Parting 69 and 72 trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

busterwivell · 02-09-2005, 10:30 PM

My friend just called tonight and said he got 2 new trucks in his salvage yard. Who wants what? I'll go look this weekend at what he has. Let me know and I'll make up a list.

suville · 02-09-2005, 10:46 PM

Id be interested in Good rust free inner fenders, especially rt. but will take a pair for my 68C10 project. Let me know what you come up with. The last pair I got from someone in AZ. and shipped Greyhound think it was around $40.Thanks.

c-1072 · 02-09-2005, 10:48 PM

Lookin for a good tilt if theres one for a decent price .

**Ironhorse** · 02-09-2005, 10:54 PM

I need a GOOD proportioning valve from a disc/drum set up for '71/'72 1/2 ton. See my earlier posting for a pic of the one I need. Bendix brand or style if that makes a difference?

Hotrodhenryj · 02-09-2005, 10:54 PM

Bill, There is a guy in Tucson who is looking for some GMC fenders and inners, but cant remember his handle, maybe he will see your post. Where is this yard located, maybe I can stop and brouse on my next trip to see my kid.

busterwivell · 02-09-2005, 11:07 PM

Chuck, you bought a 60 Chevy 2 door post from him a couple years ago at Pomona. Lat me know when you are coming to town, I'll hook you up (hes's closed on weekends; he's in my shop most of the time.

I know there are no tilts, I asked (for me).

olblue60@aol.com · 02-09-2005, 11:07 PM

Nice 69-70 Grille ?? Thanks

John

Putter · 02-10-2005, 11:49 AM

How about throttle linkage (rod) for a small block equiped truck. I am changing from inline to V-8 and my stock rod is too short.

**53burb** · 02-10-2005, 03:18 PM

I would be very interested in the rearend from either one. Find out the gears for me if you can please, or I can probably tell from which engine/tranny it came with. I am located in Queen Creek, so I can probably pick it up if you never come up this way...

Ptown72Chevy · 02-10-2005, 04:56 PM

Do you think the salvage yard would cut the roof off one??? If so let me know.. norcalchevy12@aol.com
Where in AZ is it?

meathead95 · 02-10-2005, 04:58 PM

if either is a bb i could use the brackets and pullies and ps pump

boraxman · 02-10-2005, 05:15 PM

Original AM/FM radio.

chipflyer · 02-10-2005, 05:25 PM

Keep me in mind on any original cruise control stuff if either are equipt.

1STtimePRo'71 · 02-10-2005, 07:56 PM

I'm also looking for a ps pump. But I'm in no hurry.

4tiresngas · 02-12-2005, 11:40 PM

If either has a stepside bed, I need the support brackets for the steps and the braces from the fenders. Thanks

Warrens69GMC · 02-13-2005, 12:12 AM

I am looking for fenders for our 69gmc and a passenger bedside. Thanks hotrodhenryj for remembering that I am still looking for these items.
warrens69gmc

70rs/ss · 02-13-2005, 01:20 AM

Is it Charlies' yard? I let him steal a 56 Chevy 2-door wagon from me a few years ago (long story). There are a couple of 67-72 trucks in a yard up here too, if anyone is interested I'll look here as well.

boraxman · 02-13-2005, 01:35 AM

Dude are you out there?

busterwivell · 02-13-2005, 10:19 AM

He will be here today, didn't get a chance to go yesterday, because we were working on his 56 Chevy all day. I've printed out all the requests and will show them to him and get responses back to you all ASAP.

TRUCKPOOR · 02-13-2005, 10:51 AM

I'm interested in a nice long bed, prefer something with original paint and no dents. Also need front bmper brkts for a 4x4 and a crossmember for 2wd automatic.

busterwivell · 02-14-2005, 08:46 AM

He has the list. He knows he has some of the stuff for sure, some he will check and let me know today. I'll get back to you all after he calls me.

busterwivell · 02-14-2005, 06:50 PM

OK, here's what he called back with:

Suville - inner fenders, $100.00 each, has both sides
c-1072 - tilt column, has a van tilt, $150.00
Ironhorse - doesn't know if proportioning valve is good or not.
olblue60 - only 69-70 grille has damage
Putter - throttle linkage with accel pedal to bolt to firewall $40.00
53burb - has 69 6 lug rear from a 350/350 truck, will pull cover to check if necessary
Ptown72 Chevy - will cut the roof, specify where you want it cut $150/200.00
Meathead95 - No big block brackets, pulleys or ps pump
Boraxman - no AM/FM radios
Chipflyer - no cruise control
1STtimePRo'71 - only have small block ps pumf for short waterpump with brackets $175
4tiresngas - no stepbeds
Warren's69GMC - front fenders $175.00 each, good bedside $150.00
70rs/ss - sounds like love/hate thing....3 speed column, no handle or linkage $125.00
TRUCKPOOR - nice longbed, needs a little work $250.00, no 4x4 stuff, 2wd crossmember $50.00
Hope this helps, let me know if you are interested.

**53burb** · 02-14-2005, 07:59 PM

If it came with an auto, it should be a 3.08. Could he pull the cover & check like you had mentioned?? Also, what is he asking for it??

**Ironhorse** · 02-14-2005, 08:28 PM

Is the proportioning valve a "Bendix", cast into the inboard or passenger side as it is mounted to the truck. Also has the numbers "0411" cast into same side. Can't see it until valve is pulled from truck. May take a chance on it if price is right. $$$ and shipping to 67152?

Bad Dog · 02-15-2005, 02:50 AM

I could be in the market for a solid bench seat no holes, or missing springs/lattice work.

02-09-2005, 10:30 PM	#1
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	Parting 69 and 72 trucks My friend just called tonight and said he got 2 new trucks in his salvage yard. Who wants what? I'll go look this weekend at what he has. Let me know and I'll make up a list. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

02-09-2005, 10:48 PM	#3
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	tilt colmn Lookin for a good tilt if theres one for a decent price .

02-09-2005, 10:54 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	I need a GOOD proportioning valve from a disc/drum set up for '71/'72 1/2 ton. See my earlier posting for a pic of the one I need. Bendix brand or style if that makes a difference? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-09-2005, 10:54 PM	#5
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Bill, There is a guy in Tucson who is looking for some GMC fenders and inners, but cant remember his handle, maybe he will see your post. Where is this yard located, maybe I can stop and brouse on my next trip to see my kid. __________________ Arizona rust free sheetmetal

02-09-2005, 11:07 PM	#6
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	Chuck, you bought a 60 Chevy 2 door post from him a couple years ago at Pomona. Lat me know when you are coming to town, I'll hook you up (hes's closed on weekends; he's in my shop most of the time. I know there are no tilts, I asked (for me). __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

02-09-2005, 10:46 PM	#2
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	Id be interested in Good rust free inner fenders, especially rt. but will take a pair for my 68C10 project. Let me know what you come up with. The last pair I got from someone in AZ. and shipped Greyhound think it was around $40.Thanks.

02-09-2005, 11:07 PM	#7
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Nice 69-70 Grille ?? Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

02-10-2005, 11:49 AM	#8
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	How about throttle linkage (rod) for a small block equiped truck. I am changing from inline to V-8 and my stock rod is too short. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

02-10-2005, 03:18 PM	#9
53burb Senior Member Join Date: May 2004 Location: Queen Creek, AZ Posts: 1,007	I would be very interested in the rearend from either one. Find out the gears for me if you can please, or I can probably tell from which engine/tranny it came with. I am located in Queen Creek, so I can probably pick it up if you never come up this way...

02-10-2005, 04:56 PM	#10
Ptown72Chevy Registered User Join Date: Feb 2004 Location: BAY AREA!! Posts: 44	Do you think the salvage yard would cut the roof off one??? If so let me know.. norcalchevy12@aol.com Where in AZ is it?

02-10-2005, 04:58 PM	#11
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	if either is a bb i could use the brackets and pullies and ps pump __________________ 72 2wd blazer 72 swb 4x4

02-10-2005, 05:15 PM	#12
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	Original AM/FM radio. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

02-10-2005, 05:25 PM	#13
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Keep me in mind on any original cruise control stuff if either are equipt. __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

02-10-2005, 07:56 PM	#14
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	I'm also looking for a ps pump. But I'm in no hurry. __________________ -Cory 1967 2 Wheel Chevy

02-12-2005, 11:40 PM	#15
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	If either has a stepside bed, I need the support brackets for the steps and the braces from the fenders. Thanks



Register or Log In To remove these advertisements.

02-13-2005, 12:12 AM	#16
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,612	gmc fenders - bedside I am looking for fenders for our 69gmc and a passenger bedside. Thanks hotrodhenryj for remembering that I am still looking for these items. warrens69gmc

02-13-2005, 01:20 AM	#17
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Is it Charlies' yard? I let him steal a 56 Chevy 2-door wagon from me a few years ago (long story). There are a couple of 67-72 trucks in a yard up here too, if anyone is interested I'll look here as well.

02-13-2005, 01:35 AM	#18
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	Dude are you out there? __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

02-13-2005, 10:19 AM	#19
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	He will be here today, didn't get a chance to go yesterday, because we were working on his 56 Chevy all day. I've printed out all the requests and will show them to him and get responses back to you all ASAP. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

02-13-2005, 10:51 AM	#20
TRUCKPOOR Registered User Join Date: Oct 2001 Location: Littleton, CO. USA Posts: 260	I'm interested in a nice long bed, prefer something with original paint and no dents. Also need front bmper brkts for a 4x4 and a crossmember for 2wd automatic.

02-14-2005, 08:46 AM	#21
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	He has the list. He knows he has some of the stuff for sure, some he will check and let me know today. I'll get back to you all after he calls me. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

02-14-2005, 06:50 PM	#22
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	OK, here's what he called back with: Suville - inner fenders, $100.00 each, has both sides c-1072 - tilt column, has a van tilt, $150.00 Ironhorse - doesn't know if proportioning valve is good or not. olblue60 - only 69-70 grille has damage Putter - throttle linkage with accel pedal to bolt to firewall $40.00 53burb - has 69 6 lug rear from a 350/350 truck, will pull cover to check if necessary Ptown72 Chevy - will cut the roof, specify where you want it cut $150/200.00 Meathead95 - No big block brackets, pulleys or ps pump Boraxman - no AM/FM radios Chipflyer - no cruise control 1STtimePRo'71 - only have small block ps pumf for short waterpump with brackets $175 4tiresngas - no stepbeds Warren's69GMC - front fenders $175.00 each, good bedside $150.00 70rs/ss - sounds like love/hate thing....3 speed column, no handle or linkage $125.00 TRUCKPOOR - nice longbed, needs a little work $250.00, no 4x4 stuff, 2wd crossmember $50.00 Hope this helps, let me know if you are interested. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

02-14-2005, 07:59 PM	#23
53burb Senior Member Join Date: May 2004 Location: Queen Creek, AZ Posts: 1,007	If it came with an auto, it should be a 3.08. Could he pull the cover & check like you had mentioned?? Also, what is he asking for it??

02-14-2005, 08:28 PM	#24
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Is the proportioning valve a "Bendix", cast into the inboard or passenger side as it is mounted to the truck. Also has the numbers "0411" cast into same side. Can't see it until valve is pulled from truck. May take a chance on it if price is right. $$$ and shipping to 67152? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-15-2005, 02:50 AM	#25
Bad Dog Registered User Join Date: Dec 2004 Posts: 48	I could be in the market for a solid bench seat no holes, or missing springs/lattice work.

Register or Log In To remove these advertisements.