69 C10 Pickup...Maybe??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wxman1 · 07-20-2002, 08:18 AM

I bought this truck about 6 weeks ago. I'm finding more and
more about the truck as I work on it. However...I'm sure you
guys can ID this truck much better than I can. I'm posting some
pix as links (sorry I dont have 200 posts yet). Take a look at the
pix and tell me what model this. Data plate says its a 69. However when I went to replace a power steering hose,
the 69 hose from Orielly's wouldn't fit...a 72 model hose would!

This is the truck side view

http://mywebpages.comcast.net/wxgeek/trk_side.JPG

This is a closer view of the side

http://mywebpages.comcast.net/wxgeek...ide_closer.jpg

This is the front

http://mywebpages.comcast.net/wxgeek/trk_frnt.JPG

this is the rear

http://mywebpages.comcast.net/wxgeek/trk_rear.JPG

this is the data plate

http://mywebpages.comcast.net/wxgeek/trk_id_plate.JPG

For what its worth...the engine is a 350CID from an 84/85
El Camino.

Jim M.

**GMCPaul** · 07-20-2002, 08:39 AM

The 68-72 power steering pressure line on all small block V-8s were the same. The picture links all show a 1969 SWB fleetside and the data plate confirms this also. A adapter is used for connection at pump if pump has a female fitting on it rather than male.
GMCPaul

71402BB · 07-20-2002, 08:46 AM

Looks like a 69 or 70 to me............

LeRoy · 07-20-2002, 11:01 AM

Scott70Chevy · 07-20-2002, 02:00 PM

Not unusual for O-Reily's or Autozone to have the wrong part number look-up for older vehicles. I've even had trouble with simple things on newer vehicles like radiator hoses on my '90 model import! Sometimes just have to take the part in and have them match it up.

Longhorn Man · 07-20-2002, 05:11 PM

Looks like a very good starting point, and looks 10 times better than the BroncoII that is is sitting by.

Being that that truck has been redone at least once, (at least the body was) you'll probably find all kinds of 'not quite right' parts.
But who cares? It's still a cool rig.

**PICKMUP** · 07-20-2002, 07:12 PM

It's a short fleetside...get rid of that thing! You can't haul anything in those little beds...worthless...send it to me for immediate disposal. lol. Love them shorties.

lukecp · 07-20-2002, 07:58 PM

Pretty nice little truck you have there

. BTW, you have front fenders off a 71-72 P/U, the 8/350 emblem is under the marker light.

Longhorn Man · 07-20-2002, 08:30 PM

Good catch there yellow, the 69/70 has the engine badge under the chassis designation...like this;

woodrow59 · 07-20-2002, 09:30 PM

what's the hood from???????? May be petty,,,,but there's no holes for the Bowtie.

lukecp · 07-20-2002, 09:43 PM

If there aren't any holes for the bowtie, it is proably a 71-72 hood. Sounds like the truck has a 71-71 front clip. It really dosen't matter, the only differences are the holes were the engine badge goes, and the holes for the bowtie. If you really wanna correct it, just drill new holes and fill the old ones in.

JHickson6 · 07-20-2002, 09:54 PM

According to http://www.americanclassic.com/paint.htm

Vin Decoding Results

VIN CE149F896266
Model Year 1969
Chassis 2 Wheel Drive
Body Style (unknown code)
GVWR Range 3600-5600
Cab-To-Axle Dimension
Engine 8-Cylinder
Assembly Plant Flint, MI
Sequential Number 896266

woodrow59 · 07-20-2002, 09:59 PM

Sorry Y'all,,,,,,,,I've been trying to pick this truck apart but it don't matter,,,,,,,,,,,,,,,,,,,,,that truck is a Chevy and it looks twice as good as mine!!!!!!

07-20-2002, 08:18 AM	#1
wxman1 Senior Member Join Date: May 2002 Location: mt juliet, tennessee, usa Posts: 237	69 C10 Pickup...Maybe??? I bought this truck about 6 weeks ago. I'm finding more and more about the truck as I work on it. However...I'm sure you guys can ID this truck much better than I can. I'm posting some pix as links (sorry I dont have 200 posts yet). Take a look at the pix and tell me what model this. Data plate says its a 69. However when I went to replace a power steering hose, the 69 hose from Orielly's wouldn't fit...a 72 model hose would! This is the truck side view http://mywebpages.comcast.net/wxgeek/trk_side.JPG This is a closer view of the side http://mywebpages.comcast.net/wxgeek...ide_closer.jpg This is the front http://mywebpages.comcast.net/wxgeek/trk_frnt.JPG this is the rear http://mywebpages.comcast.net/wxgeek/trk_rear.JPG this is the data plate http://mywebpages.comcast.net/wxgeek/trk_id_plate.JPG For what its worth...the engine is a 350CID from an 84/85 El Camino. Jim M.

07-20-2002, 08:39 AM	#2
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,721	The 68-72 power steering pressure line on all small block V-8s were the same. The picture links all show a 1969 SWB fleetside and the data plate confirms this also. A adapter is used for connection at pump if pump has a female fitting on it rather than male. GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

07-20-2002, 08:46 AM	#3
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	Looks like a 69 or 70 to me............ __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

07-20-2002, 11:01 AM	#4
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	__________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

07-20-2002, 02:00 PM	#5
Scott70Chevy Registered User Join Date: Jan 2001 Location: Waxahachie, TX, USA Posts: 114	Not unusual for O-Reily's or Autozone to have the wrong part number look-up for older vehicles. I've even had trouble with simple things on newer vehicles like radiator hoses on my '90 model import! Sometimes just have to take the part in and have them match it up. __________________ Scott70Chevy '70 CST: LWB, Fleetside, black ext., black/gray int., 350-4bbl, 3-speed, 12 bolt 3.07, deep dish rallye wheels, NO RUST!

07-20-2002, 05:11 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Looks like a very good starting point, and looks 10 times better than the BroncoII that is is sitting by. Being that that truck has been redone at least once, (at least the body was) you'll probably find all kinds of 'not quite right' parts. But who cares? It's still a cool rig.

07-20-2002, 07:12 PM	#7
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	It's a short fleetside...get rid of that thing! You can't haul anything in those little beds...worthless...send it to me for immediate disposal. lol. Love them shorties. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

07-20-2002, 07:58 PM	#8
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Pretty nice little truck you have there . BTW, you have front fenders off a 71-72 P/U, the 8/350 emblem is under the marker light. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

07-20-2002, 08:30 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Good catch there yellow, the 69/70 has the engine badge under the chassis designation...like this; Attached Images

07-20-2002, 09:30 PM	#10
woodrow59 OzarkHillbilly in Atlanta Join Date: May 2002 Location: Douglasville, Ga. Salem, Mo. Posts: 386	what's the hood from???????? May be petty,,,,but there's no holes for the Bowtie. __________________ 72 custom/10 LWB 68 Longhorn C20 Custom Camper (sold)

07-20-2002, 09:43 PM	#11
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	If there aren't any holes for the bowtie, it is proably a 71-72 hood. Sounds like the truck has a 71-71 front clip. It really dosen't matter, the only differences are the holes were the engine badge goes, and the holes for the bowtie. If you really wanna correct it, just drill new holes and fill the old ones in. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

07-20-2002, 09:54 PM	#12
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	1969 According to http://www.americanclassic.com/paint.htm Vin Decoding Results VIN CE149F896266 Model Year 1969 Chassis 2 Wheel Drive Body Style (unknown code) GVWR Range 3600-5600 Cab-To-Axle Dimension Engine 8-Cylinder Assembly Plant Flint, MI Sequential Number 896266 __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

07-20-2002, 09:59 PM	#13
woodrow59 OzarkHillbilly in Atlanta Join Date: May 2002 Location: Douglasville, Ga. Salem, Mo. Posts: 386	Sorry Y'all,,,,,,,,I've been trying to pick this truck apart but it don't matter,,,,,,,,,,,,,,,,,,,,,that truck is a Chevy and it looks twice as good as mine!!!!!! __________________ 72 custom/10 LWB 68 Longhorn C20 Custom Camper (sold)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.