YAY! Got my Airbag fittings! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TIMSPEED · 02-09-2005, 03:34 AM

Came in a small package, opened 'em up. WOW! I can't believe how easy those compression fittings are! As soon as my SD Brackets come in, it's gonna take me all of 10 minutes to get my airbags on, and be laying frame.

BTW: Rolf, how long did it take your brackets to come? It's been a week as of tommorow.

**N2TRUX** · 02-09-2005, 09:27 AM

Quote:

Originally Posted by TIMSPEED

...... it's gonna take me all of 10 minutes to get my airbags on, and be laying frame......

You mean laying A-arms?

Congrats on getting your parts. I still think you should pick up a tank and go ahead and route your lines to the tank.....

Izzy · 02-09-2005, 10:01 AM

It's gonna take longer than 10 minutes trust me. Don't forget you're gonna have to possibly raise your exhaust crossover.

Slonaker · 02-09-2005, 10:32 AM

Quote:

Originally Posted by fiveeightchevy

It's gonna take longer than 10 minutes trust me. Don't forget you're gonna have to possibly raise your exhaust crossover.

Maybe he meant that he would be "laying exhaust" after 10 minutes.

Slonaker

**N2TRUX** · 02-09-2005, 10:37 AM

Quote:

Originally Posted by Slonaker

Maybe he meant that he would be "laying exhaust" after 10 minutes.

LOHRTBT · 02-09-2005, 01:01 PM

There is just entirely too much laying going on in this thread!! haha

TIMSPEED · 02-09-2005, 01:11 PM

Quote:

Originally Posted by fiveeightchevy

It's gonna take longer than 10 minutes trust me. Don't forget you're gonna have to possibly raise your exhaust crossover.

What exhaust crossover? I have dual exhaust. I was joking about laying frame...for now...cuz I have long tube headers. Once I switch over to the 3/4 length's though, it'll be time to lay rocker!

r0lf- · 02-09-2005, 02:20 PM

Uhm... took me about 1 1/2 weeks or so. And you wont be laying rocker without a shortened xmember up front

Oh and you REALLY wont be laying frame without the rear going down too

Start saving up for that tank and compressor! How much were your fittings and where did you get em from. Im getting some new tools for my bday and prolly the fittings and tanks too. Then its solenoids and compressor and im set. Im gonna have Jason fab me up a custom Gauge/Switch panel that goes in the dash where the center vent is for the AC.

TIMSPEED · 02-09-2005, 02:52 PM

Quote:

Originally Posted by r0lf-

Uhm... took me about 1 1/2 weeks or so. And you wont be laying rocker without a shortened xmember up front Oh and you REALLY wont be laying frame without the rear going down too. How much were your fittings and where did you get em from.

Hmm, ok, so they should be here any day now. I know I won't be laying anything, I just like to BS with you guys. I got my hose/fittings from www.hosesandfittings.com. I paid $14 for 14' of 3/8" tube and 4 compression fittings, with $7 to ship the stuff.

redz 1970 K5 · 02-09-2005, 02:59 PM

Dude, all of this talk of bagging stuff really makes me want to get another truck to screw around with. I have been lifting trucks for 12 years now. I am really thinking about building a street truck soon. Probably a 94-98 Ext Cab SWB... No body drop, don't want to go that far, but laying frame would be sweet.

SanitysBane · 02-09-2005, 10:59 PM

It seems im the only on this thread that isn't layed...

phantom dually · 02-10-2005, 12:20 AM

Quote:

Originally Posted by Slonaker

Maybe he meant that he would be "laying exhaust" after 10 minutes.

Slonaker

Id be willing to bet the exhaust will be laying in the street after he catches the headers on something!!

alpha_male0203 · 02-10-2005, 12:22 AM

Hey i am stock here on both the 81 and 95. i plan to keep the 81 stock but the 95 i wanna raise it 3 in.

**N2TRUX** · 02-10-2005, 12:31 AM

Quote:

Originally Posted by SanitysBane

It seems im the only on this thread that isn't layed...

Better not stand still too long.... :bansex:

C-10volvo · 02-10-2005, 12:57 AM

Quote:

Originally Posted by N2TRUX

Better not stand still too long.... :bansex:

AWW KEN, MY EYES....

Izzy · 02-10-2005, 11:26 AM

Quote:

Originally Posted by TIMSPEED

What exhaust crossover? I have dual exhaust. I was joking about laying frame...for now...cuz I have long tube headers. Once I switch over to the 3/4 length's though, it'll be time to lay rocker!

I have a crossover pipe on my 83 so nevermind if you don't have it.

Ric83 · 02-11-2005, 11:04 AM

Quote:

Originally Posted by N2TRUX

Better not stand still too long.... :bansex:

ROFLMAO!

02-09-2005, 03:34 AM	#1
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	YAY! Got my Airbag fittings! Came in a small package, opened 'em up. WOW! I can't believe how easy those compression fittings are! As soon as my SD Brackets come in, it's gonna take me all of 10 minutes to get my airbags on, and be laying frame. BTW: Rolf, how long did it take your brackets to come? It's been a week as of tommorow. __________________ I have a few cars... See Them Here

02-09-2005, 01:01 PM	#6
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	There is just entirely too much laying going on in this thread!! haha __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

02-09-2005, 02:20 PM	#8
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	Uhm... took me about 1 1/2 weeks or so. And you wont be laying rocker without a shortened xmember up front Oh and you REALLY wont be laying frame without the rear going down too Start saving up for that tank and compressor! How much were your fittings and where did you get em from. Im getting some new tools for my bday and prolly the fittings and tanks too. Then its solenoids and compressor and im set. Im gonna have Jason fab me up a custom Gauge/Switch panel that goes in the dash where the center vent is for the AC. __________________ 1978 Money Pit - CUSTOM DELUXE!!!!

02-09-2005, 02:59 PM	#10
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	Dude, all of this talk of bagging stuff really makes me want to get another truck to screw around with. I have been lifting trucks for 12 years now. I am really thinking about building a street truck soon. Probably a 94-98 Ext Cab SWB... No body drop, don't want to go that far, but laying frame would be sweet. __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more

02-09-2005, 10:59 PM	#11
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	It seems im the only on this thread that isn't layed... __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

02-09-2005, 10:01 AM	#3
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	It's gonna take longer than 10 minutes trust me. Don't forget you're gonna have to possibly raise your exhaust crossover.

02-10-2005, 12:22 AM	#13
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	Hey i am stock here on both the 81 and 95. i plan to keep the 81 stock but the 95 i wanna raise it 3 in. __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.