Well, I sold the 74 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 03-12-2005, 02:31 AM

Now I'm down to only two trucks! Whats wrong with me! lol

Just waved the 74 goodbye, the kid is gonna do a total restoration on her, I look forward to progress pictures. Also brought the 89 I traded her for home, gonna tear into it tommorow. Got some minor interior stuff to work on

*1FaastC10* · 03-12-2005, 10:02 AM

Russell, i know what you're feeling man, i want to get down to 2 trucks for a while. as of right now, i've got my '77, my trail rig/project thing, and my '91. in addition i have 2 Grand Ams, a 95 and a 96. i'd really like to get down to just the DD and the '77, so that i can concentrate on both of them, and have room to work on them both as they both need it. SAS on the DD is starting to get tempting again. just gotta find a Ford D44 front axle...

**Palf70Step** · 03-12-2005, 10:14 PM

Congrats Russell.

Hoods69BadBowTie · 03-13-2005, 12:02 PM

You got any pictures of the new rig yet? Is it an automatic or a manual?
-Later

Russell · 03-13-2005, 01:36 PM

I'll snap some new pictures today. Its a TBI 305 / 700r4 combo

Hoods69BadBowTie · 03-13-2005, 03:24 PM

Kool

Lynx · 03-13-2005, 06:15 PM

You definatly got the good end of this deal.

Russell · 03-13-2005, 07:14 PM

I'd tend to say that it was a fairly fair trade. The 74 ran like a brand new truck, but had a fairly rough / multi-colored body, while this 89 has a fairly tired 305, and a slipping tranny. The interior needs a bit of work too. Body sure is dang nice though!

Russell · 03-13-2005, 08:13 PM

Alright, got some pictures for you guys:

Keep in mind this truck has 500 000 km (310 000 miles) on the clock. Both doors need some adjustment, they are kinda tough to close, and open (saggy hinges). The interior is pretty decent. The front seat has a tear and some stains in it, and it kinda smells like smoke. Not too bad though. The door panels both need new pull straps, and both doors need some lock work (driver's side door lock cylinder came undone, pass side cylinder is so worn it doesn't work anymore). The tilt needs to be rebuilt, and it needs a new dash bezel. The 305 is pretty tired -- Smokes a bit, and ticks when you first fire it up. The TBI works quite well though, the 700r4 also slips if you romp on it, but is fine if you take it easy. The truck is fully loaded (AC, pw/pl/ps, tilt, etc etc) and most everything works but the dash lights :P I plan to replace the dash with a newer one that has needle gauges / working dash lights, for now I will just use the little switch that was for the LP fuel switcher before to turn the dash lights on when I need them.

Outside is in real good shape otherwise though

If I put some time and effort into it, and not blow up the 305 / 700r4, I can likely get a good 4 - 5 grand for the truck when it comes time to put the 80 K25 back on the road

**Palf70Step** · 03-13-2005, 11:24 PM

Nice looking ride Russell.

03-12-2005, 02:31 AM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Well, I sold the 74 Now I'm down to only two trucks! Whats wrong with me! lol Just waved the 74 goodbye, the kid is gonna do a total restoration on her, I look forward to progress pictures. Also brought the 89 I traded her for home, gonna tear into it tommorow. Got some minor interior stuff to work on __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

03-12-2005, 10:14 PM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,249	Congrats Russell. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-13-2005, 12:02 PM	#4
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	You got any pictures of the new rig yet? Is it an automatic or a manual? -Later __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

03-13-2005, 01:36 PM	#5
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	I'll snap some new pictures today. Its a TBI 305 / 700r4 combo __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

03-13-2005, 03:24 PM	#6
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Kool __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

03-12-2005, 10:02 AM	#2
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	Russell, i know what you're feeling man, i want to get down to 2 trucks for a while. as of right now, i've got my '77, my trail rig/project thing, and my '91. in addition i have 2 Grand Ams, a 95 and a 96. i'd really like to get down to just the DD and the '77, so that i can concentrate on both of them, and have room to work on them both as they both need it. SAS on the DD is starting to get tempting again. just gotta find a Ford D44 front axle...

03-13-2005, 06:15 PM	#7
Lynx Registered User Join Date: Jun 2003 Location: Fort McMurray, Alberta, Canada Posts: 513	You definatly got the good end of this deal. __________________ Ben 1983 Silverado SWB 305 2002 Silverado Extended Cab 5.3 http://members.shaw.ca/bkennett

03-13-2005, 07:14 PM	#8
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	I'd tend to say that it was a fairly fair trade. The 74 ran like a brand new truck, but had a fairly rough / multi-colored body, while this 89 has a fairly tired 305, and a slipping tranny. The interior needs a bit of work too. Body sure is dang nice though! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

03-13-2005, 08:13 PM	#9
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Alright, got some pictures for you guys: Keep in mind this truck has 500 000 km (310 000 miles) on the clock. Both doors need some adjustment, they are kinda tough to close, and open (saggy hinges). The interior is pretty decent. The front seat has a tear and some stains in it, and it kinda smells like smoke. Not too bad though. The door panels both need new pull straps, and both doors need some lock work (driver's side door lock cylinder came undone, pass side cylinder is so worn it doesn't work anymore). The tilt needs to be rebuilt, and it needs a new dash bezel. The 305 is pretty tired -- Smokes a bit, and ticks when you first fire it up. The TBI works quite well though, the 700r4 also slips if you romp on it, but is fine if you take it easy. The truck is fully loaded (AC, pw/pl/ps, tilt, etc etc) and most everything works but the dash lights :P I plan to replace the dash with a newer one that has needle gauges / working dash lights, for now I will just use the little switch that was for the LP fuel switcher before to turn the dash lights on when I need them. Outside is in real good shape otherwise though If I put some time and effort into it, and not blow up the 305 / 700r4, I can likely get a good 4 - 5 grand for the truck when it comes time to put the 80 K25 back on the road Attached Images __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

03-13-2005, 11:24 PM	#10
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,249	Nice looking ride Russell. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.