Parts for Sale (DFW Area) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69ChevySWB · 01-18-2005, 05:38 PM

All of these parts are off of a 69 Chevy 1/2 Ton.

Pics

AC Cab - Needs Rockers and floor work. No VIN/Title. Pictures show as tank and rearview mirror. Both have been removed. Seatbelts will stay (Blue). $150.00

SWB Bed - Passenger Bedside only part that may be repairable. Has a lot of pitting. $25.00

Glovebox Door - $10.00

Spare tire mounting parts - Has pitting. $15.00

Front Spindles - I have two sets. One set is missing parts. The other is complete. $10.00 for set missing parts and $20.00 for the other.

Brake/Clutch Assembly - $15.00

E-Brake Assembly - $5.00

Hood Hinges - $5.00

Drivers Side Green Visor - $5.00

Green Arm Rest - $10.00

2 Hoods - Hood 1 is $10.00 and Hood 2 is $25.00

Steel Bumper - $15.00

Upper and Lower Control Arms - I have only finished cleaning the upper. The lowers will look the same when sold. They are wire brush cleaned, sprayed with rust-oleum heavy rusted metal primer and foam brush painted with rust-oleum oil-based black gloss. $75.00 for all four (SOLD)

73-87 Engine Mounts - Same cleaning and paint as the control arms. $20.00

6 Lug coil rear end - Not sure of ratio. I tried using the FAQ of spinning the wheel once and count the driveshaft turns. The yoke spun 2 times for each 1 wheel revolution. $25.00

I will ship the smaller items but would rather not ship the larger.

David Johnson · 01-18-2005, 06:06 PM

You have a PM about the SWB

69ChevySWB · 01-18-2005, 06:15 PM

I also have a LWB frame that has been stripped. $25.00 if interested.

69ChevySWB · 01-20-2005, 12:11 AM

Anyone????? I will also take resonable offers.

I have also have a non-tilt auto column and a set of front coils.

mcubedntx · 01-23-2005, 02:30 AM

2low72 · 01-23-2005, 04:04 PM

Interested in the control arms. how far are you from ft. worth and could you send pics to calebs02@cox.net

69ChevySWB · 01-23-2005, 06:16 PM

Responded to PM and sent e-mail.

69ChevySWB · 01-27-2005, 04:50 PM

Ttt

69ChevySWB · 02-11-2005, 05:15 PM

Trying one more time

bagged69c10 · 02-11-2005, 07:53 PM

I take it that the frame has even been stripped of the front crossmember.?

69ChevySWB · 02-11-2005, 08:18 PM

bagged69, I sent you a PM

01-18-2005, 05:38 PM	#1
69ChevySWB Registered User Join Date: Apr 2002 Location: Little Elm, Texas, USA Posts: 237	Parts for Sale (DFW Area) All of these parts are off of a 69 Chevy 1/2 Ton. Pics AC Cab - Needs Rockers and floor work. No VIN/Title. Pictures show as tank and rearview mirror. Both have been removed. Seatbelts will stay (Blue). $150.00 SWB Bed - Passenger Bedside only part that may be repairable. Has a lot of pitting. $25.00 Glovebox Door - $10.00 Spare tire mounting parts - Has pitting. $15.00 Front Spindles - I have two sets. One set is missing parts. The other is complete. $10.00 for set missing parts and $20.00 for the other. Brake/Clutch Assembly - $15.00 E-Brake Assembly - $5.00 Hood Hinges - $5.00 Drivers Side Green Visor - $5.00 Green Arm Rest - $10.00 2 Hoods - Hood 1 is $10.00 and Hood 2 is $25.00 Steel Bumper - $15.00 Upper and Lower Control Arms - I have only finished cleaning the upper. The lowers will look the same when sold. They are wire brush cleaned, sprayed with rust-oleum heavy rusted metal primer and foam brush painted with rust-oleum oil-based black gloss. $75.00 for all four (SOLD) 73-87 Engine Mounts - Same cleaning and paint as the control arms. $20.00 6 Lug coil rear end - Not sure of ratio. I tried using the FAQ of spinning the wheel once and count the driveshaft turns. The yoke spun 2 times for each 1 wheel revolution. $25.00 I will ship the smaller items but would rather not ship the larger. __________________ Brian Thompson 99 2500 Silverado 6.0 05 Suburban (Wife's) 67 Mustang (Wife's) Last edited by 69ChevySWB; 01-27-2005 at 04:49 PM. Reason: Mark item as sold

01-18-2005, 06:15 PM	#3
69ChevySWB Registered User Join Date: Apr 2002 Location: Little Elm, Texas, USA Posts: 237	I also have a LWB frame that has been stripped. $25.00 if interested. __________________ Brian Thompson 99 2500 Silverado 6.0 05 Suburban (Wife's) 67 Mustang (Wife's)

01-20-2005, 12:11 AM	#4
69ChevySWB Registered User Join Date: Apr 2002 Location: Little Elm, Texas, USA Posts: 237	Anyone????? I will also take resonable offers. I have also have a non-tilt auto column and a set of front coils. __________________ Brian Thompson 99 2500 Silverado 6.0 05 Suburban (Wife's) 67 Mustang (Wife's)

01-23-2005, 02:30 AM	#5
mcubedntx Registered User Join Date: Sep 2002 Location: West Texas Posts: 54	PM Sent __________________ Just a NOVICE who thinks this is the BEST board on the WEB!!

01-23-2005, 04:04 PM	#6
2low72 Registered User Join Date: Mar 2004 Location: Cheyenne, Wy Posts: 555	Interested in the control arms. how far are you from ft. worth and could you send pics to calebs02@cox.net __________________ 2014 GMC Yukon XL (Wifey's) 2004 Chevy Silverado Crew Cab Z71

01-18-2005, 06:06 PM	#2
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	You have a PM about the SWB

01-23-2005, 06:16 PM	#7
69ChevySWB Registered User Join Date: Apr 2002 Location: Little Elm, Texas, USA Posts: 237	Responded to PM and sent e-mail. __________________ Brian Thompson 99 2500 Silverado 6.0 05 Suburban (Wife's) 67 Mustang (Wife's)

01-27-2005, 04:50 PM	#8
69ChevySWB Registered User Join Date: Apr 2002 Location: Little Elm, Texas, USA Posts: 237	Ttt __________________ Brian Thompson 99 2500 Silverado 6.0 05 Suburban (Wife's) 67 Mustang (Wife's)

02-11-2005, 05:15 PM	#9
69ChevySWB Registered User Join Date: Apr 2002 Location: Little Elm, Texas, USA Posts: 237	Trying one more time __________________ Brian Thompson 99 2500 Silverado 6.0 05 Suburban (Wife's) 67 Mustang (Wife's)

02-11-2005, 07:53 PM	#10
bagged69c10 soon to be bagged64sub Join Date: Feb 2005 Location: DFW-currently phoenix Posts: 635	I take it that the frame has even been stripped of the front crossmember.? __________________ 1969 c-10, bagged, Zd, 20" Boyds SOLD! 1964 Suburban COMING SOON Build threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=304726 1965 c-10 long bed 1993 Sierra x-cab 1999 tahoe-4/5 on 22s 2005 Chevy work truck

02-11-2005, 08:18 PM	#11
69ChevySWB Registered User Join Date: Apr 2002 Location: Little Elm, Texas, USA Posts: 237	bagged69, I sent you a PM __________________ Brian Thompson 99 2500 Silverado 6.0 05 Suburban (Wife's) 67 Mustang (Wife's)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.