PART#wheel cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevman-67 · 03-04-2005, 06:14 PM

Here is a part # I can not find or cross reference FC-34142 it is a wheel cylinder made by wagner lockheed usa.maye someon can help me out.

Gator70 · 03-06-2005, 02:15 AM

chevman, are you looking for one of those wheel cylinders?? If so what is the appl.

chevman-67 · 03-06-2005, 12:34 PM

This is off a 1 ton dually gmc 1969 w/v-8 I have replaced it but I could not cross reference this part # and the 1 I installed is fine but not an exact match and was wondering if wagner still made these or or they all aftermarket now.I paid $125 .for the 1 I replaced and if I ever need to do this again might be able to find 1 cheaper if I had a cross on the old part #.

Gator70 · 03-07-2005, 12:22 PM

Well chevman, I looked through the Wagner catalouge and could not produce that number, it didnt appear in the superceded #'s. or in the price list.
The numbers that I found for that were different.

The fronts 1 1/8 bore are F34333/F34334
The rears w/HO72 1 1/4 bore F9344/F9345
The rears wH110 1 1/2 bore upper F57851 lower F57850
These are all Wagner part no's
Hope this helps a little bit.
If you get the casting no of the old cyl that might help to get the newer replacement

chevman-67 · 03-07-2005, 04:40 PM

Thanx I do know its a 1 1/4" bore the #s I have are off the rubber end caps off the cylinder ill try and get 1 off the cyl, itself .Thanx again.

Gator70 · 03-08-2005, 12:01 PM

The dust boot(end cap) numbers are not individual to each cylinder. If you know the bores are 11/4 then the F9344/9345 are the cyl you need. I can double check from the casting no of the original cylinder as well.

03-04-2005, 06:14 PM	#1
chevman-67 Registered User Join Date: Jul 2004 Location: quebec canada Posts: 135	PART#wheel cylinder Here is a part # I can not find or cross reference FC-34142 it is a wheel cylinder made by wagner lockheed usa.maye someon can help me out. __________________ gm's are #1 1967 chevrolet short step 1988 chev 4x4 1/2 ton 1989 gmc 1/2 ton 1991 chev 1/2 ton 4x4 1993 Jeep grand cherokee 4x4 And yes a 94 Ford Mustang.

03-06-2005, 02:15 AM	#2
Gator70 Registered User Join Date: Oct 2004 Location: Turner Valley, Alberta Posts: 91	chevman, are you looking for one of those wheel cylinders?? If so what is the appl. __________________ 1970 GMC K15 - Canadian built 2nd Owner truck 68k miles 2014 Denali 1500 6.2L

03-06-2005, 12:34 PM	#3
chevman-67 Registered User Join Date: Jul 2004 Location: quebec canada Posts: 135	This is off a 1 ton dually gmc 1969 w/v-8 I have replaced it but I could not cross reference this part # and the 1 I installed is fine but not an exact match and was wondering if wagner still made these or or they all aftermarket now.I paid $125 .for the 1 I replaced and if I ever need to do this again might be able to find 1 cheaper if I had a cross on the old part #. __________________ gm's are #1 1967 chevrolet short step 1988 chev 4x4 1/2 ton 1989 gmc 1/2 ton 1991 chev 1/2 ton 4x4 1993 Jeep grand cherokee 4x4 And yes a 94 Ford Mustang.

03-07-2005, 12:22 PM	#4
Gator70 Registered User Join Date: Oct 2004 Location: Turner Valley, Alberta Posts: 91	Well chevman, I looked through the Wagner catalouge and could not produce that number, it didnt appear in the superceded #'s. or in the price list. The numbers that I found for that were different. The fronts 1 1/8 bore are F34333/F34334 The rears w/HO72 1 1/4 bore F9344/F9345 The rears wH110 1 1/2 bore upper F57851 lower F57850 These are all Wagner part no's Hope this helps a little bit. If you get the casting no of the old cyl that might help to get the newer replacement __________________ 1970 GMC K15 - Canadian built 2nd Owner truck 68k miles 2014 Denali 1500 6.2L

03-07-2005, 04:40 PM	#5
chevman-67 Registered User Join Date: Jul 2004 Location: quebec canada Posts: 135	Thanx I do know its a 1 1/4" bore the #s I have are off the rubber end caps off the cylinder ill try and get 1 off the cyl, itself .Thanx again. __________________ gm's are #1 1967 chevrolet short step 1988 chev 4x4 1/2 ton 1989 gmc 1/2 ton 1991 chev 1/2 ton 4x4 1993 Jeep grand cherokee 4x4 And yes a 94 Ford Mustang.

03-08-2005, 12:01 PM	#6
Gator70 Registered User Join Date: Oct 2004 Location: Turner Valley, Alberta Posts: 91	The dust boot(end cap) numbers are not individual to each cylinder. If you know the bores are 11/4 then the F9344/9345 are the cyl you need. I can double check from the casting no of the original cylinder as well. __________________ 1970 GMC K15 - Canadian built 2nd Owner truck 68k miles 2014 Denali 1500 6.2L



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.