Bed Patch Panels For Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stelth2002 · 12-20-2004, 08:17 PM

Ok, I have a pretty striaght bed that im cutting up. its a Long wheel base. I also have a couple tailgates to cut. I cant ship HUGE pieces of this. But if you have a gas door you want to cover or some damage you can patch over. Here ya go. Its primer gray. Show me what you want and ill post a shipping and price. Right now the area right behind the rear tires is already taken. Thanks JT

Huskerboy2 · 12-20-2004, 08:21 PM

PM sent

ricecop425 · 12-20-2004, 09:46 PM

i need to fill my saddle tanks doors can you cut me something out to fill em?

ricecop425 · 12-20-2004, 09:47 PM

and how much for a full tailgate?

spencra · 12-20-2004, 10:42 PM

Do you have a decent straight lower inner bottom of a fleet tailgate. Preferably all the way across and up to the lower rib.

If you have to cut it in half for shipping that would be fine.

Thanks,
Larry

Budweis · 12-21-2004, 01:27 AM

how much you wanting for a 6-8" wide strip of the bed floor all the way across the width of the bed?

GMC Jim · 12-21-2004, 06:30 AM

I could use a piece of bed floor.... front right hand corner ( pass. side)... of the bed...
about 12 wide... across the width of the bed X 6 inces deep..... shipping to 97233??????????

Litdave · 12-21-2004, 01:07 PM

I could use the outside drivers side lower half from in front of the tire.

Let me know how much.

stelth2002 · 12-21-2004, 02:20 PM

A message has been sent to everyone wanting something. Thanks and let me know if there is anything else you want. JT

Brad · 12-21-2004, 09:52 PM

GMC Jim, I noticed you're in my zip code! I've never seen your truck around- what gives? You must live right around the corner from me. Let's talk sometime-Brad

stelth2002 · 12-22-2004, 01:24 AM

Ricecop, i have the patches you need and Pm'd you. Let me know.... anyone else needing anything?

spencra · 12-22-2004, 10:35 AM

Hey stelth2002, if it wasn't for the shipping cost I would buy the skin. I'll have to pass for now.

Thanks,
Larry

stelth2002 · 01-23-2005, 09:44 PM

Everyone I have one pair of gas tank patches left. They are ready to go!!!

**D.PASSMORE** · 01-23-2005, 10:10 PM

I need as much of the rear sill area as you can spare. this the area where the bed floor ends and any thing in front the right fender housing. Let me know if you can do or need pictures or other info. Thanks

stelth2002 · 01-24-2005, 09:14 PM

Passmore, why dont you give me a picture of what your after.

metalmile@gmail.com

Anyone else need anything?

Thanks JT

**D.PASSMORE** · 01-24-2005, 10:27 PM

It will have to be this week end when i'm back at the house. I'm in MIAMI all this week. Yeah, it cold down here too!

stelth2002 · 02-23-2005, 10:40 PM

I still have one pair of gas patch panels left. If anyones interested let me know.

Thanks JT

RON WOODGEARD · 02-24-2005, 12:46 AM

I still need the piece I PM'd you about if you have another bed.....

stelth2002 · 02-24-2005, 11:41 PM

Ron, you are still on my list when i get a another bed. THis is the last of what i have of this one. Anyone?

Huskerboy2 · 02-26-2005, 04:27 PM

What is left of the bed. I'm looking for some of the rear on both sides and I'm looking for the area right around the driver's side fender opening, toward the front.

stelth2002 · 02-26-2005, 05:41 PM

Huskerboy2, you have a PM

454_72_4X4 · 02-26-2005, 06:59 PM

Do you have any of the under floor supports in good shape?

12-20-2004, 08:17 PM	#1
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Bed Patch Panels For Sale Ok, I have a pretty striaght bed that im cutting up. its a Long wheel base. I also have a couple tailgates to cut. I cant ship HUGE pieces of this. But if you have a gas door you want to cover or some damage you can patch over. Here ya go. Its primer gray. Show me what you want and ill post a shipping and price. Right now the area right behind the rear tires is already taken. Thanks JT __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

12-20-2004, 08:21 PM	#2
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	PM sent __________________ '72 Chevy Blazer

12-20-2004, 09:46 PM	#3
ricecop425 carl Join Date: Nov 2004 Location: seattle Posts: 190	i need to fill my saddle tanks doors can you cut me something out to fill em? __________________ a man and his truck, such a beautiful thing

12-20-2004, 09:47 PM	#4
ricecop425 carl Join Date: Nov 2004 Location: seattle Posts: 190	and how much for a full tailgate? __________________ a man and his truck, such a beautiful thing

12-20-2004, 10:42 PM	#5
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Do you have a decent straight lower inner bottom of a fleet tailgate. Preferably all the way across and up to the lower rib. If you have to cut it in half for shipping that would be fine. Thanks, Larry __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

12-21-2004, 01:27 AM	#6
Budweis Geared for Collision Join Date: Jan 2004 Location: St. Louis, Mo. Posts: 683	how much you wanting for a 6-8" wide strip of the bed floor all the way across the width of the bed? __________________ MEMBER OF THE 4 WHEEL DISK BRAKE CLUB 1970 C/K20 3/4 Ton 1996 Collectors Edition Corvette 1977 Corvette Coupe

12-21-2004, 06:30 AM	#7
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	I could use a piece of bed floor.... front right hand corner ( pass. side)... of the bed... about 12 wide... across the width of the bed X 6 inces deep..... shipping to 97233?????????? __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

12-21-2004, 01:07 PM	#8
Litdave Registered User Join Date: Feb 2002 Location: Tullahoma, TN Posts: 203	I could use the outside drivers side lower half from in front of the tire. Let me know how much. __________________ 71 Factory SWB 4x4 Project 383/350/205 69 LWB 2wd CST Daily Driver ZZ4/700r4/3.73 72 SWB Future Hot Rod

12-21-2004, 02:20 PM	#9
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	A message has been sent to everyone wanting something. Thanks and let me know if there is anything else you want. JT __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

12-21-2004, 09:52 PM	#10
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	GMC Jim, I noticed you're in my zip code! I've never seen your truck around- what gives? You must live right around the corner from me. Let's talk sometime-Brad __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

12-22-2004, 01:24 AM	#11
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Ricecop, i have the patches you need and Pm'd you. Let me know.... anyone else needing anything? __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

12-22-2004, 10:35 AM	#12
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Hey stelth2002, if it wasn't for the shipping cost I would buy the skin. I'll have to pass for now. Thanks, Larry __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-23-2005, 09:44 PM	#13
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Everyone I have one pair of gas tank patches left. They are ready to go!!! __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

01-23-2005, 10:10 PM	#14
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	I need as much of the rear sill area as you can spare. this the area where the bed floor ends and any thing in front the right fender housing. Let me know if you can do or need pictures or other info. Thanks

01-24-2005, 09:14 PM	#15
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Passmore, why dont you give me a picture of what your after. metalmile@gmail.com Anyone else need anything? Thanks JT __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!



Register or Log In To remove these advertisements.

01-24-2005, 10:27 PM	#16
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Pictures It will have to be this week end when i'm back at the house. I'm in MIAMI all this week. Yeah, it cold down here too!

02-23-2005, 10:40 PM	#17
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I still have one pair of gas patch panels left. If anyones interested let me know. Thanks JT __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

02-24-2005, 12:46 AM	#18
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	I still need the piece I PM'd you about if you have another bed.....

02-24-2005, 11:41 PM	#19
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Ron, you are still on my list when i get a another bed. THis is the last of what i have of this one. Anyone? __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

02-26-2005, 04:27 PM	#20
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	What is left of the bed. I'm looking for some of the rear on both sides and I'm looking for the area right around the driver's side fender opening, toward the front. __________________ '72 Chevy Blazer

02-26-2005, 05:41 PM	#21
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Huskerboy2, you have a PM __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

02-26-2005, 06:59 PM	#22
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Do you have any of the under floor supports in good shape? __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

Register or Log In To remove these advertisements.