Need intake casting info - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 03-14-2005, 07:07 PM

For all of you that has a 68 with a 327 and a quadrajet can you please post your casting number? Also is the divorced choke slot and screw hole straight across or diagonal from one another?

Thanks

skokie · 03-15-2005, 12:41 AM

Ttt

skokie · 03-15-2005, 02:16 PM

Ttt

shifty · 03-15-2005, 02:38 PM

I don't have that setup, but a list of carb casting numbers and info can be found here:
http://www.thecarburetorshop.com/Carburetor_ID.htm

HTH

skokie · 03-16-2005, 12:32 AM

Shifty

Thats good info. Thanks much

TTT for the intake casting number.

skokie · 03-18-2005, 07:19 PM

Last one.. TTT

JimKshortstep4x4 · 03-18-2005, 08:14 PM

I am not sure if these numbers will help or not but here is one off of one of my manifolds. 3919803 68 Q-jet, cast iron, 327 passenger, Chevelle, Nova, but truck is not listed in my book. Another casting number from my book is 3905393 Q-jet, cast iron, 327 66-68 passenger, Camara, Nova, Chevelle, but truck is not listed.

The only manifold that I see for a truck 327 is 3872783, 66-68 truck, 4bbl, cast iron, Holley carb pattern.

Sorry that I could not be of more help.

Good luck in finding a Q-Jet manifold for the trucks, I am not sure if they had one according to my book.

Jim

skokie · 03-18-2005, 11:47 PM

Jim
Thats what I thought it would be. I found my book and I get the same info. Looks like since the 327 was on its way out so they just pulled the qjet intakes from the chevelle line

Thanks Much..

03-14-2005, 07:07 PM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,335	Need intake casting info For all of you that has a 68 with a 327 and a quadrajet can you please post your casting number? Also is the divorced choke slot and screw hole straight across or diagonal from one another? Thanks __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

03-15-2005, 12:41 AM	#2
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,335	Ttt __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

03-15-2005, 02:16 PM	#3
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,335	Ttt __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

03-15-2005, 02:38 PM	#4
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	I don't have that setup, but a list of carb casting numbers and info can be found here: http://www.thecarburetorshop.com/Carburetor_ID.htm HTH __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-16-2005, 12:32 AM	#5
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,335	Shifty Thats good info. Thanks much TTT for the intake casting number. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

03-18-2005, 07:19 PM	#6
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,335	Last one.. TTT __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

03-18-2005, 08:14 PM	#7
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I am not sure if these numbers will help or not but here is one off of one of my manifolds. 3919803 68 Q-jet, cast iron, 327 passenger, Chevelle, Nova, but truck is not listed in my book. Another casting number from my book is 3905393 Q-jet, cast iron, 327 66-68 passenger, Camara, Nova, Chevelle, but truck is not listed. The only manifold that I see for a truck 327 is 3872783, 66-68 truck, 4bbl, cast iron, Holley carb pattern. Sorry that I could not be of more help. Good luck in finding a Q-Jet manifold for the trucks, I am not sure if they had one according to my book. Jim

03-18-2005, 11:47 PM	#8
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,335	Jim Thats what I thought it would be. I found my book and I get the same info. Looks like since the 327 was on its way out so they just pulled the qjet intakes from the chevelle line Thanks Much.. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.