I need some V-8 engine towers... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Putter · 02-08-2005, 10:20 AM

Well, it finally happened. I bought almost every part that I need to convert my inline/manual to a V-8/automatic. (And I have used 100% board-member parts so far). I figured when the weather turned nice again, I would get busy swapping it over......Obviously, my truck has other plans.

The throw-out bearing has left the building, forcing me to park it. (And I don't want to replace it only to pull it all out in a few weeks.)

So I am using loaner-car from...who else????.....a BOARD MEMBER.....(board members are the best!!)

Anyway, the long & short of it is, my truck is forcing me to start the swap early and I need a set of V-8 engine towers (or stands, as I have also heard them called) for the forward position. As someone will surely suggest I just use the inline position, I want to move it forward because I have already purchased the correct drive shaft, etc....for the forward position.

Someone please help...

I need a pair of V-8 (forward position) engine towers as quick as I can get them.

Thanks in advance.....

Tx Firefighter · 02-08-2005, 11:28 AM

PM sent

Putter · 02-08-2005, 12:22 PM

PM returned....

jpony645 · 02-08-2005, 12:25 PM

I have a set for $35 plus shipping

mkmiller1 · 02-08-2005, 12:41 PM

Pm sent

teeitup · 02-08-2005, 01:59 PM

I got some too, mounts and rubber bushings

cadiac · 02-08-2005, 03:10 PM

I have a pair of small block perches [towers].$30/shipped -Steve

Putter · 02-08-2005, 04:21 PM

Thank You to everyone that replied. I have obtained a set from a board member, which keeps my parts at 100% board-supplied.

*bisquik65* · 02-08-2005, 08:41 PM

Man i would have give you a pair of them to help.... Anytime there putter.I must have 6 pair of them and 1 set are n.o.s. Glad to help with the auto crossmember and marker lites...Erick

Putter · 02-09-2005, 09:47 AM

Thanks for the offer Erick. I got a member to overnight me the pair so I can get back on the road. I have the lights installed, and will have the crossmember installed the first day we don't have rain. (Gotta remove the manual X-member first...PITA).

Joe67 · 02-09-2005, 11:15 AM

Here are SBC towers on ebay:
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7953313901

02-08-2005, 10:20 AM	#1
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	I need some V-8 engine towers... Well, it finally happened. I bought almost every part that I need to convert my inline/manual to a V-8/automatic. (And I have used 100% board-member parts so far). I figured when the weather turned nice again, I would get busy swapping it over......Obviously, my truck has other plans. The throw-out bearing has left the building, forcing me to park it. (And I don't want to replace it only to pull it all out in a few weeks.) So I am using loaner-car from...who else????.....a BOARD MEMBER.....(board members are the best!!) Anyway, the long & short of it is, my truck is forcing me to start the swap early and I need a set of V-8 engine towers (or stands, as I have also heard them called) for the forward position. As someone will surely suggest I just use the inline position, I want to move it forward because I have already purchased the correct drive shaft, etc....for the forward position. Someone please help... I need a pair of V-8 (forward position) engine towers as quick as I can get them. Thanks in advance..... __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

02-08-2005, 11:28 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	PM sent __________________ I'm on the Instagram- @Gearhead_Kevin

02-08-2005, 12:22 PM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	PM returned.... __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

02-08-2005, 12:41 PM	#5
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	Pm sent __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

02-08-2005, 01:59 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I got some too, mounts and rubber bushings __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-08-2005, 12:25 PM	#4
jpony645 Registered User Join Date: Nov 2003 Location: Birmingham, AL Posts: 163	I have a set for $35 plus shipping

02-08-2005, 03:10 PM	#7
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	I have a pair of small block perches [towers].$30/shipped -Steve

02-08-2005, 04:21 PM	#8
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Thank You to everyone that replied. I have obtained a set from a board member, which keeps my parts at 100% board-supplied. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

02-08-2005, 08:41 PM	#9
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Man i would have give you a pair of them to help.... Anytime there putter.I must have 6 pair of them and 1 set are n.o.s. Glad to help with the auto crossmember and marker lites...Erick

02-09-2005, 09:47 AM	#10
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Thanks for the offer Erick. I got a member to overnight me the pair so I can get back on the road. I have the lights installed, and will have the crossmember installed the first day we don't have rain. (Gotta remove the manual X-member first...PITA). __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

02-09-2005, 11:15 AM	#11
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Here are SBC towers on ebay: http://cgi.ebay.com/ebaymotors/ws/eB...tem=7953313901 __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.