Outlaw II 15x10 Clearance ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69 Short Fleet · 02-28-2005, 10:37 PM

Does anyone know if I'll have clearance problems with Outlaw II, 15" X 10" with 4" backspacing on my 69 c/10 leafspring stock rear end, stock suspension? I'm concerned about them clearing the inside or back of the inner fender, thanks Doug

Brainchild · 02-28-2005, 11:05 PM

I don't know what the spacing is on these,I can measure it tomorrow if needed.They do fit fine though.They may only be 8's,didn't measure them.31x10.50s mounted on them.
Tha back are wider than the fronts though

1971ChevyTruck · 02-28-2005, 11:11 PM

I'm pretty sure they will fit...

69 Short Fleet · 02-28-2005, 11:46 PM

I'd like to run a 50 series tire on them (rear) from what I checked on ARE's website all the 15 X 10" Outlaw I (the 15" X 10" 6 bolt Outlaw II is discontinued) have 4" BS in a 6 bolt aplication, I'm not into big fat slicks or a prostreet style tire but just a 50 series with a nice profile. I'm not sure if a 60's size would fit on a 10". My biggest concern is the sidewall rubbing on the inside against the inner fender.

Brainchild · 02-28-2005, 11:50 PM

These wheels had 275 60x15 ,on them when I took them off the other truck,not low profiles.I don't think you'll have a problem with clearance.

02-28-2005, 10:37 PM	#1
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Outlaw II 15x10 Clearance ? Does anyone know if I'll have clearance problems with Outlaw II, 15" X 10" with 4" backspacing on my 69 c/10 leafspring stock rear end, stock suspension? I'm concerned about them clearing the inside or back of the inner fender, thanks Doug

02-28-2005, 11:05 PM	#2
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	I don't know what the spacing is on these,I can measure it tomorrow if needed.They do fit fine though.They may only be 8's,didn't measure them.31x10.50s mounted on them. Tha back are wider than the fronts though __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

02-28-2005, 11:50 PM	#5
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	These wheels had 275 60x15 ,on them when I took them off the other truck,not low profiles.I don't think you'll have a problem with clearance. __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

02-28-2005, 11:11 PM	#3
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	I'm pretty sure they will fit...

02-28-2005, 11:46 PM	#4
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	I'd like to run a 50 series tire on them (rear) from what I checked on ARE's website all the 15 X 10" Outlaw I (the 15" X 10" 6 bolt Outlaw II is discontinued) have 4" BS in a 6 bolt aplication, I'm not into big fat slicks or a prostreet style tire but just a 50 series with a nice profile. I'm not sure if a 60's size would fit on a 10". My biggest concern is the sidewall rubbing on the inside against the inner fender.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.