Wanted: NP205 or 208 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67_SS396 · 02-07-2005, 10:54 PM

We need a NP205 or 208 to go behind an SM465. The 208 in the truck has a blown case. Prefer in the DFW area, but will travel if the price is right.

Also need a Dana 44 for Chevy, gear ratio is not a big concern.

4bynut · 02-08-2005, 05:07 AM

Would you be interested in parting out the blown 208 you have? If it has a 32 spline input gear, I'd be interested in the gear. From what i've read it should be a 32 spline but not sure that's correct. Thank's Jason

57ringo · 02-08-2005, 09:57 AM

I've got a sm465/205 out of a 71 chevy I'll take $400. My friend lives in Grapevine and is up here a lot could haul it there.

matt67350 · 02-08-2005, 01:53 PM

I have a 208, was mated to a t350.
$150.00 It's in Ft Worth

67_SS396 · 02-08-2005, 07:23 PM

Thanks for the responses! I found a guy locally that has everything we need, tires, transfercase, diff and ds's. If for some reason it doesn't pan out, I'll let ya'll know.

The 208 case that is in the truck now, I believe is a 10 spline. I'll know for sure when we drop it.

02-07-2005, 10:54 PM	#1
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Wanted: NP205 or 208 / Dana 44 We need a NP205 or 208 to go behind an SM465. The 208 in the truck has a blown case. Prefer in the DFW area, but will travel if the price is right. Also need a Dana 44 for Chevy, gear ratio is not a big concern. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this." Last edited by 67_SS396; 02-07-2005 at 10:59 PM.

02-08-2005, 05:07 AM	#2
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Would you be interested in parting out the blown 208 you have? If it has a 32 spline input gear, I'd be interested in the gear. From what i've read it should be a 32 spline but not sure that's correct. Thank's Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

02-08-2005, 01:53 PM	#4
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	I have a 208, was mated to a t350. $150.00 It's in Ft Worth __________________ 69 swb stepside, rebuild and upgrade in progress

02-08-2005, 07:23 PM	#5
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Thanks for the responses! I found a guy locally that has everything we need, tires, transfercase, diff and ds's. If for some reason it doesn't pan out, I'll let ya'll know. The 208 case that is in the truck now, I believe is a 10 spline. I'll know for sure when we drop it. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

02-08-2005, 09:57 AM	#3
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	I've got a sm465/205 out of a 71 chevy I'll take $400. My friend lives in Grapevine and is up here a lot could haul it there.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.