choke thermostat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nelson · 03-24-2004, 12:31 AM

Hi Guys, and Gals. I looking for a Choke Thermostat (new or used) for my stock intake, and Quadrajet. Do you know where I can find one. I checked the dealership, and it's not available. I checked net too, but with international shipping changes, it makes that small part expensive. thanks

celcius232 · 03-24-2004, 01:09 AM

The coil si still avaialble aftermarket here in teh states--I got mine from the local NAPA parts store. I found the housing and the rod in teh wrecking yard form a 1970 Impala. I think GM used these well into the 70s. Good luck--eh. Brian.

**GSFMECH** · 03-24-2004, 01:19 AM

Yep , Nelson is right, I have bought them at Car Quest also. If all else fails Classic industries, OPG, The Paddock, NPD etc. all carry them for the most popular styles used, last time I looked the "kit" was about 20 bucks,
Mike

*Gee_Emm* · 03-24-2004, 11:12 AM

Try this part number at auto value stores if you have them there. Might work at other stores too.

CU75 2-312

Stepsides 4Ever · 03-24-2004, 06:35 PM

Carbs.net has an electric choke conversion kit...a bit pricey at $60...

http://www.carbs.net/quadrajet.asp

nu2-72 · 03-24-2004, 10:04 PM

Car Quest #CV 75 for the choke thermostat.
Choke rod and housing are still available from several sources.

Nelson · 03-24-2004, 11:38 PM

Wow, thanks for all the replies guys!

skahide · 02-12-2005, 12:46 AM

Hate to bring this thread back to life but i am in need of the housing and linkage for my carb. I FINALLY found the coil but i cannot find the housing or linkage. Somehow the PO rigged it up to run without the choke thermostat or the choke pulloff. WHERE DO I FIND THE HOUSING OR LINKAGE???

jostrans68 · 02-12-2005, 12:58 AM

search on ebay a guy has them on there good luck

nu2-72 · 02-12-2005, 02:19 AM

Check Ecklers Corvettes. The Rochester 4 BBL is a very common and model common carb. The Corvettes are restored very heavily and so have a very high # of restoration parts. The intake and carb don't know the diferrence between Corvette and truck. I bought several of my truck parts there. Choke cover and rod included.

4x4Poet · 02-12-2005, 03:16 AM

nu2-72, that Ecklers Corvettes site is great. They have three pages of choke parts listing GM year & engine applications and showing corresponding pics. Thanks.
Page 1
Page 2
Page 3

Nelson · 02-14-2005, 09:32 PM

I found a choke at Car Quest! It wasn't this exact one, but I "made it work". Even had to creat my own rod, because OEM wasn't going to work!
Also did some search on the net one day, and seen one for a 69 Camaro that look like the exact one that I need. It was very pricey

chevy69er · 02-14-2005, 09:55 PM

Im running a edelbrock performer intake and avs offroad carb..my stock choke thermostat wont work with this combo.What have ya'll used to make your choke work properly.Thanks.

03-24-2004, 12:31 AM	#1
Nelson Registered User Join Date: Jun 2001 Location: cambridge,ont,canada Posts: 128	choke thermostat Hi Guys, and Gals. I looking for a Choke Thermostat (new or used) for my stock intake, and Quadrajet. Do you know where I can find one. I checked the dealership, and it's not available. I checked net too, but with international shipping changes, it makes that small part expensive. thanks __________________ Nelson 1970 C10 350 Auto. A/C not Working

03-24-2004, 10:04 PM	#6
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Car Quest #CV 75 for the choke thermostat. Choke rod and housing are still available from several sources. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

03-24-2004, 11:38 PM	#7
Nelson Registered User Join Date: Jun 2001 Location: cambridge,ont,canada Posts: 128	Wow, thanks for all the replies guys! __________________ Nelson 1970 C10 350 Auto. A/C not Working

02-12-2005, 12:58 AM	#9
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	search on ebay a guy has them on there good luck __________________ [CGTW Member former 67-72 now with a 96 silverado

02-12-2005, 02:19 AM	#10
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Check Ecklers Corvettes. The Rochester 4 BBL is a very common and model common carb. The Corvettes are restored very heavily and so have a very high # of restoration parts. The intake and carb don't know the diferrence between Corvette and truck. I bought several of my truck parts there. Choke cover and rod included. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

03-24-2004, 01:09 AM	#2
celcius232 Registered User Join Date: Feb 2004 Location: Helena, Montana Posts: 67	The coil si still avaialble aftermarket here in teh states--I got mine from the local NAPA parts store. I found the housing and the rod in teh wrecking yard form a 1970 Impala. I think GM used these well into the 70s. Good luck--eh. Brian.

03-24-2004, 01:19 AM	#3
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Yep , Nelson is right, I have bought them at Car Quest also. If all else fails Classic industries, OPG, The Paddock, NPD etc. all carry them for the most popular styles used, last time I looked the "kit" was about 20 bucks, Mike

03-24-2004, 11:12 AM	#4
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Try this part number at auto value stores if you have them there. Might work at other stores too. CU75 2-312

03-24-2004, 06:35 PM	#5
Stepsides 4Ever Stepsides Are Bedder Join Date: Feb 2004 Location: Norco, CA Posts: 238	Carbs.net has an electric choke conversion kit...a bit pricey at $60... http://www.carbs.net/quadrajet.asp

02-12-2005, 12:46 AM	#8
skahide Looking @ 67 Chevy Short Step Join Date: Jul 2004 Location: Near Tyler, Texas Posts: 136	Hate to bring this thread back to life but i am in need of the housing and linkage for my carb. I FINALLY found the coil but i cannot find the housing or linkage. Somehow the PO rigged it up to run without the choke thermostat or the choke pulloff. WHERE DO I FIND THE HOUSING OR LINKAGE???

02-12-2005, 03:16 AM	#11
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	nu2-72, that Ecklers Corvettes site is great. They have three pages of choke parts listing GM year & engine applications and showing corresponding pics. Thanks. Page 1 Page 2 Page 3 __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup. Last edited by 4x4Poet; 02-12-2005 at 03:23 AM.

02-14-2005, 09:32 PM	#12
Nelson Registered User Join Date: Jun 2001 Location: cambridge,ont,canada Posts: 128	I found a choke at Car Quest! It wasn't this exact one, but I "made it work". Even had to creat my own rod, because OEM wasn't going to work! Also did some search on the net one day, and seen one for a 69 Camaro that look like the exact one that I need. It was very pricey __________________ Nelson 1970 C10 350 Auto. A/C not Working

02-14-2005, 09:55 PM	#13
chevy69er Registered User Join Date: Feb 2003 Location: Lakewood,Ca Posts: 69	Im running a edelbrock performer intake and avs offroad carb..my stock choke thermostat wont work with this combo.What have ya'll used to make your choke work properly.Thanks. __________________ 1969 C-20,383 stroker,sm465,custom long travel front suspension,4 wheel disc brakes,35" pro comps...mods under way include: 4x4 conversion,and custom bumpers.future mods include: gear vendors od unit,and relocation of fuel cell.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.