WTB LOW HUMP floor tunnel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mac · 02-07-2005, 09:55 PM

Any one have a bolt-in low hump floor panel they wanna part with ? My truck has a 700R4 now and I want to be rid of the big hump. Thanx in advance.

Bob Moore · 02-07-2005, 10:19 PM

I don't think they made a bolt-in low hump tunnel cover. Usually the low hump is cut out and the high hump bolted in. You could get a floor section at the junk yard and cut and fit it to fit. Good luck.

junkyardjohn · 02-07-2005, 10:52 PM

Quote:

Originally Posted by Bob Moore

I don't think they made a bolt-in low hump tunnel cover. Usually the low hump is cut out and the high hump bolted in. You could get a floor section at the junk yard and cut and fit it to fit. Good luck.

BOBS 100% RIGHT. LOW HUMPS WERE PART OF THE FLOOR & HIGH HUMPS BOLTED IN.

JOHN

OneBad4x4 · 02-07-2005, 11:43 PM

odd, i have a 1970 gmc and it had a low hump, that bolted in, i just bought a high hump and it bolted in as well

junkyardjohn · 02-08-2005, 02:08 AM

Quote:

Originally Posted by OneBad4x4

odd, i have a 1970 gmc and it had a low hump, that bolted in, i just bought a high hump and it bolted in as well

WELL I'VE NEVER SEEN OR HEARD OF IT, ALTHOUGH THAT SURE DOESN'T MEEN THEY DON'T EXIST

. COULD THIS BE A MODIFICATION BY A P.O.? JOHN

**fine69** · 02-08-2005, 03:19 AM

I know where there is a large truck cab (2 ton) that has a low hump bolt in floor. I had to do a double take on it. I'll try to snag it when i go back to the yard.

Americanrider · 02-08-2005, 05:12 AM

MAC, PM sent I have what you need.

NPilot1975 · 02-08-2005, 08:48 AM

I am looking for the same thing. Just bought a high-hump rust free cab and don't need the high-hump. Truck is currently in IN, I am moving it to FL when I get back to the states in June. Thanx for any help.

Blue_71 · 02-08-2005, 09:08 AM

i have a low hump i was going to cut out of a cab and make into a bolt in, if anyone is interested in that... i plan to measure it with my high hump cab to put the bolt holes in the factory locations... (ps: this isnt something that could be ready in a short amount of time, i still have to cut it out and fix it up)

NPilot1975 · 02-08-2005, 09:46 AM

Blue 71, I may be interested in it. I am actually thinking of just welding the piece in instead of bolting. Although with the current set-up it would be easier to bolt one in.

72gord · 02-08-2005, 09:54 AM

Fine69...I could be wrong here, but I think those are shorter floor pans, the firewall on bigger trucks is set back farther than on pickups. Take a measurement to see for sure, then repost so we all know for sure.

OneBad4x4 · 02-10-2005, 10:39 PM

Quote:

Originally Posted by junkyardjohn

WELL I'VE NEVER SEEN OR HEARD OF IT, ALTHOUGH THAT SURE DOESN'T MEEN THEY DON'T EXIST

. COULD THIS BE A MODIFICATION BY A P.O.? JOHN

i may be wrong too, it could also be PO, but it looks factory?

02-07-2005, 09:55 PM	#1
mac Active Member Join Date: Jan 2005 Location: Spokane WA Posts: 166	WTB LOW HUMP floor tunnel Any one have a bolt-in low hump floor panel they wanna part with ? My truck has a 700R4 now and I want to be rid of the big hump. Thanx in advance.

02-07-2005, 10:19 PM	#2
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	low hump I don't think they made a bolt-in low hump tunnel cover. Usually the low hump is cut out and the high hump bolted in. You could get a floor section at the junk yard and cut and fit it to fit. Good luck. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

02-07-2005, 11:43 PM	#4
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	odd, i have a 1970 gmc and it had a low hump, that bolted in, i just bought a high hump and it bolted in as well __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

02-08-2005, 03:19 AM	#6
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	I know where there is a large truck cab (2 ton) that has a low hump bolt in floor. I had to do a double take on it. I'll try to snag it when i go back to the yard. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

02-08-2005, 08:48 AM	#8
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	I am looking for the same thing. Just bought a high-hump rust free cab and don't need the high-hump. Truck is currently in IN, I am moving it to FL when I get back to the states in June. Thanx for any help. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

02-08-2005, 05:12 AM	#7
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	MAC, PM sent I have what you need.

02-08-2005, 09:46 AM	#10
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Blue 71, I may be interested in it. I am actually thinking of just welding the piece in instead of bolting. Although with the current set-up it would be easier to bolt one in. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

02-08-2005, 09:54 AM	#11
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 602	Fine69...I could be wrong here, but I think those are shorter floor pans, the firewall on bigger trucks is set back farther than on pickups. Take a measurement to see for sure, then repost so we all know for sure.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.