72 4WD Manifolds Wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pickupman · 02-18-2005, 11:49 AM

Looking for a very nice set of 72 4wd Manifolds for my restoration project. Must be in good condition and off of a 72 4WD. They are the straight down center dump ramhorns. No smog holes.

Thanks,Bill

barraza · 02-18-2005, 12:04 PM

I don't have any for sale, but my 72 4wd didn't come with straight down center dump manifolds. They are rams horns, but they angle rearward on both sides. Original untouched 350 / T350 / np205, when I got it 20 years ago. Are you sure you need straight down exits?

teeitup · 02-18-2005, 01:53 PM

Bill, I have one for sure, I'll look for others when I go out there, Thanks Randy

pickupman · 02-18-2005, 04:36 PM

Barraza--Never run across a 4wd that was original and had the angles on them.

Teeitup--Thanks, let me know. Would you mind getting the # off them and a picture if possible.

Thanks, Bill

Burnsman · 02-18-2005, 05:11 PM

Bill, I still have a pair on a 72 blazer 350 in the garage. I'll need to check condition. I'll try to get some pics tonight. Brian

pickupman · 02-18-2005, 05:23 PM

Sounds good, thanks brian

Bill

meathead95 · 02-18-2005, 05:50 PM

i have a pair for 100 plus the ride

barraza · 02-18-2005, 06:55 PM

OK, now I am confused. Does everyone elses 72 4wd have straight down exits on their manifolds?

I put headers on this truck soon after I got it, but when I came to my senses and replaced them, I thought I put back the manifolds I took off. I have a pile of manifolds in the barn including a set straight dump rams horns. Where did I get the ones on my truck

The older I get, the more encounters I have with the dreaded C.R.S. (can't remember s**t)

**69-z28** · 02-18-2005, 07:41 PM

I have had at least 20 69-72 chevy and GMC 4x4's and they all had straight
center dumps

Burnsman · 02-18-2005, 09:50 PM

Bill, here's some pics. Let me know if you need any more. If you're interested, I can take them off and get some better pics. It was just too cold out there right now to tear them off! 10 degrees here. Anyways, if you want them $65 to your door. Brian

teeitup · 02-18-2005, 11:10 PM

Bill, I only have one, the other straight dump I have has the hole to mount the alt on. Sorry, Thanks Randy

pickupman · 02-19-2005, 12:22 AM

Thank Guys. I think I may have located a set.

TRUCKPOOR · 02-19-2005, 01:03 PM

Burnsman, If pickupman doesn't take them and they're still available please send me a PM. I posted awhile back for a set and I still need them. Thanks, Rob

02-18-2005, 11:49 AM	#1
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	72 4WD Manifolds Wanted Looking for a very nice set of 72 4wd Manifolds for my restoration project. Must be in good condition and off of a 72 4WD. They are the straight down center dump ramhorns. No smog holes. Thanks,Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

02-18-2005, 01:53 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Bill, I have one for sure, I'll look for others when I go out there, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-18-2005, 04:36 PM	#4
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Barraza--Never run across a 4wd that was original and had the angles on them. Teeitup--Thanks, let me know. Would you mind getting the # off them and a picture if possible. Thanks, Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

02-18-2005, 05:11 PM	#5
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	manifolds Bill, I still have a pair on a 72 blazer 350 in the garage. I'll need to check condition. I'll try to get some pics tonight. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

02-18-2005, 05:23 PM	#6
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Sounds good, thanks brian Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

02-18-2005, 12:04 PM	#2
barraza Registered User Join Date: Jul 2003 Location: N. Alabama Posts: 131	I don't have any for sale, but my 72 4wd didn't come with straight down center dump manifolds. They are rams horns, but they angle rearward on both sides. Original untouched 350 / T350 / np205, when I got it 20 years ago. Are you sure you need straight down exits?

02-18-2005, 05:50 PM	#7
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	i have a pair for 100 plus the ride __________________ 72 2wd blazer 72 swb 4x4

02-18-2005, 06:55 PM	#8
barraza Registered User Join Date: Jul 2003 Location: N. Alabama Posts: 131	OK, now I am confused. Does everyone elses 72 4wd have straight down exits on their manifolds? I put headers on this truck soon after I got it, but when I came to my senses and replaced them, I thought I put back the manifolds I took off. I have a pile of manifolds in the barn including a set straight dump rams horns. Where did I get the ones on my truck The older I get, the more encounters I have with the dreaded C.R.S. (can't remember s**t)

02-18-2005, 07:41 PM	#9
69-z28 Registered User Join Date: Feb 2001 Location: Rochester ny usa Posts: 244	I have had at least 20 69-72 chevy and GMC 4x4's and they all had straight center dumps

02-18-2005, 09:50 PM	#10
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Manifolds Bill, here's some pics. Let me know if you need any more. If you're interested, I can take them off and get some better pics. It was just too cold out there right now to tear them off! 10 degrees here. Anyways, if you want them $65 to your door. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

02-18-2005, 11:10 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Bill, I only have one, the other straight dump I have has the hole to mount the alt on. Sorry, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-19-2005, 12:22 AM	#12
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Thank Guys. I think I may have located a set. __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

02-19-2005, 01:03 PM	#13
TRUCKPOOR Registered User Join Date: Oct 2001 Location: Littleton, CO. USA Posts: 260	Burnsman, If pickupman doesn't take them and they're still available please send me a PM. I posted awhile back for a set and I still need them. Thanks, Rob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.