late model steering wheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jetfixr · 03-10-2005, 01:37 PM

My stock wheel was pretty thrashed so I ordered one from a 94 silverado off of ebay. There is a spacer/horn contact peice that seems to make the wheel stick out a bit farther then it should, also can't figure out how to mate the new horn cap wiring with this spacer/horn contact peice. I know this has been posted somewhere before, but with the search function down it is burried somewhere in 1241 pages =(

70c10 · 03-10-2005, 01:40 PM

Hopefully Longhorn Man sees this. He uses that wheel alot and probably has some insight.

72 Cheyenne402 · 03-10-2005, 02:47 PM

I Have The Same Problem

**john** · 03-10-2005, 03:23 PM

There is some horn info here

flip66 · 03-10-2005, 03:28 PM

you can get the horn peice from the Help section at the parts store.

jetfixr · 03-10-2005, 10:11 PM

Thanks John that was the post I was looking for. The wheel still sticks out a bit but it looks like there about a quarter inch of material on the back of the 94 wheel that can be removed and it will sit a bit more flush.

03-10-2005, 01:37 PM	#1
jetfixr Registered User Join Date: Jan 2005 Location: Central CA Posts: 86	late model steering wheel My stock wheel was pretty thrashed so I ordered one from a 94 silverado off of ebay. There is a spacer/horn contact peice that seems to make the wheel stick out a bit farther then it should, also can't figure out how to mate the new horn cap wiring with this spacer/horn contact peice. I know this has been posted somewhere before, but with the search function down it is burried somewhere in 1241 pages =(

03-10-2005, 01:40 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Hopefully Longhorn Man sees this. He uses that wheel alot and probably has some insight. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-10-2005, 03:23 PM	#4
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	There is some horn info here __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

03-10-2005, 03:28 PM	#5
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	you can get the horn peice from the Help section at the parts store. __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi

03-10-2005, 02:47 PM	#3
72 Cheyenne402 Registered User Join Date: Feb 2005 Location: Texas Posts: 581	I Have The Same Problem

03-10-2005, 10:11 PM	#6
jetfixr Registered User Join Date: Jan 2005 Location: Central CA Posts: 86	Thanks John that was the post I was looking for. The wheel still sticks out a bit but it looks like there about a quarter inch of material on the back of the 94 wheel that can be removed and it will sit a bit more flush.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.