Lots of parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 02-08-2005, 11:34 AM

PLEASE RESPOND TO THIS POST RATHER THAN PM'S TO KEEP EVERYONE IN THE RIGHT ORDER AND NO FEELINGS GET HURT.

I set of SBC Edelbrock valve covers.

They're in fair shape. The hole around the oil filler cap had a chip out of it, so someone used some JB Weld to build it back up. You can't see it when the filler cap is in place.

I'd rate them a 5 or 6 on 1-10 scale. They need polish and detail. Have been on my shop wall since the 80's.

They're old.

Sell for 50 bucks

Tx Firefighter · 02-08-2005, 11:37 AM

Small block power steering pump, brackets, pulley, and hoses.

Off a late 70's 350 truck.

Will fit any small block with accesory bolt holes. These are for long water pump setup. That means your alternator is on the passenger side of the engine.

35 bucks.

Tx Firefighter · 02-08-2005, 11:39 AM

Edelbrock valve cover breather.

It bolts on, so you need to drill holes to install.

I believe it's never been used.

I have never seen another like it.

10 bucks.

Tx Firefighter · 02-08-2005, 11:42 AM

Bunch of instrument cluster parts. Came out of who knows how many different trucks over the years.

20 bucks.

Tx Firefighter · 02-08-2005, 11:43 AM

Real nice restored 6 cylinder intake manifold.

Has been bead blasted and POR15 engine painted.

All threads are good and clean. No broke off bolt in the bottom like most have

20 bucks.

Tx Firefighter · 02-08-2005, 11:46 AM

Weiand aluminum SBC short water pump.

It's fairly old. It came off of my sister's Camaro which was turning exactly 12,578 RPM when the rods exited the block back in 1990.

Dirty and needs detailed.

Short water pump means your alternator is on the driver's side of the engine.

15 bucks.

dallas71 · 02-08-2005, 11:57 AM

tx, will the p/s pump and hoses bolt up to the existing box???

dallas71 · 02-08-2005, 12:02 PM

i'll take it then.....cheaper than converting from my existing long pump and pulleys to short pump and having to buy the pulleys....let me know how you want to get together....

Tx Firefighter · 02-08-2005, 12:03 PM

Can you come to Hurst and pick it up at my fire station?

Bamm · 02-08-2005, 12:07 PM

pm sent on water pump......Jerry

Alex Hayley · 02-08-2005, 12:24 PM

Can you tell me what gauge is third from the left in the cluster?

dallas71 · 02-08-2005, 12:40 PM

i can probably do that what days are yoiu there??? It woul have to be on the weekend though...

cheyenne10 · 02-08-2005, 01:19 PM

Put me down for 6 cyl intake.

email me shipping costs (zip 97401) and payment method. Paypal or Cashiers check.

thanks.

cheyennek20@comcast.net

teeitup · 02-08-2005, 02:09 PM

Kevin, I'll take the guage stuff, Thanks Randy

superchevy · 02-08-2005, 05:26 PM

Hi Kevin, I'll take the valvecovers for $50. PM shipping cost to me in Austin, 78738. Thanks, Casey.

Tx Firefighter · 02-08-2005, 07:55 PM

Dallas 71 has the power steering.
Cheyenne10 has the 6 cylinder intake manifold.
Randy has the guages.
Casey has the valve covers.
Bamm 24 is first in line on the water pump.

Tx Firefighter · 02-08-2005, 08:00 PM

By the way, if no one is in a bind to get it fast, I want to go to the shipping place and get everyone their shipping costs on Friday. I can send each of you the total via PM Friday when I find out.

67ChevyC10Stepside · 02-08-2005, 10:23 PM

we need the 12578 rpm story.......

71-longbed · 02-08-2005, 10:37 PM

Ditto .. need some details on that 12k rpm .... sounds fun

02-08-2005, 11:34 AM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Lots of parts for sale PLEASE RESPOND TO THIS POST RATHER THAN PM'S TO KEEP EVERYONE IN THE RIGHT ORDER AND NO FEELINGS GET HURT. I set of SBC Edelbrock valve covers. They're in fair shape. The hole around the oil filler cap had a chip out of it, so someone used some JB Weld to build it back up. You can't see it when the filler cap is in place. I'd rate them a 5 or 6 on 1-10 scale. They need polish and detail. Have been on my shop wall since the 80's. They're old. Sell for 50 bucks Last edited by Tx Firefighter; 02-08-2005 at 11:49 AM.

02-08-2005, 11:39 AM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Edelbrock valve cover breather. It bolts on, so you need to drill holes to install. I believe it's never been used. I have never seen another like it. 10 bucks. __________________ I'm on the Instagram- @Gearhead_Kevin

02-08-2005, 11:57 AM	#7
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	tx, will the p/s pump and hoses bolt up to the existing box??? __________________ My 1966 LWB Truck My 1966 SWB Truck

02-08-2005, 12:02 PM	#8
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	i'll take it then.....cheaper than converting from my existing long pump and pulleys to short pump and having to buy the pulleys....let me know how you want to get together.... __________________ My 1966 LWB Truck My 1966 SWB Truck

02-08-2005, 12:03 PM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Can you come to Hurst and pick it up at my fire station? __________________ I'm on the Instagram- @Gearhead_Kevin

02-08-2005, 11:37 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Small block power steering pump, brackets, pulley, and hoses. Off a late 70's 350 truck. Will fit any small block with accesory bolt holes. These are for long water pump setup. That means your alternator is on the passenger side of the engine. 35 bucks.

02-08-2005, 11:42 AM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Bunch of instrument cluster parts. Came out of who knows how many different trucks over the years. 20 bucks.

02-08-2005, 11:43 AM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Real nice restored 6 cylinder intake manifold. Has been bead blasted and POR15 engine painted. All threads are good and clean. No broke off bolt in the bottom like most have 20 bucks.

02-08-2005, 11:46 AM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Weiand aluminum SBC short water pump. It's fairly old. It came off of my sister's Camaro which was turning exactly 12,578 RPM when the rods exited the block back in 1990. Dirty and needs detailed. Short water pump means your alternator is on the driver's side of the engine. 15 bucks.

02-08-2005, 12:07 PM	#10
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	pm sent on water pump......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-08-2005, 12:24 PM	#11
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	Can you tell me what gauge is third from the left in the cluster?

02-08-2005, 12:40 PM	#12
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	i can probably do that what days are yoiu there??? It woul have to be on the weekend though... __________________ My 1966 LWB Truck My 1966 SWB Truck

02-08-2005, 01:19 PM	#13
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	I'll take 6 cyl intake. Put me down for 6 cyl intake. email me shipping costs (zip 97401) and payment method. Paypal or Cashiers check. thanks. cheyennek20@comcast.net __________________ Bob

02-08-2005, 02:09 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Kevin, I'll take the guage stuff, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-08-2005, 05:26 PM	#15
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Hi Kevin, I'll take the valvecovers for $50. PM shipping cost to me in Austin, 78738. Thanks, Casey. __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396



Register or Log In To remove these advertisements.

02-08-2005, 07:55 PM	#16
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Dallas 71 has the power steering. Cheyenne10 has the 6 cylinder intake manifold. Randy has the guages. Casey has the valve covers. Bamm 24 is first in line on the water pump. __________________ I'm on the Instagram- @Gearhead_Kevin

02-08-2005, 08:00 PM	#17
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	By the way, if no one is in a bind to get it fast, I want to go to the shipping place and get everyone their shipping costs on Friday. I can send each of you the total via PM Friday when I find out. __________________ I'm on the Instagram- @Gearhead_Kevin

02-08-2005, 10:23 PM	#18
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	we need the 12578 rpm story....... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

02-08-2005, 10:37 PM	#19
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	Ditto .. need some details on that 12k rpm .... sounds fun __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.

Register or Log In To remove these advertisements.