, 10:17 PM

Quote:

Originally Posted by cadiac

I have a long wide steel bottom,- it has some dents/not terrible. Very good driver piece/possibly straighten. It has 2-3 nickel/quarter size holes put in for electical cable??, that need welded shut. Back at the very rear/most common spot there is a spot /small hole to patch and one middle crossmember has a little rust in the front side. I've got over $100 in it, -will sell it for $80. I have another parts truck with about the same condition bottom so I won't need it. [Wichita, Kansas] Thanks -Steve

Sounds like that would work for me great. Got any pics.
I checked yahoo maps and I'm 422 miles from ya. Wouldn't be heading north or east anytime would ya?!

Also, Is it already taken apart?

cadiac · 02-06-2005, 10:25 PM

Not for a few months at least. 422? I see your in N E Mo, -what town? -must be east aways. I want to get this out of the garage but thats alot of miles. If your not in a hurry, maybe someone will take one apart thats got bad sides, -living closer. Don't trust yahoo maps, -I use that alot myself and they'll calculate by interstate routes only about all the time. If you put in wichita to Springfield Mo. for instance, they direct you south 150 miles to Oklahoma City -then up I44? N E. to Mo. Kinda hokey.

454_72_4X4 · 02-06-2005, 10:43 PM

I'm just west of Kahoka MO. (In the very northeast corner)
Yea I've noticed that about yahoo also.
I tried Kahoka to Wichita and come up with 422 miles and 6 hours, 30 minutes. Then I tried Kahoka to Meriden, (teeitup's) and come up with 291 miles and 6 hours, 4 minutes!
131 miles and 26 minutes difference! Must not be a speed limit on that stretch of road!
Shows the same route too.

I'll think about it and if nothin closer shows up I might have to make a road trip.

02-06-2005, 03:54 PM	#1
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	bed floor needed I need a bed floor for my 72 (longbed). I recently got a bed from a friend that's in pretty good shape everywhere except the floor is gone (50%+ at least!) Farmer must have been haulin salt blocks in the middle of the bed or somethin! Anyway, I thought maybe somebody has a bed with trashed sides and a decent floor for cheap. Doesn't have to be show quality by any means. Dents wouldn't even matter to much as long as it's solid. I'm in northeast Missouri. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-06-2005, 04:09 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I got a couple complete beds as you know, the blue one on top the other bed has a real good floor in it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-06-2005, 04:32 PM	#4
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Opps, metal floor. That blue bed looks like a pretty good bed though. you don't want to sell just the floor do ya? (Didn't think so.LOL) How much for the floor or the whole bed? Maybe trade ya my sides towards it? Maybe I can sell my sides and buy yours...Hmmm You're gonna force me to drive out there aint ya!LOL __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-06-2005, 10:43 PM	#8
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	I'm just west of Kahoka MO. (In the very northeast corner) Yea I've noticed that about yahoo also. I tried Kahoka to Wichita and come up with 422 miles and 6 hours, 30 minutes. Then I tried Kahoka to Meriden, (teeitup's) and come up with 291 miles and 6 hours, 4 minutes! 131 miles and 26 minutes difference! Must not be a speed limit on that stretch of road! Shows the same route too. I'll think about it and if nothin closer shows up I might have to make a road trip. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-06-2005, 04:05 PM	#2
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Metal or wood, pm me if you need wood.

02-06-2005, 09:55 PM	#5
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	I have a long wide steel bottom,- it has some dents/not terrible. Very good driver piece/possibly straighten. It has 2-3 nickel/quarter size holes put in for electical cable??, that need welded shut. Back at the very rear/most common spot there is a spot /small hole to patch and one middle crossmember has a little rust in the front side. I've got over $100 in it, -will sell it for $80. I have another parts truck with about the same condition bottom so I won't need it. [Wichita, Kansas] Thanks -Steve

02-06-2005, 10:25 PM	#7
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Not for a few months at least. 422? I see your in N E Mo, -what town? -must be east aways. I want to get this out of the garage but thats alot of miles. If your not in a hurry, maybe someone will take one apart thats got bad sides, -living closer. Don't trust yahoo maps, -I use that alot myself and they'll calculate by interstate routes only about all the time. If you put in wichita to Springfield Mo. for instance, they direct you south 150 miles to Oklahoma City -then up I44? N E. to Mo. Kinda hokey.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.