Need a low hump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 02-09-2005, 03:11 PM

I need to change from a high hump in my 69 K20 to a low hump. I plan to just drill some holes and bolt in the low hump even though I understand the low humps were not bolt in's.

Does anyone have one cut out of a truck that is available? If so, let me know what your are asking for it.

I would prefer that it to be from an auto truck so I can put the shifter holes where I need them.

griesel72 · 02-09-2005, 05:27 PM

mark,

i cut one for just the opposite reason, i think i still have it, but i'll have to check to make sure i didn't throw it way cleaning up. You can have it if it is still out there (i can't see any reason i'll ever use it.

i'll let you know
David

Warbones · 02-09-2005, 05:33 PM

I'll be watching this thread as I wanna do this but the reverse.

meathead95 · 02-09-2005, 06:09 PM

if greisel doesnt have one i think i do you can have for shipping

**Yukon Jack** · 02-09-2005, 06:27 PM

Thanks to both of you for checking - hopefully one of you has one that is big enough to work. If you find yours, check the width measurement so I can make sure there is enough material to get it to bolt down.

**67sss** · 02-09-2005, 08:16 PM

I have this cab with the low hump still intacted. If for some reason the above doesn't work out, let me know the measurements and we'll cut it out for you.

**Yukon Jack** · 02-09-2005, 08:58 PM

Thanks

stelth2002 · 02-09-2005, 09:07 PM

67sss, if jack doesnt want that one and your cutting up the cab, let me know. Im looking also.

teeitup · 02-09-2005, 09:12 PM

Dang Mark, I just hauled off 2 cabs, I would of cut one out for you.

71cadc10 · 02-10-2005, 11:44 AM

I too have a cab that's going to for salvage, with low hump auto intact. If you're still in need I can cut out whatever you wish.

*Randy70C-10* · 02-10-2005, 01:32 PM

Damn, those cabs that you guys are junking look better than the one that I restored (before I restored it of course)

**Yukon Jack** · 02-10-2005, 04:10 PM

I will wait to see what Griesel72 finds as he is real close to me - hope to let you all know shortly.

Dano69c10 · 02-10-2005, 04:51 PM

Please don't scrap those cabs, someone somewhere needs them or parts of them!

meathead95 · 02-10-2005, 04:55 PM

mine will have to be welded in

**Yukon Jack** · 02-10-2005, 10:35 PM

meathead95 - thanks, I will pass on that one.

griesel72 · 02-10-2005, 11:02 PM

mark

I must have hauled it off with a load of scrap, as i can't find it anywhere. Sorry to get your hopes up.

David

Warbones · 02-11-2005, 12:18 AM

when bolting in the new hump...Does it need to be sealed afterwards?

shane's67 · 02-11-2005, 12:46 AM

Quote:

Originally Posted by 71cadc10

I too have a cab that's going to for salvage, with low hump auto intact. If you're still in need I can cut out whatever you wish.

are you getting rid of bed too email me if you are if this post is not old shanegarrett70@yahoo.com

shane's67 · 02-11-2005, 12:50 AM

Quote:

Originally Posted by Yukon Jack

I need to change from a high hump in my 69 K20 to a low hump. I plan to just drill some holes and bolt in the low hump even though I understand the low humps were not bolt in's.

Does anyone have one cut out of a truck that is available? If so, let me know what your are asking for it.

I would prefer that it to be from an auto truck so I can put the shifter holes where I need them.

i have a cut up cab but hump is good send some mesurements to shanegarrett70@yahoo.com

71cadc10 · 02-11-2005, 09:56 AM

shane's67
sorry keeping the bed, but the cab is going.

Yukon,
I can cut the hump out too, let me know and I'll send some pics and we can figure out where you want it cut.

**Yukon Jack** · 02-11-2005, 03:28 PM

Looks like Shane is closest and is able to get me one, so I should be taken care of. Anyone else is welcome to jump in on the other offers.

Warbones, the stock bolt in humps have a rope used as a gasket/seal between the floor and the hump.

02-09-2005, 03:11 PM	#1
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Need a low hump I need to change from a high hump in my 69 K20 to a low hump. I plan to just drill some holes and bolt in the low hump even though I understand the low humps were not bolt in's. Does anyone have one cut out of a truck that is available? If so, let me know what your are asking for it. I would prefer that it to be from an auto truck so I can put the shifter holes where I need them. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-09-2005, 05:27 PM	#2
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	mark, i cut one for just the opposite reason, i think i still have it, but i'll have to check to make sure i didn't throw it way cleaning up. You can have it if it is still out there (i can't see any reason i'll ever use it. i'll let you know David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

02-09-2005, 05:33 PM	#3
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	I'll be watching this thread as I wanna do this but the reverse. __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

02-09-2005, 06:09 PM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	if greisel doesnt have one i think i do you can have for shipping __________________ 72 2wd blazer 72 swb 4x4

02-09-2005, 06:27 PM	#5
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Thanks to both of you for checking - hopefully one of you has one that is big enough to work. If you find yours, check the width measurement so I can make sure there is enough material to get it to bolt down. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-09-2005, 08:16 PM	#6
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	hump I have this cab with the low hump still intacted. If for some reason the above doesn't work out, let me know the measurements and we'll cut it out for you. Attached Images

02-09-2005, 08:58 PM	#7
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Thanks __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-09-2005, 09:07 PM	#8
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	67sss, if jack doesnt want that one and your cutting up the cab, let me know. Im looking also. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

02-09-2005, 09:12 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Dang Mark, I just hauled off 2 cabs, I would of cut one out for you. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-10-2005, 11:44 AM	#10
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	I too have a cab that's going to for salvage, with low hump auto intact. If you're still in need I can cut out whatever you wish. Attached Images __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear

02-10-2005, 01:32 PM	#11
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Damn, those cabs that you guys are junking look better than the one that I restored (before I restored it of course)

02-10-2005, 04:10 PM	#12
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	I will wait to see what Griesel72 finds as he is real close to me - hope to let you all know shortly. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-10-2005, 04:51 PM	#13
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Please don't scrap those cabs, someone somewhere needs them or parts of them! __________________ '69 Fleet It ain't yours, if you didn't build it!

02-10-2005, 04:55 PM	#14
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	mine will have to be welded in __________________ 72 2wd blazer 72 swb 4x4

02-10-2005, 10:35 PM	#15
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	meathead95 - thanks, I will pass on that one. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14



Register or Log In To remove these advertisements.

02-10-2005, 11:02 PM	#16
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	mark I must have hauled it off with a load of scrap, as i can't find it anywhere. Sorry to get your hopes up. David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

02-11-2005, 12:18 AM	#17
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	when bolting in the new hump...Does it need to be sealed afterwards? __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

02-11-2005, 09:56 AM	#20
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	shane's67 sorry keeping the bed, but the cab is going. Yukon, I can cut the hump out too, let me know and I'll send some pics and we can figure out where you want it cut. __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear

02-11-2005, 03:28 PM	#21
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Looks like Shane is closest and is able to get me one, so I should be taken care of. Anyone else is welcome to jump in on the other offers. Warbones, the stock bolt in humps have a rope used as a gasket/seal between the floor and the hump. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

Register or Log In To remove these advertisements.