FS: 67 GMC small window truck & misc stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

glock35ipsc · 02-01-2005, 04:10 PM

NEW PRICE, $750 FOR ALL OF THIS!!!!!!

I need to move some stuff to make room for current projects. I basically have everything I need for my 68 set aside, so all of my “extras” that I have accumulated need to go. I want to sell all this as one lot, I would rather not separate this.

Here it is:

* 1967 GMC ½ ton 2wd. Small back window cab. Rust in the usual places. Box is in bad shape, has no engine or trans in it (although one engine and 2 transmissions are included), and it needs a different rear end installed (included). Originally had a 350 V6 and an automatic. I hold the clear Colorado title to the truck.

* 327 small block, 4 bbl Q-Jet, low miles. Runs fantastic, but had a rod knocking after it warms up. Probably just needs the crank turned, and a new set of bearings.

* 3-speed manual trans out of my 68. Flywheel, clutch, all linkages, column, and pedals etc.

* TH-350 builder, complete.

* 6-lug, 12 bolt rear end, 3.73 open diff. New brakes, new drums, new brake cylinders.

Various other parts to be thrown in the deal:

* Pair of trailing arms
* 2 LWB drive shafts, 2 piece (one has new u-joint and carrier bearing, less than 200 miles use)
* 2 disc brake front ends
* Auto trans crossmember
* Non-tilt auto trans steering column
* Pair of rams horn manifolds (I think they exit straight down)
* Complete dual exhaust for above manifolds for LWB truck: 2.25" mandrel bent aluminized tubing, turbos, “H” pipe, long tips that exit straight back. Has less than 200 miles on it.
* Misc frame brackets

I am asking $750 for all of the above. You can pick up at my place just northeast of Fort Collins, Colorado. I hope to have some pictures up within a couple days.

Send me a PM if you are interested.

Thanks!
Bob

glock35ipsc · 02-02-2005, 09:00 AM

btt

GenIIIShorty · 02-02-2005, 12:41 PM

any pics of the truck?

glock35ipsc · 02-02-2005, 02:32 PM

I'm gonna try to get some posted this weekend, maybe even tonight if I get home before it gets dark.

Otherwise, I have a funeral to attend in the morning, then I am having Lasik eye surgery tomorrow afternoon, so I might not be able to do them until Saturday.

Hotrodhenryj · 02-02-2005, 02:49 PM

Bob, any chance you have the fender emblems from the V-6, says 351 Magnum Power. I need one or pair for my 67. Thanks, Chuck

glock35ipsc · 02-02-2005, 05:08 PM

Sorry Chuck, all the emblems are gone.

glock35ipsc · 02-04-2005, 02:09 PM

GenIIIShorty -

I snapped some pics this morning, I will upload them to my photo host and post them here when I get home this evening.

glock35ipsc · 02-04-2005, 09:04 PM

OK, here are the pics:

GenIIIShorty · 02-04-2005, 09:14 PM

definately an old farm truck!

glock35ipsc · 02-04-2005, 10:48 PM

Yeah, she sure is!

Offers anyone?????? I want this stuff gone.......

GenIIIShorty · 02-04-2005, 10:50 PM

maybe i can get my dad to buy it for me as a christmas/birthday present! j/k.

glock35ipsc · 02-04-2005, 11:21 PM

Well, go give ol' pop a nudge!

GenIIIShorty · 02-04-2005, 11:40 PM

i'm seriously considering it........he's only down in CO springs, so he can pick it up for me, too.

glock35ipsc · 02-05-2005, 12:49 AM

I'm about a 2 hour drive, maybe 2.5 hours north of Colo Springs

Any other parts that I can round up that I won't be using, I'll throw in as well..... I know I have a dash cluster (speedo and fuel gauge only type), misc interior parts, and I'm sure some other stuff.

glock35ipsc · 02-06-2005, 06:05 PM

btt

glock35ipsc · 02-26-2005, 02:31 PM

New price, $750 takes all of this stuff!!

Bob Moore · 02-26-2005, 03:39 PM

What condition is the tailgate??? Rust and/or dents? How about shipping by Greyhound?

Think about it - Bob

glock35ipsc · 02-26-2005, 05:55 PM

The tailgate is pretty rough. I want to sell this stuff all as one lot also, so I don't think Greyhound will have room for the truck

02-01-2005, 04:10 PM	#1
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	FS: 67 GMC small window truck & misc stuff *NEW PRICE, $750 FOR ALL OF THIS!!!!!!* I need to move some stuff to make room for current projects. I basically have everything I need for my 68 set aside, so all of my “extras” that I have accumulated need to go. I want to sell all this as one lot, I would rather not separate this. Here it is: * 1967 GMC ½ ton 2wd. Small back window cab. Rust in the usual places. Box is in bad shape, has no engine or trans in it (although one engine and 2 transmissions are included), and it needs a different rear end installed (included). Originally had a 350 V6 and an automatic. I hold the clear Colorado title to the truck. * 327 small block, 4 bbl Q-Jet, low miles. Runs fantastic, but had a rod knocking after it warms up. Probably just needs the crank turned, and a new set of bearings. * 3-speed manual trans out of my 68. Flywheel, clutch, all linkages, column, and pedals etc. * TH-350 builder, complete. * 6-lug, 12 bolt rear end, 3.73 open diff. New brakes, new drums, new brake cylinders. Various other parts to be thrown in the deal: * Pair of trailing arms * 2 LWB drive shafts, 2 piece (one has new u-joint and carrier bearing, less than 200 miles use) * 2 disc brake front ends * Auto trans crossmember * Non-tilt auto trans steering column * Pair of rams horn manifolds (I think they exit straight down) * Complete dual exhaust for above manifolds for LWB truck: 2.25" mandrel bent aluminized tubing, turbos, “H” pipe, long tips that exit straight back. Has less than 200 miles on it. * Misc frame brackets I am asking $750 for all of the above. You can pick up at my place just northeast of Fort Collins, Colorado. I hope to have some pictures up within a couple days. Send me a PM if you are interested. Thanks! Bob __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 02-26-2005 at 02:30 PM.

02-02-2005, 09:00 AM	#2
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	btt __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-02-2005, 12:41 PM	#3
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	any pics of the truck? __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

02-02-2005, 02:32 PM	#4
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	I'm gonna try to get some posted this weekend, maybe even tonight if I get home before it gets dark. Otherwise, I have a funeral to attend in the morning, then I am having Lasik eye surgery tomorrow afternoon, so I might not be able to do them until Saturday. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-02-2005, 02:49 PM	#5
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Bob, any chance you have the fender emblems from the V-6, says 351 Magnum Power. I need one or pair for my 67. Thanks, Chuck __________________ Arizona rust free sheetmetal

02-02-2005, 05:08 PM	#6
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Sorry Chuck, all the emblems are gone. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-04-2005, 02:09 PM	#7
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	GenIIIShorty - I snapped some pics this morning, I will upload them to my photo host and post them here when I get home this evening. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-04-2005, 09:04 PM	#8
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	OK, here are the pics: __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-04-2005, 09:14 PM	#9
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	definately an old farm truck! __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

02-04-2005, 10:48 PM	#10
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Yeah, she sure is! Offers anyone?????? I want this stuff gone....... __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-04-2005, 10:50 PM	#11
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	maybe i can get my dad to buy it for me as a christmas/birthday present! j/k. __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

02-04-2005, 11:21 PM	#12
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Well, go give ol' pop a nudge! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-04-2005, 11:40 PM	#13
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	i'm seriously considering it........he's only down in CO springs, so he can pick it up for me, too. __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

02-05-2005, 12:49 AM	#14
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	I'm about a 2 hour drive, maybe 2.5 hours north of Colo Springs Any other parts that I can round up that I won't be using, I'll throw in as well..... I know I have a dash cluster (speedo and fuel gauge only type), misc interior parts, and I'm sure some other stuff. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-06-2005, 06:05 PM	#15
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	btt __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE



Register or Log In To remove these advertisements.

02-26-2005, 02:31 PM	#16
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	New price, $750 takes all of this stuff!! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-26-2005, 03:39 PM	#17
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	What condition is the tailgate??? Rust and/or dents? How about shipping by Greyhound? Think about it - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

02-26-2005, 05:55 PM	#18
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	The tailgate is pretty rough. I want to sell this stuff all as one lot also, so I don't think Greyhound will have room for the truck __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

Register or Log In To remove these advertisements.