Will 71 swb fit on tow dolly?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972chevy4x4 · 03-11-2005, 11:35 AM

Hey all,
Going down to Ft worth to pick up my new swb but owner prefers that I tow at this time instead of drive due to length of drive. So I have access to dolly but some say it will not fit some say it will. Can anyone say for sure that it will fit, stock truck with eight inch outlaw II on the truck??? Thanks in advanced Dan

1972chevy4x4 · 03-11-2005, 11:54 AM

ttt

*dtlilly* · 03-11-2005, 12:14 PM

Check out my "The Great Saving of a C-30" thread on the 67-72 message board. I did it, and about to do it again from Milwaukee to Green Bay.

4tiresngas · 03-11-2005, 01:00 PM

I just picked up a 1969 SWB about a month ago. I used a U-HAUL car trailer. My truck has 275/60R15's all the way the around. The problem was the fenders on the trailers. My tires barely sqeezed through. I spun the back tires a lot trying to get it loaded. It was just as difficult to get it off. I used a RYDER trailer a few years back with the same size tires and did not have any difficulties.

**Joesjunk** · 03-11-2005, 01:05 PM

Dan, Did your get me email about the 4x4??

chevyfarmer · 03-11-2005, 02:46 PM

I would measure your tow dolly and have someone measure the truck to be on the safe side. I have a tow dolly that has been widened 3.5 inches per side to fit full size trucks on. I had a 72 K5 Blazer 4x4 with GM 8 inch ralleys and had to swap out the 8 inchers with 6 inchers to get it to fit on the dolly. (in the middle of the night on a dirt road covered in mud with a blown trans...... ya one of those nights)

**guyryan100** · 03-11-2005, 02:52 PM

I fix my 67 on a tow dolly and had about 3/4 of an inch clearance on each side. I'd measure it.

03-11-2005, 11:35 AM	#1
1972chevy4x4 Registered User Join Date: Feb 2003 Location: Wichita Kansas Posts: 223	Will 71 swb fit on tow dolly?? Hey all, Going down to Ft worth to pick up my new swb but owner prefers that I tow at this time instead of drive due to length of drive. So I have access to dolly but some say it will not fit some say it will. Can anyone say for sure that it will fit, stock truck with eight inch outlaw II on the truck??? Thanks in advanced Dan __________________ 1972 chevy k10 4x4 longbed 4-inch lift, 3.73 front/rears, frame off nearly complete 1972 chevy k10 4x4 longbed parts truck, known as the "ugly green machine" 1990 GMC 3/4 shortbed ext cab Always in need of 67-72 parts in central ks.

03-11-2005, 11:54 AM	#2
1972chevy4x4 Registered User Join Date: Feb 2003 Location: Wichita Kansas Posts: 223	ttt __________________ 1972 chevy k10 4x4 longbed 4-inch lift, 3.73 front/rears, frame off nearly complete 1972 chevy k10 4x4 longbed parts truck, known as the "ugly green machine" 1990 GMC 3/4 shortbed ext cab Always in need of 67-72 parts in central ks.

03-11-2005, 01:00 PM	#4
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	I just picked up a 1969 SWB about a month ago. I used a U-HAUL car trailer. My truck has 275/60R15's all the way the around. The problem was the fenders on the trailers. My tires barely sqeezed through. I spun the back tires a lot trying to get it loaded. It was just as difficult to get it off. I used a RYDER trailer a few years back with the same size tires and did not have any difficulties. __________________ Dan dan.brue@us.army.mil

03-11-2005, 01:05 PM	#5
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,693	Dan, Did your get me email about the 4x4?? __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

03-11-2005, 02:46 PM	#6
chevyfarmer Registered User Join Date: Feb 2005 Location: Owosso, Mi Posts: 242	dolly I would measure your tow dolly and have someone measure the truck to be on the safe side. I have a tow dolly that has been widened 3.5 inches per side to fit full size trucks on. I had a 72 K5 Blazer 4x4 with GM 8 inch ralleys and had to swap out the 8 inchers with 6 inchers to get it to fit on the dolly. (in the middle of the night on a dirt road covered in mud with a blown trans...... ya one of those nights) __________________ 67 short wide 355ci 3 on tree 69 short wide 250ci 3 on tree 68 long wide 283 3 on tree 72 2wd Blazer project 454 5 speed

03-11-2005, 12:14 PM	#3
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Check out my "The Great Saving of a C-30" thread on the 67-72 message board. I did it, and about to do it again from Milwaukee to Green Bay.

03-11-2005, 02:52 PM	#7
guyryan100 Registered User Join Date: Sep 2001 Location: Cumming, GA Posts: 470	I fix my 67 on a tow dolly and had about 3/4 of an inch clearance on each side. I'd measure it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.