72 4x4 parts blazer for sale!!!!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLAZERMAN · 01-11-2005, 07:11 PM

These are the brackets they are wanting.

teeitup · 01-11-2005, 07:12 PM

Mark, it will be the weekend, I'm not sure the name
Bruce, its yours

I think what they are talking about are the deal in teh middle of the rear panels, you put a screw into them and hold the panel out and straight. You can see them in the one pic from the rear. Thanks Randy

teeitup · 01-11-2005, 07:13 PM

Good call Rob!!!!!

thekidd · 01-11-2005, 07:18 PM

yes those are what we are wanting.Rare i dunno bu tmy blazer doesn't have any so I thought I might get some if some became available.

teeitup · 01-14-2005, 11:31 PM

I'm 90% sure the tub and running gear are sold, I still have the individual parts that I listed for sale at the top of the thread. I'll try to get out there this weekend to get the parts off it but no guarantees, around 10 degrees all weekend here. Thanks Randy

Super Duck · 01-15-2005, 01:05 AM

If you still have it how much for the tank and sending unit

c-1072 · 01-15-2005, 09:45 AM

I can here you there about how cold it is ! still interested in these parts . i am patient so take your time and try to get back to me with cond and price .

chucks70 · 01-16-2005, 09:23 PM

You don't happen to have one of the 4X4 dipsticks that curve around toward the front of the engine do you?

teeitup · 01-16-2005, 09:34 PM

Super Duck, sorry its going with the blazer
Chucks70, sorry none right now
Thanks Randy

Chevy Muscle · 01-17-2005, 01:24 PM

I'm still interested in the Rear End if it's a 3.07 or 3.73 posi 12-bolt.

Has the snow melted enough to check?

teeitup · 01-17-2005, 02:21 PM

Blazer is traded off!!! I have the parts listed separate above for sale. Still got 3/4 inch of ice on everything around here, should be off by the weekend hopefully. Thanks Randy

**bobvilla67** · 02-08-2005, 03:04 PM

hey guys,i have the blazer now.I will be keeping the windshield frame,engine,trans,t-case and differentials and will be gettting rid of the rest.let me know if anyone needs parts from it.thanks,Bobby

meathead95 · 02-08-2005, 04:20 PM

how is the bed floor around the wheel tubs?

thekidd · 02-08-2005, 05:32 PM

Did you end up with the pieces that hold the rear panels on? Ones pictured above. If so I am still interested.

**bobvilla67** · 02-09-2005, 09:59 PM

the bed floor is not in bad shape,it has some rust near the tailgate but around the wheelwells it is good.

chucks70 · 02-09-2005, 11:48 PM

I would be interested in the inside of the quarter panels that are around the wheelhouses if they are in good shape. Also, possibly the floor support that would be under the tailgate if both body mounts on it are in good shape.

**bobvilla67** · 02-10-2005, 03:17 PM

chucks70: I will check on the inner quarter panel and floor mount

thekidd:I did not get those pieces.

meathead95 · 02-10-2005, 04:53 PM

i need like a 12" perimeter of the bed floor cut out around each wheel tub.as long as it is RUST FREE are you willing to do that? if so how much? can you ship greyhound?

**bobvilla67** · 02-12-2005, 09:30 PM

I will get pics on Mon of the specific areas.thanks

01-11-2005, 07:11 PM	#26
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	These are the brackets they are wanting. Attached Images

01-11-2005, 07:12 PM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Mark, it will be the weekend, I'm not sure the name Bruce, its yours I think what they are talking about are the deal in teh middle of the rear panels, you put a screw into them and hold the panel out and straight. You can see them in the one pic from the rear. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-11-2005, 07:13 PM	#28
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Good call Rob!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-11-2005, 07:18 PM	#29
thekidd Registered User Join Date: Oct 2004 Location: Piedmont of North Carolina Posts: 196	yes those are what we are wanting.Rare i dunno bu tmy blazer doesn't have any so I thought I might get some if some became available. __________________ thekidd 95 Silverado 2000 Suburban 4x4 91 Nissan 4x4 65 Impala SS (Mom and Dads now mine) 1971 K5 Blazer(Father and son project) 1972 2WD Blazer

01-14-2005, 11:31 PM	#30
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I'm 90% sure the tub and running gear are sold, I still have the individual parts that I listed for sale at the top of the thread. I'll try to get out there this weekend to get the parts off it but no guarantees, around 10 degrees all weekend here. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-15-2005, 01:05 AM	#31
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	If you still have it how much for the tank and sending unit __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

01-15-2005, 09:45 AM	#32
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	rocker boxes rear floor I can here you there about how cold it is ! still interested in these parts . i am patient so take your time and try to get back to me with cond and price .

01-16-2005, 09:23 PM	#33
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	You don't happen to have one of the 4X4 dipsticks that curve around toward the front of the engine do you? __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.

01-16-2005, 09:34 PM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Super Duck, sorry its going with the blazer Chucks70, sorry none right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-17-2005, 01:24 PM	#35
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 293	I'm still interested in the Rear End if it's a 3.07 or 3.73 posi 12-bolt. Has the snow melted enough to check?

01-17-2005, 02:21 PM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Blazer is traded off!!! I have the parts listed separate above for sale. Still got 3/4 inch of ice on everything around here, should be off by the weekend hopefully. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-08-2005, 03:04 PM	#37
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	hey guys,i have the blazer now.I will be keeping the windshield frame,engine,trans,t-case and differentials and will be gettting rid of the rest.let me know if anyone needs parts from it.thanks,Bobby __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

02-08-2005, 04:20 PM	#38
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	how is the bed floor around the wheel tubs? __________________ 72 2wd blazer 72 swb 4x4

02-08-2005, 05:32 PM	#39
thekidd Registered User Join Date: Oct 2004 Location: Piedmont of North Carolina Posts: 196	Did you end up with the pieces that hold the rear panels on? Ones pictured above. If so I am still interested. __________________ thekidd 95 Silverado 2000 Suburban 4x4 91 Nissan 4x4 65 Impala SS (Mom and Dads now mine) 1971 K5 Blazer(Father and son project) 1972 2WD Blazer

02-09-2005, 09:59 PM	#40
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	the bed floor is not in bad shape,it has some rust near the tailgate but around the wheelwells it is good. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350



Register or Log In To remove these advertisements.

02-09-2005, 11:48 PM	#41
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	I would be interested in the inside of the quarter panels that are around the wheelhouses if they are in good shape. Also, possibly the floor support that would be under the tailgate if both body mounts on it are in good shape. __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.

02-10-2005, 03:17 PM	#42
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	chucks70: I will check on the inner quarter panel and floor mount thekidd:I did not get those pieces. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

02-10-2005, 04:53 PM	#43
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	i need like a 12" perimeter of the bed floor cut out around each wheel tub.as long as it is RUST FREE are you willing to do that? if so how much? can you ship greyhound? __________________ 72 2wd blazer 72 swb 4x4

02-12-2005, 09:30 PM	#44
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	I will get pics on Mon of the specific areas.thanks __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

Register or Log In To remove these advertisements.